Abstract
In this paper, we estimated the number of inkjet printer spur gear teeth from shorter pitch data strings than previous study by fixing the order in maximum entropy method (MEM). The purpose of this study is to improve the efficiency of inkjet printer model identification based on spur mark comparison method (SCM) in the field of forensic document analysis. Experiments were performed using two spur gears in different color inkjet printer models. The eight kinds of pitch data length whose length ranges from three to 10 rotations of spur gear was provided for analysis. The experimental results showed that proper teeth number was estimated from shorter pitch data string compared with the strategies based on minimum AIC estimate in our previous study. The estimation was successful from the short data length nearly equal to the condition of nyquist frequency. The proposed method was considered to improve the accuracy of printer model identification based on SCM.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Khanna, N., Mikkilineni, A.K., Chiu, G.T.C., Allebach, J.P., Delp, E.J.: Survey of Scanner and Printer Forensics at Purdue University. In: Srihari, S.N., Franke, K. (eds.) IWCF 2008. LNCS, vol. 5158, pp. 22–34. Springer, Heidelberg (2008)
Beusekom, J., Shafait, F., Breuel, M.: Document Signature Using Intrinsic Features for Counterfeit Detection. In: Srihari, S.N., Franke, K. (eds.) IWCF 2008. LNCS, vol. 5158, pp. 47–57. Springer, Heidelberg (2008)
Schulze, C., Schreyer, M., Stahl, A., Breuel, T.M.: Evaluation of Gray level-Features for Printing Technique Classification in High-Throughput Document Management Systems. In: Srihari, S.N., Franke, K. (eds.) IWCF 2008. LNCS, vol. 5158, pp. 35–46. Springer, Heidelberg (2008)
Akao, Y., Yamamoto, A., Higashikawa, Y.: Estimation of Inkjet Printer Spur Gear Teeth Number from Pitch Data String of Limited Length. In: Geradts, Z.J.M.H., Franke, K.Y., Veenman, C.J. (eds.) IWCF 2009. LNCS, vol. 5718, pp. 25–32. Springer, Heidelberg (2009)
Furukawa, T.: Detecting the Spur Marks of Ink-Jet Printed Documents Using a Multiband Scanner in NIR Mode and Image Restoration. In: Geradts, Z.J.M.H., Franke, K.Y., Veenman, C.J. (eds.) IWCF 2009. LNCS, vol. 5718, pp. 33–42. Springer, Heidelberg (2009)
Berger, C.E.H., Veenman, C.J.: Color Deconvolution and Support Vector Machines. In: Geradts, Z.J.M.H., Franke, K.Y., Veenman, C.J. (eds.) IWCF 2009. LNCS, vol. 5718, pp. 174–180. Springer, Heidelberg (2009)
Beusekom, J., Shafait, F., Breuel, T.: Automatic Line Orientation Measurement for Questioned Document Examination. In: Geradts, Z.J.M.H., Franke, K.Y., Veenman, C.J. (eds.) IWCF 2009. LNCS, vol. 5718, pp. 165–173. Springer, Heidelberg (2009)
Pan, A.I.: Advances in Thermal Inkjet Printing. In: Proceedings of the SPIE, vol. 3422, pp. 38–44 (1998)
Doherty, P.: Classification of Ink Jet Printers and Inks. J. Am. Soc. Quest. Doc. Exam. 1, 88–106 (1998)
Lewis, J.A., Kondrat, M.: Comparative Examination of Black Ink Jet Printing Inks. In: Proceedings of the 49th Annual Meeting of American Academy of Forensic Sciences, NewYork, February 17-22, p. 182 (1997)
Mazzella, W.D.: Diode Array Micro Spectrometry of Colour Ink-jet Printers. J. Am. Soc. Quest. Doc. Exam. 2, 65–73 (1999)
Davis, J.E.: An Introduction to Tool Marks, Firearms and the Striagraph, pp. 3–6. Bannerstone House, Springfield (1958)
Totty, R.N., Baxendale, D.: Defect Marks and the Identification of Photocopying Machines. J. Forensic Sci. 21, 23–30 (1981)
James, E.L.: The Classification of Office Copy Machines from Physical Characteristics. J. Forensic Sci. 32, 1293–1304 (1987)
Gerhart, F.J.: Identification of Photocopiers from Fusing Roller Defects. J. Forensic Sci. 37, 130–139 (1992)
Hardcastle, R.A.: Progressive Damage to Plastic Printwheel Typing Elements. Forensic. Sci. Int. 30, 267–274 (1986)
Moryan, D.D.: Cause of Typewriter Printwheel Damage Observed in the Questioned Document. J. Am. Soc. Quest. Doc. Exam. 1, 117–120 (1998)
Brown, J.L., Licht, G.: Using the ESDA to Visualize Typewriter Indented Markings. J. Am. Soc. Quest. Doc. Exam. 1, 113–116 (1998)
Mason, J.J., Grose, W.P.: The Individuality of Toolmarks Produced by a Label Marker Used to Write Extortion Notes. J. Forensic. Sci. 32, 137–147 (1987)
LaPorte, G.M.: The Use of an Electrostatic Detection Device to Identify Individual and Class Characteristics on Document Produced by Printers and Copiers—a Preliminary Study. J. Forensic. Sci. 49, 1–11 (2004)
Akao, Y., Kobayashi, K., Seki, Y.: Examination of spur marks found on inkjet-printed documents. J. Forensic Sci. 50, 915–923 (2005)
Akao, Y., Kobayashi, K., Sugawara, S., Seki, Y.: Discrimination of inkjet printed counterfeits by spur marks and feature extraction by spatial frequency analysis. In: van Renesse, R.F. (ed.) Optical Security and Counterfeit Deterrence Techniques IV, Proceedings of the SPIE, vol. 4677, pp. 129–137 (2002)
Akao, Y., Kobayashi, K., Seki, Y., Takasawa, N.: Examination of inkjet printed counterfeits by spur marks. In: Abstract of 4th Annual Meeting of Japanese Association of Science and Technology for Identification, Tokyo, p. 115 (1998) (in Japanese)
Maruyama, M.: inventor. Seiko Epson Corp., assignee.: Paper-pressing Mechanism for Ink Jet Printer. Japan patent 1814458, April 12 (1983)
Furukawa, T., Nemoto, N., Kawamoto, H.: Detection of Spur Marks Using Infrared Ray Scanner and Estimation for Out-of-Focus PSF. In: Abstract of 14th Annual Meeting of Japanese Association of Forensic Science and Technology, Tokyo, p. 190 (2008) (in Japanese)
Akao, Y., Kobayashi, K., Sugawara, S., Seki, Y.: Estimation of the number of spur teeth by determination of AR model order. In: Abstract of 6th Annual Meeting of Japanese Association of Science and Technology for Identification, Tokyo, vol. 170 (2000) (in Japanese)
Burg, J.P.: Maximum entropy spectral analysis. In: 37th Annual International Meeting, Soc. of Explor. Geophys., Oklahoma City, Okla, October 31 (1967)
Burg, J.P.: Maximum Entropy Spectral Analysis. In: Ph.D dissertation, Stanford Univ. (1975)
Akao, Y., Kobayashi, K., Sugawara, S., Seki, Y.: Measurement of pitch and mutual distance of spur marks by two-axes automatic scanning stage. In: Abstract of 5th Annual Meeting of Japanese Association of Science and Technology for Identification, Tokyo, p. 137 (1999) (in Japanese)
Akaike, H.: A new look on the statistical model identification. IEEE Trans. Automat. Contr. AC-19, 716–723 (1974)
Akaike, H.: Information theory and an extension of the maximum likelihood principle. In: Petrov, B.N., Csaki, F. (eds.) 2nd International Symposium on Information Theory, Akademiai Kiado, Budapest, pp. 267–281 (1973)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Akao, Y., Yamamoto, A., Higashikawa, Y. (2011). Improvement of Inkjet Printer Spur Gear Teeth Number Estimation by Fixing the Order in Maximum Entropy Spectral Analysis. In: Sako, H., Franke, K.Y., Saitoh, S. (eds) Computational Forensics. IWCF 2010. Lecture Notes in Computer Science, vol 6540. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-19376-7_9
Download citation
DOI: https://doi.org/10.1007/978-3-642-19376-7_9
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-19375-0
Online ISBN: 978-3-642-19376-7
eBook Packages: Computer ScienceComputer Science (R0)