Abstract
The present paper is a short review of some of the concepts, procedures and achieved results, oriented toward the modeling of complex, large installations, known under the name of HYPAS. Physical phenomena involved in hydraulic, pneumatic, mechanic and electric systems are depicted by mathematical models (MM) with static and dynamic nonlinearities (NL). This means that, when building large installations, the MM provide multiple NL. They should be completely known in order for the controller to be designed appropriately enough to provide desired behavior, while complying with economical conditions. To facilitate the automatic mathematical model generation, a library with multilayer models was created and are made available. This approach was necessary because the MATLAB® library provides only few general NL. In cases where applicable, neuro-fuzzy techniques were employed for modeling of NL. The paper presents some of the most important results, accompanied by their MATLAB Simulink® representation.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Baruch, et al.: A fuzzy-neural multi-model for nonlinear systems, identification and control. Fuzzy Sets and Systems 159, 2650–2667 (2008)
Baruch, I., Gortcheva, E., Thomas, F., Garrido, R.: A Neuro-Fuzzy model for nonlinear plants Identification. In: Proceedings of the IASTED International Conference Modeling and Simulation MS 1999, pp. 326–331 (1999)
Ionescu, F.: Nonlinear Mathematical Behavior and Modeling of Hydraulic Drive Systems. In: Proceedings of the 2nd World Congress of Nonlinear Analysts, Athens, Greece, vol. 30, part 3, pp. 1447–1461. Pergamon Press, Oxford (1996)
Ionescu, F., Vlad, C.I.: Tools of “HYPAS” for the Optimal Control of Electro-Hydraulic Drive Installations. In: 7th IFAC Symposium on Computer Aided Control Systems and Design, CACSD 1997, Gent, Belgium, April 28-30, pp. 311–316 (1996)
Ionescu, F., Vlad, C.I., Sugeno, C.: “HYPAS“-Fuzzy Controller Solutions for Electro-Hydraulic Drive Installations. In: Proc of 5th European Congress of Intelligent Techniques and Soft Computing, IFIP 1997, Aachen, Germany, September 8-11, pp. 1238–1242 (1997)
Ionescu, F., Vlad, C.I.: “HYPAS“and its Tools for the Optimal Control of Electron Drive Installations. Journal Benelux Organization for Automatic Control, 190–215 (1997)
Ionescu, F.: Model Generation, Simulation and Control of Hydraulic and Pneumatic Drive Systems with HYPAS. In: 6th Scandinavian International Fluid Power Conference, ISCFP 1999, Tampere, Finland, Mai 26-28, vol. II, pp. 947–961 (1999) ISBN 952-15-0181-2
Ionescu, F., Vlad, C.I.: Application of a Neuro-Fuzzy for Controller for Electro-Hydraulic Axis. In: Proceedings of 6th Scandinavian International Fluid Power Conference, SCFP 1999, Tampere, Finland, Mai 26-28, vol. II, pp. 1217–1224 (1999) ISBN 952-15-0181-2
Ionescu, F., Stefanoiu, D.: HYPAS– A Modular Structured Model Design, Simulation and Control Programming Environment. In: Proceedings of IASTED Intern Conf on Artificial and Computational Intelligence, ACI 2002, Tokyo, Japan, September 25-27, pp. 324–329. Acta Press (2002) ISBN: 0–88986 –358-X & ISSN: 1482–7913
Ionescu, F., Stefanoiu, D.: Intelligent and Allied Approaches to Hybrid Systems Modeling, Steinbeis edn., Berlin, Germany. Academic Publishing House, Sofia (2005) ISBN 3-938062-13-4, ISBN 954-322-107-3
Ionescu, F., et al.: Cell Micro and Nano Manipulations with a Hybrid Robot. In: Yih, T.C., Talpasanu, I. (eds.) Micro- and Nano Manipulations for Biomedical Applications. Artech House, Boston (2007) ISBN: 978-1-59693-254-8
Ionescu, F., Vlad, C.I., Arotaritei, D.: Advanced Control of an Electro-Hydraulic Axis. In: Bishop, R.H. (ed.) The Handbook of Mechatronics, pp. 33-1–33-28. CRC Press, USA (2003) ISBN: 0–8493–0066–5; Bishop, R.H. (ed.) The Handbook of Mechatronics, pp. 33-1–33-28. CRC Press, USA (2007) ISBN: 9780849392573
Ionescu, F., Talapasanu, I., Kostadinov, K., Hradynarski, R., Arotaritei, D.: Closed Chain Mechanism of Micro and Nano Robot for Cell Manipulations. In: Proceedings of IASTED International Conference on Robotics and Applications, RA 2007, Würzburg, Germany, pp. 340–345 (August 29-31, 2007) ISBN:Paper:978-0-88986-685-0, CD:978-0-88986-686-7
Ionescu, F.: Modeling and Simulation in Mechatronics. In: Proc of IFAC Intern. Conf., MCPL, Sibiu, Romania, September 26-29, pp. 301–312 (2007) ISBN 978-973-739-481-1
Raol, J.R., Ionescu, F.: Sensor Data Fusion using H-Infinity Filters. In: KES 2001, Knowledge-Based Intelligent Informational Engineering Systems & Allied Technologies, Osaka, Japan, September 6-8, vol. 1, pp. 515–519 (2001) ISSN 0922-6389
Stratulat, F., Ionescu, F.: Position Control of the feed Drive with Nonlinear Actuator, Servo valve and Direct Measurement. In: Proceedings of ARA 28 Annual Congress, Bochum, Germany, September 7-12, pp. 387–394 (2004) ISBN 973-632-140-1
Yakubovich, V.A., Leonov, G.A., Gelig, A.K.: Stability of stationary sets in control systems with discontinuous nonlinearities. World Scientific Publishing Company, Singapore (2004)
Stratulat, F., Ionescu, F. (ed.): Linear Control Systems, Steinbeis-Edition (2009)
Vlad, C.I., Ionescu, F., Arotaritei, D., Zaharia, M.H.: Application of Control in Mechatronics (original in Romanian). BIT, Iasi (1999) ISBN 973-96414-9-0
MATLAB/Simulink, http://www.mathworks.com/
Ionescu, F.: Computer Aided Design of Hydraulic Drive Installations. In: Baltac, V., Davidoviciu, A. (eds.) Computer Assisted Design in Mechanical, Electrical and Electronic Engineering (Original in Romanian), pp. 149–180. Romanian Academy Edition, Bucharest, C.Z. 681.142-83 (1987)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Ionescu, F., Arotaritei, D., Arghir, S., Constantin, G., Stefanoiu, D., Stratulat, F. (2011). A Library of Nonlinearities for Modeling and Simulation of Hybrid Systems. In: König, A., Dengel, A., Hinkelmann, K., Kise, K., Howlett, R.J., Jain, L.C. (eds) Knowledge-Based and Intelligent Information and Engineering Systems. KES 2011. Lecture Notes in Computer Science(), vol 6881. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-23851-2_8
Download citation
DOI: https://doi.org/10.1007/978-3-642-23851-2_8
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-23850-5
Online ISBN: 978-3-642-23851-2
eBook Packages: Computer ScienceComputer Science (R0)