Abstract
Techniques of surface modification are very important in forming final physicochemical properties and biocompability of titanium alloys. Quality of surface layer is determined by metallic ions infiltrating to body fluid and tissue environment. Performing anodization process as a final technological treatment we could minimalizing that effect. A prior mechanical treatment which could be performed in different ways, we can influence final properties. Different variants of mechanical treatment connected with anodization process require insightful quantitative evaluation. Especially surface final physicochemical properties are need to be checked in order to assess the effectiveness of metallic ions infiltration blocking on the reservoir layer, what is strongly bounded with the initiation and development of implant corrosion process. The aim of the work were the research on ways and conditions and surface treatment of Ti-6Al-4V ELI alloy for physicochemical properties to implantation applications.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Marciniak, J.: Biomateriały. Wydawnictwo Politechniki Śląskiej, Gliwice (2002)
Wierzchoń, T., Czarnowska, E., Krupa, D.: Inżynieria powierzchni w wytwarzaniu biomateriałów tytanowych. Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa (2004)
Trzaska, M., Trzaska, Z.: Elektrochemiczna spektroskopia impedancyjna w inżynierii materiałowej. Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa (2010)
Czarnowska, E., Zajączkowska, A., Major, R., Morgiel, J., Wierzchoń, T.: Kształtowanie własności implantów tytanowych metodami inżynierii powierzchni. Inżynieria Powierzchni 3, 13–18 (2007)
Walke, W., Przondziono, J.: Physicochemical properties of passive layer on the surface of guide wire used in endourology. Metalurgija 50(3), 201–204
Paszenda, Z., Tyrlik-Held, J., Nawrat, Z., Żak, J., Wilczek, J.: Usefulness of passive-carbon layer for implants applied in interventional cardiology. Journal of Materials Processing Technology 157-158C, 399–404 (2004)
Chrzanowski, W., Szewczenko, J., Tyrlik-Held, J., Marciniak, J., Zak, J.: Influence of the anodic oxidation on the physicochemical properties of the Ti6Al4V ELI alloy. Journal of Materials Processing Technology (Spec. Iss.) 162-163, 163–168 (2005)
Paszenda, Z.: Application Problems of Implants Used in Interventional Cardiology. In: Pietka, E., Kawa, J. (eds.) Information Tech. in Biomedicine. ASC, vol. 47, pp. 15–27. Springer, Heidelberg (2008)
Chrzanowski, W., Neel, E.A.A., Armitage, D.A., Lee, K., Walke, W., Knowles, J.C.: Nanomechanical evaluation of nickel-titanium surface properties after alkali and electrochemical treatments. Journal of the Royal Society Interface 5(26), 1009–1022
Szewczenko, J., Pochrząst, M., Walke, W.: Evaluation of electrochemical properties of modified Ti-6Al-4V ELI alloy. Przegląd Elektrotechniczny 87(12B), 177–180
Krauze, A., Ziębowicz, A., Marciniak, J.: Corrosion resistance of intramedullary nails used in elastic osteosynthesis of children. Journal of Materials Processing Technology (Spec. Iss.) 162-163, 209–214 (2005)
Kaczmarek, M., Walke, W., Paszenda, Z.: Application of electrochemical impedance spectroscopy in evaluation of corrosion resistance of Ni-Ti alloy. Przegląd Elektrotechniczny 87(12B), 74–77 (2011)
Basiaga, M., Paszenda, Z., Walke, W.: Study of electrochemical properties of carbon coatings used in medical devices. Przegląd Elektrotechniczny 87(12b), 12–15 (2011)
Walke, W., Przondziono, J.: A comparative study of the corrosion of wire used in urological treatment under sterilisation. Metalurgija 51(2), 237–240
Kaczmarek, M.: Investigation of pitting and crevice corrosion resistance of NiTi alloy by means of electrochemical methods. Przeglad Elektrotechniczny 86(12), 102–105 (2010)
ISO 5832/3:1996: Implants for surgery - metallic materials - Part 3: Wrought Titanium 6-Aluminium 4-Vanadium alloy
Standard ASTM F 746-04(2009)e1: Standard test method for pitting or crevice corrosion of metallic surgical implant materials (2009)
Szewczenko, J., Marciniak, J., Tyrlik-Held, J., Kiel, M.: Biokompatybilność utlenianego anodowo stopu Ti-6Al-4V ELI. Inżynieria Materiałowa 4(182), 751–755 (2011)
Narayanan, R., Seshadri, S.K.: Phosphoric acid anodization of Ti-6Al-4V - Structural and corrosion aspects. Corrosion Science 49, 542–558 (2007)
Roessler, S., Zimmermann, R., Scharnweber, D., Werner, C., Worch, H.: Characterization of oxide layers on Ti6Al4V and titanium by streaming potential and streaming current measurement. Colloids and Surfaces B: Biointerfaces 26, 387–395 (2002)
Szewczenko, J., Nowińska, K., Marciniak, J.: Influence of initial surface treatment on corrosion resistance of Ti6Al4V ELI alloy after anodizing. Electrical Review 3, 228–231 (2011)
Cabrini, M., Cigada, A., Rondelli, G., Vicentini, B.: Effect of different surface finishing and of hydroxyapatite coating on passive and corrosion current of Ti6Al4V alloy in simulated physiological solution. Biomaterials 18, 783–787 (1997)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Kiel, M., Szewczenko, J., Marciniak, J., Nowińska, K. (2012). Electrochemical Properties of Ti-6Al-4V ELI Alloy after Anodization. In: Piętka, E., Kawa, J. (eds) Information Technologies in Biomedicine. Lecture Notes in Computer Science(), vol 7339. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-31196-3_37
Download citation
DOI: https://doi.org/10.1007/978-3-642-31196-3_37
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-31195-6
Online ISBN: 978-3-642-31196-3
eBook Packages: Computer ScienceComputer Science (R0)