Abstract
Ride comfort is extremely difficult to determine because of the variations in individual sensitivity to vibration. Vibration can cause a variety of diseases or at least unpleasant feeling states. The impact of this phenomenon is subjective and depends on human perception. The vibration perception depends on values, time and frequency band of the vibration. Exposure to vibration and the human perception are strongly connected with comfort or discomfort feeling on the driver and passengers. For identification the mapping of vibration measuring in multiple points is very useful. Under the studies in question, active experiments were undertaken featuring measurements of vibration accelerations in a vertical direction perpendicular to the horizontal surface of vehicle in selected points located in carbody. The analytical experiment on application of neural networks in the identification of pressure level in tires of a vehicle based on vibration signals was conducted. Based on the results the concept of on-board comfort vibration monitoring system for vehicles was developed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Wyllie, I.H., Griffin, M.J.: Discomfort from sinusoidal oscillation in the pitch and fore-and-aft axes at frequencies between 0.2 and 1.6Hz. Journal of Sound and Vibration 324 (2009)
Burdzik, R., Konieczny, Ł., Łazarz, B.: Influence of damping characteristics changes on vehicles vibration research. In: 19th International Congress on Sound and Vibration (ICSV19), Conference Proceedings, p. 657 (2012)
Burdzik, R., Doleček, R.: Research of vibration distribution in vehicle constructive. Perner’s Contacts VII, 416-425 (2012)
Tuma, J.: Gearbox noise and vibration prediction and control. International Journal of Acoustics and Vibration 14, 99–108 (2009)
Jasiński, M., Radkowski, S.: Use of bispectral-based fault detection method in the vibroacoustic diagnosis of the gearbox. Engineering Asset Lifecycle Management, 651–660 (2010)
Michalski, R., Wierzbicki, S.: An analysis of degradation of vehicles in operation. Maintenance and Reliability 1(37), 30–32 (2008)
Grządziela, A.: Modelling of propeller shaft dynamics at pulse load. Polish Maritime Research 15(4), 52–58 (2008)
Blacha, L., Siwiec, G., Oleksiak, B.: Loss of aluminium during the process of Ti-Al-V alloy smelting in a vacuum induction melting (VIM) furnace. Metalurgija 52(3), 301–304 (2013)
Mencik, J.: Determination of parameters of visco-elastic materials by instrumented indentation. Chem. Listy 104, 275–278 (2010)
Kaźmierczak-Bałata, A., Bodzenta, J., Trefon-Radziejewska, D.: Determination of thermal-diffusivity dependence on temperature of transparent samples by thermal wave method. International Journal of Thermophysics 31(1), 180–186 (2010)
Folęga, P., Siwiec, G.: Numerical analysis of selected materials for flexsplines. Archives of Metallurgy and Materials 57(1), 185–191 (2012)
Węgrzyn, T., Wieszała, R.: Significant alloy elements in welded steel structures of car body. Archives of Materials and Metallurgy 57(1), 45–52 (2012)
Dobrzański, L.A., Bonek, M., Hajduczek, E., Klimpel, A., Lisiecki, A.: Application of high power diode laser (hpdl) for alloying of X40CRMOV5-1 steel surface layer by tungsten carbides. Journal of Materials Processing Technology 155/156, 1956–1963 (2004)
Burdzik, R.: Material vibration propagation in floor pan. Archives of Materials Science and Engineering, AMSE 59(1), 22–27 (2013)
Burdzik, R.: Monitoring system of vibration propagation in vehicles and method of analysing vibration modes. In: Mikulski, J. (ed.) TST 2012. CCIS, vol. 329, pp. 406–413. Springer, Heidelberg (2012)
Burdzik, R., Peruń, G., Warczek, J.: Application of Neural Networks in the Identification of Pressure Level in Tires of a Vehicle Based on Vibration Signals. In: 5th International Congress on Technical Diagnostics 2012, vol. 135 (2012)
Tadeusiewicz, R.: Sieci neuronowe, Warszawa (1993)
Batko, W., Cioch, W., Jamro, E.: Monitoring system for grinding machine of turbine-engine blades. Journal of Polish CIMAC 2(2), 13–18 (2007)
Farana, R., Wagnerova, R.: Sliding mode controls of complex control systems. In: Singhal, R.K., Singh, B.P. (eds.) Mine Planning and Equipment Selection, pp. 11–17 (2001)
Muzikářová, L., Franeková, M., Holečko, P., Hrnčiar, M.: Theory of information and signals. In: EDIS (2008)
Mikulski, J., Kwaśny, A.: Role of telematics in reducing the negative environmental impact of transport. In: Mikulski, J. (ed.) TST 2010. CCIS, vol. 104, pp. 11–29. Springer, Heidelberg (2010)
Mikulski, J.: Using telematics in transport. In: Mikulski, J. (ed.) TST 2010. CCIS, vol. 104, pp. 175–182. Springer, Heidelberg (2010)
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Burdzik, R., Konieczny, Ł., Figlus, T. (2013). Concept of On-Board Comfort Vibration Monitoring System for Vehicles. In: Mikulski, J. (eds) Activities of Transport Telematics. TST 2013. Communications in Computer and Information Science, vol 395. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-41647-7_51
Download citation
DOI: https://doi.org/10.1007/978-3-642-41647-7_51
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-41646-0
Online ISBN: 978-3-642-41647-7
eBook Packages: Computer ScienceComputer Science (R0)