Abstract
This paper introduces a haptic interface providing 5-DOF stylus interaction for applications requiring 3-DOF force and 2-DOF torque feedback. The interface employs two coupled Phantom Omni devices each offering 3-DOF force feedback and 6-DOF position sensing. The interface uses an inexpensive lightweight coupling and no additional actuators enabling the interface to maintain low inertia and stylus interaction, both similar to the original Phantom Omni device. The interface also maintains unconstrained rotation about the stylus’ longitudinal axis aiding in handheld manipulation. Kinematic analysis of the 5-DOF interface is presented and the usable workspace of the device is demonstrated.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Martin, J., Savall, J.: Mechanisms for haptic torque feedback. In: First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, pp. 611–614 (2005)
Boschetti, G., Rosati, G., Rossi, A.: A haptic system for robotic assisted spine surgery. In: 2005 IEEE Conference on Control Applications, pp. 19–24 (2005)
Zhu, W., Lee, Y.S.: Five-axis pencil-cut planning and virtual prototyping with 5-DOF haptic interface. Comput. Aided Des. 36(13), 1295–1307 (2004)
Ho, C.-H., Basdogan, C., Srinivasan, M.A.: Ray-based haptic rendering: force and torque interactions between a line probe and 3D objects in virtual environments. Int. J. Robot. Res. 19(7), 668–683 (2000)
Iwata, H.: Pen-based haptic virtual environment. In: IEEE Virtual Reality Annual International Symposium, Seattle, pp. 287–292 (1993)
Salcudean, S.E., Stocco, L.: Isotropy and actuator optimization in haptic interface design. In: IEEE International Conference on Robotics and Automation, San Francisco, USA (2000)
Stocco, L.J., Salcudean, S.E., Sassani, F.: Optimal kinematic design of a haptic pen. IEEE/ASME Trans. Mechatron. 6(3), 210–220 (2001)
Gosselin, F., Bidard, C., Brisset, J.: Design of a high fidelity haptic device for telesurgery. In: IEEE International Conference on Robotics and Automation, Barcelona, Spain (2005)
Gosselin, F., Ferlay, C., Bouchigny, S., Megard, C., Taha, F.: Specification and design of a new haptic interface for maxillo facial surgery. In: IEEE International Conference on Robotics and Automation, Shanghai, China, (2011)
Shah, A.V., Teuscher, S., McClain, E.W., Abbott, J.J.: How to build an inexpensive 5-DOF haptic device using two novint falcons. In: Kappers, A.M.L., van Erp, J.B.F., Bergmann Tiest, W.M., van der Helm, F.C.T. (eds.) EuroHaptics 2010, Part I. LNCS, vol. 6191, pp. 136–143. Springer, Heidelberg (2010)
Massie, T.H., Salisbury, K.J.: The PHANToM haptic interface: a device for probing virtual objects. In: 1994 ASME International Mechanical Engineering Congress and Exhibition, vol. DSC 55–1, pp. 295–302 (1994)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Isaksson, M., Horan, B., Nahavandi, S. (2014). Low-Cost 5-DOF Haptic Stylus Interaction Using Two Phantom Omni Devices. In: Auvray, M., Duriez, C. (eds) Haptics: Neuroscience, Devices, Modeling, and Applications. EuroHaptics 2014. Lecture Notes in Computer Science(), vol 8619. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-44196-1_18
Download citation
DOI: https://doi.org/10.1007/978-3-662-44196-1_18
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-44195-4
Online ISBN: 978-3-662-44196-1
eBook Packages: Computer ScienceComputer Science (R0)