Abstract
Different piezoelectric harvester interface circuits are demonstrated and compared through SPICE simulation. The simulations of the effect of switch triggering offset and switch on time duration on SSHI’s power are performed. The inductor’s quality factors in synchronized switch harvesting on inductor interface have important effect on the harvested power. Parallel SSHI shows the optimal output voltage to harvest the maximum power varies according to the Q severely. It is concluded that switch triggering offset has more impact on the s-SSHI than p-SSHI and the switch on-time duration is more important in case of the p-SSHI. p-SSHI shows when the on-time duration becomes more than 1.3 times or less than 0.7 times of exact duration time, the harvested power gets negligible. s-SSHI reveals the characteristics that when less than 1.5 times exact on-time duration, the harvested power varies significantly with the on-time duration.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Mateu L, Moll F (2005) Review of energy harvesting techniques and applications for microelectronics. In: The proceedings of the SPIE microtechnologies for the new millenium, pp 359–373
Roundy S, Wright PK, Rabaey J (2003) A study of low level vibrations as a power source for wireless sensor nodes. Comput Commun 26(11): 1131–1144
Arms SW, Townsend CP, Churchill DL, Galbreath JH, Mundell SW (2005) Power management for energy harvesting wireless sensors. In: SPIE international symposium on smart structures and smart materials. San Diego, CA
Glynne-Jones P, Tudor MJ, Beeby SP, White NM (2004) An electromagnetic vibration-powered generator for intelligent sensor systems. Sens Actuators A 110:344–349
Mitcheson PD, Green TC, Yeatman EM, Holmes AS (2004) Architectures for vibration driven micropower generators. IEEE J Microelectromech Syst 13:429–440
Roundy S, Wright PK (2004) A piezoelectric vibration based generator for wireless electronics. Proc Smart Mater Struct 13:1131–1142
Ottman G, Hofmann H, Bhatt A, Lesieutre G (2002) Adaptive piezoelectric energy harvesting circuit for wireless remote power supply. IEEE Trans Power Electron 17(5):669–676
Lefeuvre E, Badel A, Richard C, Petit L, Guyomar D (2006) A comparison between several vibration-powered piezoelectric generators for standalone systems. Sens Actuators A 126:405–416
Guyomar D, Badel A, Lefeuvre E, Richard C (2005) Toward energy harvesting using active materials and conversion improvement by nonlinear processing. IEEE Trans Ultrason Ferroelectr Freq Control 52:584–595
LTspice IV, http://www.linear.com/designtools/software/
Acknowledgments
This work was supported by the Industrial Strategic technology development program, 10041766, Development of energy management technologies with small capacity based on marine resources funded by the Ministry of Knowledge Economy (MKE, Korea) and this work (Grants No. R00045044) was supported by Business for Cooperative R&D between Industry, Academy, and Research Institute funded Korea Small and Medium Business Administration.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media Dordrecht(Outside the USA)
About this paper
Cite this paper
Park, J.W., Kim, H., Shin, CS., Cho, K., Cho, YY., Kim, K. (2013). The Simulation Study on Harvested Power in Synchronized Switch Harvesting on Inductor. In: Park, J., Ng, JY., Jeong, HY., Waluyo, B. (eds) Multimedia and Ubiquitous Engineering. Lecture Notes in Electrical Engineering, vol 240. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-6738-6_85
Download citation
DOI: https://doi.org/10.1007/978-94-007-6738-6_85
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-6737-9
Online ISBN: 978-94-007-6738-6
eBook Packages: EngineeringEngineering (R0)