Abstract
Under the background of lightweight design, manufacturing and improvement of comprehensive performance, dissimilar metals connection has been becoming a research focus recently and will have a broad application prospect. Titanium alloy TC4 and 304 stainless steel have many excellent properties, achievement of effective connection between these two materials has a significant promoting effect on Industrial Technology. However, the bonding connection of TC4/304 is very poor, so it is necessary to redesign the joint and further study the strengthening mechanism. In the paper, connection experiment of TC4/304 was carried out using two methods: Electron Beam Welding and Friction Stir Welding. Optical microscopy, SEM, EDS were applied for the analysis of microstructure and phase structure. The results state that EBW and FSW are effective and the maximum strength are 196 Mpa and 178 Mpa respectively. Both failure mode are brittle fracture.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Isaev, V.I., Cherepanov, A.N., Shapeev, V.P.: Numerical study of heat modes of laser welding of dissimilar metals with an intermediate insert. Int. J. Heat Mass Transf. 99, 711–720 (2016)
Junaid, M., Baig, M.N., Shamir, M., et al.: A comparative study of pulsed laser and pulsed TIG welding of Ti-5Al-2.5 Sn titanium alloy sheet. J. Mater. Process. Technol. 242, 24–38 (2017)
Guo, S., Zhou, Q., Peng, Y., et al.: Study on strengthening mechanism of Ti/Cu electron beam welding. Mater. Des. 121, 51–60 (2017)
Cui, L.I., Bin, L.I., Ze-Feng, W.U., et al.: Stitch welding of Ti-6Al-4V titanium alloy by fiber laser. Trans. Nonferr. Met. Soc. China 27(1), 91–101 (2017)
Lu, Z., Shi, L., Zhu, S., et al.: Effect of high energy shot peening pressure on the stress corrosion cracking of the weld joint of 304 austenitic stainless steel. Mater. Sci. Eng. A 637, 170–174 (2015)
Ma, N., Cai, Z., Huang, H., et al.: Investigation of welding residual stress in flash-butt joint of U71Mn rail steel by numerical simulation and experiment. Mater. Des. 88, 1296–1309 (2015)
Ma, H., Qin, G., Geng, P., et al.: Microstructure characterization and properties of carbon steel to stainless steel dissimilar metal joint made by friction welding. Mater. Des. 86, 587–597 (2015)
Zhang, Y., Sun, D.Q., Gu, X.Y., et al.: A hybrid joint based on two kinds of bonding mechanisms for titanium alloy and stainless steel by pulsed laser welding. Mater. Lett. 185, 152–155 (2016)
Chen, S., Zhang, M., Huang, J., et al.: Microstructures and mechanical property of laser butt welding of titanium alloy to stainless steel. Mater. Des. 53(1), 504–511 (2014)
Shanmugarajan, B., Padmanabham, G.: Fusion welding studies using laser on Ti-SS dissimilar combination. Opt. Lasers Eng. 50(11), 1621–1627 (2012)
Kumar, R., Balasubramanian, M.: Experimental investigation of Ti-6Al-4V titanium alloy and 304L stainless steel friction welded with copper interlayer. Def. Technol. 11, 65–75 (2015)
Wang, T., Zhang, B., Wang, H., et al.: Microstructures and mechanical properties of electron beam-welded titanium-steel joints with vanadium, nickel, copper and silver filler metals. J. Mater. Eng. Perform. 23(4), 1498–1504 (2014)
Wang, T., Zhang, B., Feng, J.C.: Influences of different filler metals on electron beam welding of titanium alloy to stainless steel. Trans. Nonferr. Met. Soc. China 24(1), 108–114 (2014)
Wang, T., Zhang, B., Feng, J., et al.: Effect of a copper filler metal on the microstructure and mechanical properties of electron beam welded titanium-stainless steel joint. Mater. Charact. 73(7), 104–113 (2012)
Guo, S., Zhou, Q., Kong, J., et al.: Effect of beam offset on the characteristics of copper/304 stainless steel electron beam welding. Vacuum 128, 205–212 (2016)
Acknowledgements
Thanks for the National Natural Science Foundations of China, Grant nos. 51375243, 51505226 and the Natural Science Foundation of Jiangsu Province, Grant no. BK20140784 supporting.
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Guo, S. et al. (2017). Study on Lightweight Design and Connection of Dissimilar Metals of Titanium Alloy TC4/T2 Copper/304 Stainless Steel. In: Li, K., Xue, Y., Cui, S., Niu, Q., Yang, Z., Luk, P. (eds) Advanced Computational Methods in Energy, Power, Electric Vehicles, and Their Integration. ICSEE LSMS 2017 2017. Communications in Computer and Information Science, vol 763. Springer, Singapore. https://doi.org/10.1007/978-981-10-6364-0_23
Download citation
DOI: https://doi.org/10.1007/978-981-10-6364-0_23
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-6363-3
Online ISBN: 978-981-10-6364-0
eBook Packages: Computer ScienceComputer Science (R0)