Abstract
The cerebrospinal fluid (CSF) flow in the spinal cord is important in maintaining the stability of the central nervous system. However, the interaction between CSF and spinal cord is not well understood. A three-dimensional (3D) simplified finite element model (FEM) of a sheep CSF and spinal cord segment was developed, verified using clinical experimental data, and used to investigate the effect of deformations and stress distributions on spinal cord in normal physiological conditions. The commercial software ANSYS Workbench was adopted to simulate the unidirectional CSF flow along the coaxial tube, which considered the bi-directional fluid-solid coupling. It was demonstrated that CSF had a slight impact on the spinal cord, which was transmitted to the white and gray matter through the pia mater. The pia mater protected the normal physiological function of the white and gray matter while the spinal dura mater ensured the regular rate and pressure of CSF. It was also showed that the CSF flow in the spinal cord was laminar. This model might help us to better understand the mechanism of interaction between CSF and spinal cord and provide a baseline for mechanical comparisons in spinal cord injury.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Mardal, K.A., Rutkowska, G., Linge, S., et al.: Estimation of CSF flow resistance in the upper cervical spine. Neuroradiol. J. 26(1), 106–110 (2013)
Cirovic, S.: A coaxial tube model of the cerebrospinal fluid pulse propagation in the spinal column. J. Biomech. Eng. 131(2), 021008 (2009)
Greaves, C.Y., Gadala, M.S., Oxland, T.R.: A three-dimensional finite element model of the cervical spine with spinal cord: an investigation of three injury mechanisms. Ann. Biomed. Eng. 36(3), 396–405 (2008)
Li, X.F., Dai, L.Y.: Three-dimensional finite element model of the cervical spinal cord: preliminary results of injury mechanism analysis. Spine 34(11), 1140–1147 (2009)
Maikos, J.T., Qian, Z., Metaxas, D., et al.: Finite element analysis of spinal cord injury in the rat. J. Neurotrauma 25(7), 795–816 (2008)
Lakin, W.D., Stevens, S.A., Tranmer, B.I., Penar, P.L.: A whole-body mathematical model for intracranialpressure dynamics. J. Math. Biol. 46(4), 347 (2003)
Zhong, Z.C., Wei, S.H., Wang, J.P., et al.: Finite element analysis of the lumbar spine with a new cage using a topology optimization method. Med. Eng. Phys. 28(1), 90–98 (2006)
Denoziere, G., Ku, D.N.: Biomechanical comparison between fusion of two vertebrae and implantation of an artificial inter-vertebral disc. J. Biomech. 39(4), 766–775 (2006)
Ozawa, H., Matsumoto, T., Ohashi, T., et al.: Mechanical properties and function of the spinal pia mater. J. Neurosurg. Spine 1(1), 122–127 (2004)
Zarzur, E.: Mechanical properties of the human lumbar duramater. Arq Neuropsiquiatr. 54(3), 455–460 (1996)
Xu, C., Yan, Y.-B., Wu, Z.-X., et al.: 3D finite element analysis on injury mechanism of spinal cord compression. Med. Biomech. 4, 306–312 (2014)
Acknowledgments
The study was financially supported by the National Science Foundation of China (Grant Ref. No. 81541122).
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Liu, X., Luo, D., Hu, P., Yu, M., Rong, Q. (2017). Modelling and Analysis of the Cerebrospinal Fluid Flow in the Spinal Cord. In: Fei, M., Ma, S., Li, X., Sun, X., Jia, L., Su, Z. (eds) Advanced Computational Methods in Life System Modeling and Simulation. ICSEE LSMS 2017 2017. Communications in Computer and Information Science, vol 761. Springer, Singapore. https://doi.org/10.1007/978-981-10-6370-1_8
Download citation
DOI: https://doi.org/10.1007/978-981-10-6370-1_8
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-6369-5
Online ISBN: 978-981-10-6370-1
eBook Packages: Computer ScienceComputer Science (R0)