Abstract
Based on computer software (FLUENT) to simulate the diversion region and heat exchange region of herringbone plate heat exchanger. An internal fluid model of a diversion zone and a heat exchange zone consisting of two sets of plates with different geometrical parameters was established. The velocity, temperature and pressure distribution of the flow field in the model were analyzed to investigate the effect of different tilt angles and peak spacings on the heat transfer performance of the herringbone plate heat exchanger under the same arc radius. The results show that when the peak spacing h = 20 mm, the herringbone plate with radius of arc R = 180 mm the inclination \(\phi = 20^{ \circ }\) has better heat transfer performance than the herringbone plate with the radius of arc R = 140 mm the inclination \(\phi = 30^{ \circ }\). Provides basis for optimizing design of diversion zone of herringbone plate heat exchanger plate.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wang Xi, and Hang Huaizhi. 2017. The flow and heat transfer mechanism of the corrugated channel of the plate heat exchanger. Journal of Chemical Industry and Engineering (China) (S1): 71–82 (in Chinese).
Shujing, Qin, and Ye Wenbang. 2003. Chemical equipment design book—Heat exchanger, 176–182. Beijing: Chemical Industry Press (in Chinese).
Zhai Zhijian, Zhang Guanmin et al. 2007. Mechanism of corrugated geometric parameters on flow patterns in herringbone plate heat exchangers. Journal of Shandong University (Engineering Science) (37) (in Chinese).
Zhang, Guan-min, and Mao-cheng Tian. 2006. Simulation and analysis of flow pattern in cross—Corrugated plate heat exchangers. Journal of Hydrodynamics 18 (5): 547–551 (in Chinese).
Mehrabian, M.A., and R. Poulter. 2000. Hydrodynamics and thermal characteristics of corrugated channels: Computational approach. Applied Mathematical Modeling 24 (5–6): 343–364.
Zhang Jing, Wen Wei et al. 2015. Heat transfer and flow analysis of plate heat exchanger and optimization of ripple parameters based on numerical simulation of computational fluid dynamics. Chinese Journal of Mechanical Engineering 12: 137 (in Chinese).
Yang Chonglin. 1998. Plate heat exchanger engineering design manual, 78–82. Beijing: Mechanical Industry Press (in Chinese).
Koen Grijspeer, Birinchi Hazarika, and Dean Vucinic. 2003. Application of computational fluid dynamics to model the hydro dynamics of plate heat exchangers for milk processing. Journal of Food Engineering.
Wu Jinxing, Wei Xinli et al. 2006. Performance analysis of baffle bar heat exchanger based on CFD technology. Light Industry Machinery 24 (2): 61–63.
Lv Shuwei. 2015. Analysis of flow characteristics in the plate diversion zone of plate heat exchanger. Changchun City, Jilin Province, 2055 Yan’an Street: Changchun University of Technology, 4 (in Chinese).
Acknowledgements
This study was supported by Jilin Province Science and Technology Development Plan Item (No. 20190302045GX), Program for Innovative Research Team of Jilin Engineering Normal University.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Lv, S., Yang, Z. (2020). Based on Computer Software to Analysis the Influence of Geometry Parameters of Herringbone Plate Heat Exchanger Plate on Heat Exchange Performance. In: Huang, C., Chan, YW., Yen, N. (eds) Data Processing Techniques and Applications for Cyber-Physical Systems (DPTA 2019). Advances in Intelligent Systems and Computing, vol 1088. Springer, Singapore. https://doi.org/10.1007/978-981-15-1468-5_63
Download citation
DOI: https://doi.org/10.1007/978-981-15-1468-5_63
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-1467-8
Online ISBN: 978-981-15-1468-5
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)