Abstract
Aiming at the problem of contact force control of objects with different dynamic characteristics in the process of hand-object interaction of dexterous hands, this paper proposes a contact force control algorithm of dexterous hands based on admittance control, which combines the adaptive rate of admittance parameters and takes the calculation amount of environmental (grasping object) dynamic model as feedforward input. In the process of interaction between hands and objects, the adaptability of objects is maintained to achieve the flexible grasp of objects with different dynamic characteristics. In addition, in order to deploy the control algorithm in the actual physical system, this paper designs and develops the layered control system of multi-fingered dexterous hand. Finally, in order to verify the effectiveness of the control algorithm and control system studied in this paper, Experiments were designed for multi-sensor data acquisition, joint Angle closed-loop control, fingertip Cartesian space pose control and contact force control of objects with different dynamic characteristics. The experimental results show that the control system studied in this paper can collect data from the multi-sensor system of the multi-fingered dexterous hand, and can conduct closed-loop control of joint Angle and fingertip pose according to the data acquisition results. In addition, the control effect of contact force between the dexterous finger end and objects with different dynamic characteristics is verified by experiments. Thus, the effectiveness of position control and force control algorithms for dexterous hands is verified.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zheng, Y., Qian, W.: Improving grasp quality evaluation. Robot. Auton. Syst. 57(6–7), 665–673 (2009)
Aleotti, J., Caselli, S.: Interactive teaching of task oriented robot grasps. Robot. Auton. Syst. 58(5), 539–550 (2010)
Han, J., Chenghai, W.: Robot transition control based on states feedback. Robot 19(6), 412–419 (1997)
Gu, H.: Research on Cross-coupled Control Scheme For Dexterous Hand Based on Neural Network. Heilongjiang: Harbin Institute of Technology 2011
Haiqiang, Q.: A Thesis Submitted to Chongqing University in Partial Fulfillment of the Requirement for the Master’s Degree of Engineering. Chongqing University, Chongqing (2013)
Tondu, B., Lopez, P.: Modeling and control of McKibben artificial muscle robot actuators. Control Syst. IEEE 20(2), 15–38 (2002)
Mills, J., Goldenberg, A.: Force and position control of manipulators during constrained motion tasks. IEEE Trans. Robot. Autom. 5(1), 30–46 (1989)
Raibert, M., Craig, J.: Hybrid position/force control of manipulators. J. Dyn. Syst. Meas. Contr. 103, 126 (1981)
Hogan, N.: Impedance control-an approach to manipulation. I-Theory. II-Implementation. III-Applications. ASME Trans. Dyn. Syst. Meas. Control 107 (1985)
Lasky, T.A., Hsia, T.C.: On force tracking impedance control of robot manipulators. In: Proceedings. 1991 IEEE International Conference on Robotics and Automation, pp. 274−275. IEEE Computer Society (1991)
Seraji, H., Colbaugh, R.: Force tracking in impedance control. IEEE. In: Proceedings of IEEE International Conference on Robotics and Automation, pp. 499–506 (1997)
Odhner, L.U., Jentoft, L.P., Claffee, M.R., et al.: A compliant, underactuated hand for robust manipulation. Int. J. Robot. Res. 33(5), 736–752 (2014)
Fusaomi, N., Takanori, M., Shintaro, T., et al.: Impedance model force control using a neural network based effective stiffness estimator for a desktop nc machine tool. J. Manuf. Syst. 2010(28), 78–87 (2009)
Dong, Y., Ren, B.: UDE based variable impedance control of uncertain robot systems. IEEE Trans. Syst. Man Cyber. Syst. 49(12), 2487–2498 (2019)
He, W., Dong, Y.: Adaptive fuzzy neural network control for a constrained robot using impedance learning. IEEE Trans. Neural Netw. Learn. Syst. 29(4), 1174−1186 (2017)
Kanakis, G.S., Dimeas, F., Rovithakis, G.A., Doulgeri, Z.: Prescribed contact establishment of a robot with a planar surface under position and stiffness uncertainties. Robot. Auton. Syst. 104, 99−108 (2018)
Lange, F., Bertleff, W., Suppa, M.: Force and trajectory control of industrial robots in stiff contact. In: 2013 IEEE International Conference on Robotics and Automation, pp. 2927−2934. IEEE (2013)
Roveda, L., Pedrocchi, N., Tosatti, L.M.: Exploiting impedance shaping approaches to overcome force overshoots in delicate interaction tasks. Int. J. Adv. Robot. Syst. 13(5), 24–35 (2016)
Acknowledgments
This work was supported by the Key Research and Development Program of Zhejiang (Grand No. 2021C04015), Zhejiang Provincial Natural Science Foundation of China (Grand No. LZ23E050005, Q23E050071) and the Fundamental Research Funds for the Provincial Universities of Zhejiang (Grand No. RF-C2019004).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Wu, C., Wang, Z., Zhang, Y., Ma, X., Meng, H., Bao, G. (2023). Dexterous Hand-Object Interaction Control Based on Adaptive Impedance Algorithm. In: Yang, H., et al. Intelligent Robotics and Applications. ICIRA 2023. Lecture Notes in Computer Science(), vol 14269. Springer, Singapore. https://doi.org/10.1007/978-981-99-6489-5_1
Download citation
DOI: https://doi.org/10.1007/978-981-99-6489-5_1
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-6488-8
Online ISBN: 978-981-99-6489-5
eBook Packages: Computer ScienceComputer Science (R0)