Skip to main content
SpringerLink
Log in

Integrated Direct/Indirect Adaptive Robust Control for Electrical Driven Injection Machine Mold Closing with Accurate Parameter Estimations

  • Conference paper
  • First Online:
Intelligent Robotics and Applications (ICIRA 2023)

Part of the book series: Lecture Notes in Computer Science ((LNAI,volume 14271))

Included in the following conference series:

  • 746 Accesses

Abstract

In this paper, the control issue of the mold closing system of Injection machine is studied. In actual application, there are two major control problems needed to be addressed in controller design: to ensure the quality of products, the precision of mold needs to be guaranteed; the operation parameters of the machines are willing to be recorded for analysis, such as health monitoring and prognosis. However, the existing controllers usually rely on the servo motor, where the dynamics of the mold closing system is not taken into consideration, that may lead to degraded tracking performances. Moreover, the uncertain model parameters are usually ignored or simply treated as disturbances. Instead in this paper, the nonlinear dynamic model of mold closing system is first proposed including parameter uncertainties and disturbances for controller design. Subsequently, an integrated direct/indirect adaptive robust control law(DIARC) is proposed that not only achieves excellent tracking performance but also attenuates the parameter uncertainties with accurate parameter learning. Comparative experiments are carried out to verify our proposed approach and the results demonstrate the effectiveness of the integrated direct/indirect adaptive robust control.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 79.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 99.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Chen, Z., Li, C., Yao, B., Yuan, M., Yang, C.: Integrated coordinated/synchronized contouring control of a dual-linear-motor-driven gantry. IEEE Trans. Industr. Electron. 67(5), 3944–3954 (2019)

    Article  Google Scholar 

  2. Chen, Z., Pan, Y., Gu, J.: Integrated adaptive robust control for multilateral teleoperation systems under arbitrary time delays. Int. J. Robust Nonlinear Contr. 26(12), 2708–2728 (2016)

    Google Scholar 

  3. Chen, Z., Pan, Y.J., Gu, J.: A novel adaptive robust control architecture for bilateral teleoperation systems under time-varying delays. Int. J. Robust Nonlinear Control 25(17), 3349–3366 (2015)

    Google Scholar 

  4. Chen, Z., Yao, B., Wang, Q.: Accurate motion control of linear motors with adaptive robust compensation of nonlinear electromagnetic field effect. IEEE/ASME Trans. Mechatron. 18(3), 1122–1129 (2013)

    Article  Google Scholar 

  5. Chen, Z., Yao, B., Wang, Q.: \(\mu \)-synthesis-based adaptive robust control of linear motor driven stages with high-frequency dynamics: a case study. IEEE/ASME Trans. Mechatron. 20(3), 1482–1490 (2015)

    Article  Google Scholar 

  6. Cui, Z.h., Li, S.l.: Speed control of the all electric injection molding machine based on the grey prediction fuzzy pid. J. Shandong Univ. Technol. (Natural Science Edition) (2015)

    Google Scholar 

  7. Hu, C., Yao, B., Wang, Q.: Integrated direct/indirect adaptive robust contouring control of a biaxial gantry with accurate parameter estimations. Automatica 46(4), 701–707 (2010)

    Article  MathSciNet  MATH  Google Scholar 

  8. Kumar, S., Park, H.S., Lee, C.M.: Data-driven smart control of injection molding process. CIRP J. Manuf. Sci. Technol. 31, 439–449 (2020)

    Article  Google Scholar 

  9. Li, C., Li, C., Chen, Z., Yao, B.: Adaptive thrust allocation based synchronization control of a dual drive gantry stage. Mechatronics 54, 68–77 (2018)

    Article  Google Scholar 

  10. Liao, J., Chen, Z., Yao, B.: Model-based coordinated control of four-wheel independently driven skid steer mobile robot with wheel-ground interaction and wheel dynamics. IEEE Trans. Industr. Inf. 15(3), 1742–1752 (2018)

    Article  Google Scholar 

  11. Liao, J., Yuan, H., Song, W., Gu, J.: Adaptive robust fault detection and control for injection machine mold closing process with accurate parameter estimations. In: 2021 IEEE International Conference on Mechatronics (ICM), pp. 1–6. IEEE (2021)

    Google Scholar 

  12. Lin, C.Y., Shen, F.C., Wu, K.T., Lee, H.H., Hwang, S.J.: Injection molding process control of servo-hydraulic system. Appl. Sci. 10(1), 71 (2020)

    Article  Google Scholar 

  13. Moreira, E.E., et al.: Industry 4.0: Real-time monitoring of an injection molding tool for smart predictive maintenance. In: 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), vol. 1, pp. 1209–1212. IEEE (2020)

    Google Scholar 

  14. Pierleoni, P., Palma, L., Belli, A., Sabbatini, L.: Using plastic injection moulding machine process parameters for predictive maintenance purposes. In: 2020 International Conference on Intelligent Engineering and Management (ICIEM), pp. 115–120. IEEE (2020)

    Google Scholar 

  15. Sun, W., Tang, S., Gao, H., Zhao, J.: Two time-scale tracking control of nonholonomic wheeled mobile robots. IEEE Trans. Control Syst. Technol. 24(6), 2059–2069 (2016)

    Article  Google Scholar 

  16. Sun, W., Zhao, Z., Gao, H.: Saturated adaptive robust control for active suspension systems. IEEE Trans. Indust. Electron. 60(9), 3889–3896 (2013)

    Article  Google Scholar 

  17. Veligorskyi, O., Chakirov, R., Khomenko, M., Vagapov, Y.: Artificial neural network motor control for full-electric injection moulding machine. In: 2019 IEEE International Conference on Industrial Technology (ICIT), pp. 60–65. IEEE (2019)

    Google Scholar 

  18. Xiong, L., Han, W., Yu, Z.: Adaptive sliding mode pressure control for an electro-hydraulic brake system via desired-state and integral-antiwindup compensation. Mechatronics 68, 102359 (2020)

    Article  Google Scholar 

  19. Yao, B., Jiang, C.: Advanced motion control: from classical PID to nonlinear adaptive robust control. In: 2010 11th IEEE International Workshop on Advanced Motion Control (AMC), pp. 815–829. IEEE (2010)

    Google Scholar 

  20. Yao, J., Jiao, Z., Ma, D.: Extended-state-observer-based output feedback nonlinear robust control of hydraulic systems with backstepping. IEEE Trans. Industr. Electron. 61(61), 6285–6293 (2014)

    Article  Google Scholar 

  21. Yao, J., Jiao, Z., Ma, D., Yan, L.: High-accuracy tracking control of hydraulic rotary actuators with modeling uncertainties. IEEE/ASME Trans. Mechatron. 19(2), 633–641 (2014)

    Article  Google Scholar 

  22. Yong, K., Chen, M., Shi, Y., Wu, Q.: Flexible performance-based robust control for a class of nonlinear systems with input saturation. Automatica 122, 109268 (2020)

    Article  MathSciNet  MATH  Google Scholar 

  23. Yu, S., Zeng, L.: Control strategy of screw motion during plasticizing phase for all-electric injection molding machine. Int. J. Autom. Technol. 12(2), 215–222 (2018)

    Article  Google Scholar 

  24. Zhang, Y., Xi, D., Yang, H., Tao, F., Wang, Z.: Cloud manufacturing based service encapsulation and optimal configuration method for injection molding machine. J. Intell. Manuf. 30(7), 2681–2699 (2019)

    Article  Google Scholar 

Download references

Acknowledgement

This research was supported by Zhejiang Provincial Natural Science Foundation of China Grant No. LQ23F030009 and also supported by Key Research Project of Zhejiang Lab (No. G2021NB0AL03).

Author information

Authors and Affiliations

  1. Research Center for Intelligent Robotics, Zhejiang Engineering Research Center for Intelligent Robotics, Zhejiang Lab, Hangzhou, Hangzhou, China

    Jianfeng Liao, Shiqiang Zhu, Qiwei Meng & Wei Song

  2. Zhejiang University, Hangzhou, China

    Jianfeng Liao, Shiqiang Zhu, Qiwei Meng, Wei Song & Jason Gu

  3. Department of Electrical and Computer Engineering, Dalhousie University, Halifax, Canada

    Jason Gu

Authors
  1. Jianfeng Liao
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Shiqiang Zhu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Qiwei Meng
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Wei Song
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Jason Gu
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Jianfeng Liao .

Editor information

Editors and Affiliations

  1. Zhejiang University, Hangzhou, China

    Huayong Yang

  2. Harbin Institute of Technology, Shenzhen, China

    Honghai Liu

  3. Zhejiang University, Hangzhou, China

    Jun Zou

  4. Huazhong University of Science and Technology, Wuhan, China

    Zhouping Yin

  5. Shenyang Institute of Automation, Shenyang, Liaoning, China

    Lianqing Liu

  6. Zhejiang University, Hangzhou, China

    Geng Yang

  7. Zhejiang University, Hangzhou, China

    Xiaoping Ouyang

  8. Harbin Institute of Technology, Shenzhen, China

    Zhiyong Wang

Rights and permissions

Reprints and permissions

Copyright information

© 2023 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Liao, J., Zhu, S., Meng, Q., Song, W., Gu, J. (2023). Integrated Direct/Indirect Adaptive Robust Control for Electrical Driven Injection Machine Mold Closing with Accurate Parameter Estimations. In: Yang, H., et al. Intelligent Robotics and Applications. ICIRA 2023. Lecture Notes in Computer Science(), vol 14271. Springer, Singapore. https://doi.org/10.1007/978-981-99-6495-6_16

Download citation

  • DOI: https://doi.org/10.1007/978-981-99-6495-6_16

  • Published:

  • Publisher Name: Springer, Singapore

  • Print ISBN: 978-981-99-6494-9

  • Online ISBN: 978-981-99-6495-6

  • eBook Packages: Computer ScienceComputer Science (R0)

Publish with us

Policies and ethics

Search

Navigation