Abstract
Whilst most of the literature on topology optimization of structures deals with so-called selfadjoint problems involving highly idealized, single-purpose structures, this paper discusses topology optimization of multi-purpose structures which concerns “nonselfadjoint” problems. General methods based on the so-called “layout theory”, application to trusses and perforated plates and computational difficulties are discussed.
Similar content being viewed by others
References
Allaire G, Kohn RV (1993) Explicit bounds on the elastic energy of a two-phase composite in two space dimensions. Q. Appl. Math. 51:675–699
Beckers M, Fleury C (1997) Topology optimization involving discrete variables. Proc. Second World Congress on Structural and Multidisciplinary Optimization, held in Zakopane, May 1997 Polish Academy of Sciences, Warsaw
Bendsøe MP (1995) Optimization of structural topology, shape and material. Springer, Berlin
Bendsøe MP, Haber RB (1993) The Michell layout problem as a low volume fraction limit of the perforated plate topology optimization problem: an asymptotic study. Struct. Optim. 6:263–267
Birker T (1996) New developments in structural optimization using optimality criteria. Doctoral Dissertation, FB 10, Univ. Essen, Germany; Also: Report Series 18, No. 171, VDI-Verlag, Düsseldorf
Birker T, Lewiński T, Rozvany GIN (1994) A well-posed nonselfadjoint layout problem: Least-weight plane truss for one load condition and two displacement constraints. Struct. Optim. 8:195–205
Cheng GD, Guo X (1997) ε-relaxed approach in structural topology. Struct. Optim. 13:258–266
Cheng K-T, Jiang Z (1992) Study on topology optimization with stress constraints. Eng. Opt. 20:129–148
Gerdes D (1994) Strukturoptimierung unter Anwendung der Optimalit↦skriterien auf diskretisierte Tragwerke bei besonderer Berücksichtigung der Stabilität. Doctoral Dissertation, FB 10, Univ. Essen, Germany; Report Series 18, No. 171, VDI-Verlag, Düsseldorf
Haber RB, Jog CS, Bendsøe MP (1996) A new approach to variable-topology shape design using a constraint on perimeter. Struct. Optim. 11:1–12
Jog C, Haber RB, Bendsoe M (1994) Topology design with optimized self-adaptive materials. Int. J. Meth. Engrg. 37:1323–1350
Károlyi G, Rozvany GIN (1997) Exact analytical solutions for non-selfadjoint variable topology shape optimization problems: Perforated cantilever plates in plane stress subject to displacement constraints. Part I. Struct. Optim. 13:119–127
Kirsch U (1990) On singular topologies in structural design. Struct. Optim. 12:133–142
Lurie KA (1994) Direct relaxation of optimal layout problems for plates. JOTA 80:93–116
Lurie KA (1995a) On direct relaxation of optimal material design problems for plates. WSSIAA 5:271–296
Lurie KA (1995b) An optimal plate. In: Olhoff, N. Rozvany, G.I.N. (eds.) Proc. First World Cong. on Structural and Multidisciplinary Optimization, pp. 169–176 Pergamon, Oxford
Lune KA, Cherkaev AV, Fedorov AV (1982) Regularization of optimal design problems for bars and plates. Parts I-III. JOTA 37:499–522, 523–543; 42:247–282
Michell AGM (1904) The limits of economy of material in frame-structures. Phil. Mag. 8:589–597
Rozvany GIN (1992) Optimal layout theory: analytical solutions for elastic structures with several deflection constraints and load conditions. Struct. Optim. 4:247–249
Rozvany GIN (1996) Difficulties in truss topology optimization with stress, local buckling and system buckling constraints. Struct. Optim. 11:213–217
Rozvany GIN, Bendsøe MP, Kirsch U (1995) Layout optimization of structures. Appl. Mech. Rev. 48, 2:41–118
Rozvany GIN, Birker T (1994) On singular topologies in exact layout optimization. Struct. Optim. 8:228–235
Rozvany GIN, Birker T (1995) Generalized Michell structures — exact least-weight truss layouts for combined stress and displacement constraints. Part I — General theory for plane trusses. Struct. Optim. 9:178–188
Rozvany GIN, Birker T, Lewiński T (1994) Some unexpected properties of exact least-weight plane truss layouts with displacement constraints for several load consitions. Struct. Optim. 7:76–86
Rozvany GIN, Olhoff N, Bendsøe MP, Ong TG, Szeto WT (1985/87) Least-weight design of perforated elastic plates. DCAMM Report No. 306. Techn. Univ. Denmark, Lyngby; also: Int. J. Solids Struct. 23:521–536, 537–550
Rozvany GIN, Sobieszczanski-Sobieski J (1992) New optimality criteria methods: forcing uniqueness of the adjoint strains by corner-rounding at constraint interesections. Struct. Optim. 4: 244–246
Rozvany GIN, Zhou M et al. (1989/90) Continuum type optimality criteria methods for large finite element systems with a displacement constraint. Parts I and II. Struct. Optim. 1:47–72; 2:77–104
Rozvany GIN, Zhou M, Birker T (1992) Generalized shape optmization without homogenization. Struct. Optim. 4:250–252
Sved G, Ginos Z (1968) Structural optimization under multiple loading. Int. J. Mech. Sci. 10:803–805
Zhou M (1996) Difficulties in truss topology optimization with stress and local buckling constraints. Struct. Optim. 11:134–136
Zhou M, Rozvany GIN (1992/1993) DCOC: An optimality criteria method for large systems. Part I: Theory. Part II: Algorithm. Struct. Optim. 5:12–25; 6:250–262
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Rozvany, G.I.N. Topology optimization of multi-purpose structures. Mathematical Methods of Operations Research 47, 265–287 (1998). https://doi.org/10.1007/BF01194401
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01194401