Abstract
In this paper a new method of modeling nonlinear friction as a function of both position and velocity is introduced. The proposed empirical model uses spectral analysis to identify the main sources of position dependent friction in complex mechanisms. In addition, the model describes the contribution to the overall friction of every moving part of the mechanism. In the paper, the proposed spectral-based modeling technique is used to describe static friction and sliding friction (which includes negative damping friction) of the first joint of PUMA 560 robot. This is the first friction model truly capable of describing nonlinear friction in complex mechanical systems.
Supported by a grant from MRCO, Ontario, Canada.
Preview
Unable to display preview. Download preview PDF.
References
Armstrong B., Control of Machines with Friction, Kluwer Academic Publishers, Boston, USA, 1991.
Bloomfield P., Fourier Analysis of Time Series — An Introduction, John Wiley and Sons, New York, 1976.
Canudas de Wit C., Adaptive Control for Partially Known Systems, Elsevier, Boston, USA, 1988.
Dupont P.E., “Avoiding Stick-Slip in Position and Force Control Through Feedback”, Proc. IEEE Int. Conf. on Robotics and Automation, 1991, pp. 1470–1475.
Haessig D.A., and Friedland B., “On the Modelling and Simulation of Friction”, J. of Dynamic Systems, Measurement, and Control, Vol. 113, September 1991, pp.354–362.
Hess D.P. and Soom A., “Friction at a Lubricated Line Contact Operating at Oscillating Sliding Velocities”, J. of Tribology, Vol.122(1), 1990, pp.147–152.
Higuchi T. and Hojjat Y., “Application of Electromagnetic Impulsive Force to Precise Positioning”, IFAC 10th Triennial World Congress, 1987, pp.283–288.
Nishimura T., and Ishizuka K., Canon Laser Rotary Encoders, Motion, Canon Inc., Tokyo, September/October 1986.
Popović M.R., Gorinevsky D.M., and Goldenberg A.A., “Fuzzy Logic Controller for Accurate Positioning of Direct-Drive Mechanism Using Force Pulses”, Proc. of IEEE Int. Conf. on Robotics and Automation, Vol.1, 1995, pp.1166–1171.
Popović M.R., Friction Modeling and Control, PhD Thesis, University of Toronto, Toronto, Canada, 1996.
Popović M.R., and Goldenberg A.A., “Friction Diagnostics and Modeling Using DFT Analysis”, to appear in Proc. of IEEE Int. Conf. on Robotics and Automation, 1997.
Southward S.C., Radcliffe C.J., and MacCluer C.R., “Robust Nonlinear Stick-Slip Friction Compensation”, ASME Winter Annual Meeting, 1990, ASME paper No. 90-WM/DAC-8, 7 pages.
Unimate PUMA Robot Manual 398H, Unimation Robotics, A Condec Company, Connecticut, USA, 1980.
Yang S. and Tomizuka M., “Adaptive Pulse Width Control for Precise Positioning Under the Influence of Stiction and Coulomb Friction”, Trans. ASME J. Dynam. Syst. Meas. and Control, September 1988, Vol. 110, No3, pp.221–227.
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 1998 Springer-Verlag London Limited
About this paper
Cite this paper
Popović, M.R., Goldenberg, A.A. (1998). Modeling of nonlinear friction in complex mechanisms using spectral analysis. In: Casals, A., de Almeida, A.T. (eds) Experimental Robotics V. Lecture Notes in Control and Information Sciences, vol 232. Springer, Berlin, Heidelberg. https://doi.org/10.1007/BFb0112980
Download citation
DOI: https://doi.org/10.1007/BFb0112980
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-76218-8
Online ISBN: 978-3-540-40920-5
eBook Packages: Springer Book Archive