Abstract
To design the tunnel excavations, the most important parameters are the engineering properties of rock, e.g., Young’s modulus (E) and unconfined compressive strength (UCS). Numerous researchers have attempted to propose methods to estimate E and UCS indirectly. This task is complex due to the difficulty of preparing and carrying out such experiments in a laboratory. The main aim of the present study is to propose a new and efficient machine learning model to predict E and UCS. The proposed model combines the extreme gradient boosting machine (XGBoost) with the firefly algorithm (FA), called the XGBoost-FA model. To verify the feasibility of the XGBoost-FA model, a support vector machine (SVM), classical XGBoost, and radial basis function neural network (RBFN) were also employed. Forty-five granite sample sets, collected from the Pahang-Selangor tunnel, Malaysia, were used in the modeling. Several statistical functions, such as coefficient of determination (R2), mean absolute percentage error (MAPE) and root mean square error (RMSE) were calculated to check the acceptability of the methods mentioned above. A review of the results of the proposed models revealed that the XGBoost-FA was more feasible than the others in predicting both E and UCS and could generalize.
Similar content being viewed by others
References
Singh R, Kainthola A, Singh TN (2012) Estimation of elastic constant of rocks using an ANFIS approach. Appl Soft Comput 12(1):40–45
Monjezi M, Khoshalan HA, Razifard M (2012) A neuro-genetic network for predicting uniaxial compressive strength of rocks. Geotech Geol Eng 30(4):1053–1062
Yilmaz I, Sendir H (2002) Correlation of Schmidt hardness with unconfined compressive strength and Young’s modulus in gypsum from Sivas (Turkey). Eng Geol 66(3):211–219
Gokceoglu C, Zorlu K (2004) A fuzzy model to predict the unconfined compressive strength and modulus of elasticity of a problematic rock. Eng Appl Artif Intell 17:61–72
Kahraman S (2014) The determination of uniaxial compressive strength from point load strength for pyroclastic rocks. Eng Geol 170:33–42
Kahraman S (2001) Evaluation of simple methods for assessing the uniaxial compressive strength of rock. Int J Rock Mech Min Sci 38:981–994
Cobanglu I, Celik S (2008) Estimation of uniaxial compressive strength from point load strength, Schmidt hardness and P-wave velocity. Bull Eng Geol Environ 67:491–498
Kahraman S, Fener M, Kozman E (2012) Predicting the compressive and tensile strength of rocks from indentation hardness index. J S Afr Inst Min Metall 112(5):331–339
Nazir R, Momeni E, Jahed Armaghani D, Mohd Amin MF (2013) Correlation between unconfined compressive strength and indirect tensile strength of limestone rock samples. Electr J Geotech Eng 18:1737–1746
Singh RN, Hassani FP, Elkington PAS (1983) The application of strength and deformation index testing to the stability assessment of coal measures excavations. Proceeding of 24th US symposium on rock mechanism. Texas A and M University, AEG, Balkema, pp 599–609
Yasar E, Erdogan Y (2004) Estimation of rock physiomechanical properties using hardness methods. Eng Geol 71:281–288
Nazir R, Momeni E, JahedArmaghani D, Mohd Amin MF (2013) Prediction of unconfined compressive strength of limestone rock samples using L-type Schmidt hammer. Electr J Geotech Eng 18:1767–1775
Karaman K, Kesimal A (2014) A comparative study of Schmidt hammer test methods for estimating the uniaxial compressive strength of rocks. Bull Eng Geol Environ. https://doi.org/10.1007/s10064-014-0617-5
Moradian ZA, Ghazvinian AH, Ahmadi M, Behnia M (2010) Predicting slake durability index of soft sandstone using indirect tests. Int J Rock Mech Min Sci 47(4):666–671
Yagiz S (2011) Correlation between slake durability and rock properties for some carbonate rocks. Bull Eng Geol Environ 70(3):377–383
Sulukcu S, Ulusay R (2001) Evaluation of the block punch index test with particular reference to the size effect, failure mechanism and its effectiveness in predicting rock strength. Int J Rock Mech Min Sci 38:1091–1111
Basu A, Aydin A (2006) Predicting uniaxial compressive strength by point load test: significance of cone penetration. Rock Mech Rock Eng 39:483–490
Tandon RS, Gupta V (2015) Estimation of strength characteristics of different Himalayan rocks from Schmidt hammer rebound, point load index, and compressional wave velocity. Bull Eng Geol Environ 74:521–533
Yilmaz I, Yuksek G (2009) Prediction of the strength and elasticity modulus of gypsum using multiple regression, ANN, and ANFIS models. Int J Rock Mech Min Sci 46(4):803–810
Dehghan S, Sattari GH, Chehreh CS, Aliabadi MA (2010) Prediction of unconfined compressive strength and modulus of elasticity for Travertine samples using regression and artificial neural networks. Min Sci Technol 20:0041–0046
Beiki M, Majdi A, Givshad AD (2013) Application of genetic programming to predict the uniaxial compressive strength and elastic modulus of carbonate rocks. Int J Rock Mech Min Sci 63:159–169
O’Rourke JE (1989) Rock index properties for geoengineering in underground development. Min Eng 41:106–110
Rezaei M, Majdi A, Monjezi M (2012) An intelligent approach to predict unconfined compressive strength of rock surrounding access tunnels in longwall coal mining. Neural Comput Appl 24(1):233–241
Singh R, Vishal V, Singh TN et al (2013) A comparative study of generalized regression neural network approach and adaptive neuro-fuzzy inference systems for prediction of unconfined compressive strength of rocks. Neural Comput Appl 23:499–506
Suthar M (2020) Applying several machine learning approaches for prediction of unconfined compressive strength of stabilized pond ashes. Neural Comput Appl 32:9019–9028. https://doi.org/10.1007/s00521-019-04411-6
Kumar S, Prasad A (2019) Strength retrieval of artificially cemented bauxite residue using machine learning: an alternative design approach based on response surface methodology. Neural Comput Appl 31:6535–6548
Tinoco J, Alberto A, da Venda P et al (2019) A novel approach based on soft computing techniques for unconfined compression strength prediction of soil cement mixtures. Neural Comput Appl. https://doi.org/10.1007/s00521-019-04399-z
Tekin E, Akbas SO (2019) Predicting groutability of granular soils using adaptive neuro-fuzzy inference system. Neural Comput Appl 31:1091–1101
Sun Y et al (2019) Determination of Young’s modulus of jet grouted coalcretes using an intelligent model. Eng Geol 252:43–53
Sun Y, Zhang J, Li G, Wang Y, Sun J, Jiang C (2019) Optimized neural network using beetle antennae search for predicting the unconfined compressive strength of jet grouting coalcretes. Int J Numer Anal Meth Geomech 43(4):801–813
Sun Y, Li G, Zhang N, Chang Q, Xu J, Zhang J (2020) Development of ensemble learning models to evaluate the strength of coal-grout materials. Int J Min Sci Technol. https://doi.org/10.1016/j.ijmst.2020.09.002
Zhang WG et al (2020) State-of-the-art review of soft computing applications in underground excavations. Geosci Front 11:1095–1106
Zhang WG, Goh ATC (2016) Multivariate adaptive regression splines and neural network models for prediction of pile drivability. Geosci Front 7:45–52
Zhang WG et al (2020) Soft computing approach for prediction of surface settlement induced by earth pressure balance shield tunneling. Undergr Space. https://doi.org/10.1016/j.undsp.2019.12.003
Jahed Armaghani D, Tonnizam Mohamad E, Momeni E, Sundaram Narayanasamy M, Mohd Amin MF (2015) An adaptive neuro-fuzzy inference system for predicting unconfined compressive strength and Young’s modulus: a study on Main Range granite. Bull Eng Geol Env 74:1301–1319
Jahed Armaghani D, Tonnizam Mohamad E, Sundaram Narayanasamy M, Narita N, Yagiz S (2017) Development of hybrid intelligent models for predicting TBM penetration rate in hard rock condition. Tunn Undergr Space Technol 63:29–43
Gao J, Koopialipoor M, Armaghani DJ, Ghabussi A, Baharom S, Morasaei A, Shariati A, Khorami M, Zhou J (2020) Evaluating the bond strength of FRP in concrete samples using machine learning methods. Smart Struct Syst 26(4):403–418
Gao J, Amar MN, Motahari MR, Hasanipanah M, Armaghani DJ (2020) Two novel combined systems for predicting the peak shear strength using RBFNN and meta-heuristic computing paradigms. Eng Comput. https://doi.org/10.1007/s00366-020-01059-y
Zhou J, Qiu Y, Zhu S, Armaghani DJ, Khandelwal M, Mohamad ET (2020) Estimation of the TBM advance rate under hard rock conditions using XGBoost and Bayesian optimization. Underg Space. https://doi.org/10.1016/j.undsp.2020.05.008
Zhou J, Qiu Y, Armaghani DJ, Zhang W, Li C, Zhu S, Tarinejad R (2020) Predicting TBM penetration rate in hard rock condition: a comparative study among six XGB-based metaheuristic techniques. Geosci Front. https://doi.org/10.1016/j.gsf.2020.09.020
Zhou J, Li X, Shi X (2012) Long-term prediction model of rockburst in underground openings using heuristic algorithms and support vector machines. Saf Sci 50(4):629–644
Zhou J, Li X, Mitri HS (2016) Classification of rockburst in underground projects: comparison of ten supervised learning methods. J Comput Civil Eng 30(5):04016003
Zhou J, Qiu Y, Zhu S, Armaghani DJ, Li C, Nguyen H, Yagiz S (2021) Optimization of support vector machine through the use of metaheuristic algorithms in forecasting TBM advance rate. Eng Appl Artif Intell 97:104015. https://doi.org/10.1016/j.engappai.2020.104015
Meulenkamp F, Grima MA (1999) Application of neural networks for the prediction of the unconfined compressive strength (UCS) from Equotip hardness. Int J Rock Mech Min Sci 36(1):29–39
Sonmez H, Tuncay E, Gokceoglu C (2004) Models to predict the uniaxial compressive strength and the modulus of elasticity for Ankara Agglomerate. Int J Rock Mech Min Sci 41(5):717–729
Mishra DA, Basu A (2013) Estimation of uniaxial compressive strength of rock materials by index tests using regression analysis and fuzzy inference system. Eng Geol 160:54–68
Cevik A, Sezer EA, Cabalar AF, Gokceoglu C (2011) Modeling of the uniaxial compressive strength of some clay-bearing rocks using neural network. Appl Soft Comput 11(2):2587–2594
Yesiloglu-Gultekin N, Gokceoglu C, Sezer EA (2013) Prediction of uniaxial compressive strength of granitic rocks by various nonlinear tools and comparison of their performances. Int J Rock Mech Min Sci 62:113–122
Singh VK, Singh D, Singh TN (2001) Prediction of strength properties of some schistose rocks from petrographic properties using artificial neural networks. Int J Rock Mech Min Sci 38(2):269–284
Gokceoglu C (2002) A fuzzy triangular chart to predict the uniaxial compressive strength of the Ankara agglomerates from their petrographic composition. Eng Geol 66(1):39–51
Zorlu K, Gokceoglu C, Ocakoglu F, Nefeslioglu HA, Acikalin S (2008) Prediction of uniaxial compressive strength of sandstones using petrography-based models. Eng Geol 96(3):141–158
Yagiz S, Sezer EA, Gokceoglu C (2012) Artificial neural networks and nonlinear regression techniques to assess the influence of slake durability cycles on the prediction of uniaxial compressive strength and modulus of elasticity for carbonate rocks. Int J Numer Anal Method 36(14):1636–1650
Sun Y, Li G, Zhang J (2020) Developing hybrid machine learning models for estimating the unconfined compressive strength of jet grouting composite: a comparative study. Appl Sci 10:1612. https://doi.org/10.3390/app10051612
Barham WS, Rababah SR, Aldeeky HH et al (2020) Mechanical and physical based artificial neural network models for the prediction of the unconfined compressive strength of rock. Geotech Geol Eng 38:4779–4792. https://doi.org/10.1007/s10706-020-01327-0
Sun J, Zhang J, Gu Y, Huang Y, Sun Y, Ma G (2019) Prediction of permeability and unconfined compressive strength of pervious concrete using evolved support vector regression. Constr Build Mater 207:440–449
Lu X, Zhou W, Ding X, Shi X, Luan B, Li M (2019) Ensemble learning regression for estimating unconfined compressive strength of cemented paste backfill. IEEE Access 7:72125–72133
Rezaei M, Asadizadeh M (2020) Predicting unconfined compressive strength of intact rock using new hybrid intelligent models. J Min Environ 11(1):231–246
ISRM (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Hudson JA (ed) Ulusay R. International Society for Rock Mechanics, Suggested methods prepared by the commission on testing methods
Tianqi C, Guestrin C (2016) Xgboost: a scalable tree boosting system. In: Proceedings of the 22nd acm sigkdd international conference on knowledge discovery and data mining, ACM, pp 785–794
Yang XS (2010) Firefly algorithm, stochastic test functions and design optimisation. IJBIC 2:78
Wusi C, Hasanipanah M, Nikafshan HR, Jahed DA, Tahir MM (2019) A new design of evolutionary hybrid optimization of SVR model in predicting the blast-induced ground vibration. Eng Comput. https://doi.org/10.1007/s00366-019-00895-x
Haiqing Y, Nikafshan HR, Hasanipanah M, Bakhshandeh HA, Nekouie A (2019) Prediction of vibration velocity generated in mine blasting using support vector regression improved by optimization algorithms. Natl Resour Res. https://doi.org/10.1007/s11053-019-09597-z
Shan S (2016) Support vector machine. Machine learning models and algorithms for big data classification. Springer, Boston, pp 207–235
Nikafshan Rad H, Hasanipanah M, Rezaei M, Lotfi Eghlim A (2018) Developing a least squares support vector machine for estimating the blast-induced flyrock. Eng Comput 34:709–717
Hossam F, Aljarah I, Mirjalili S (2017) Evolving radial basis function networks using moth–flame optimizer. Handbook of neural computation. Academic Press, London, pp 537–550
Samui P, Kothari DP (2011) Utilization of a least square support vector machine (LSSVM) for slope stability analysis. Sci Iran 18(1):53–58
Monjezi M, Hasanipanah M, Khandelwal M (2013) Evaluation and prediction of blast-induced ground vibration at Shur River Dam, Iran, by artificial neural network. Neural Comput Appl 22(7–8):1637–1643
Hasanipanah M, Faradonbeh RS, Amnieh HB, Armaghani DJ, Monjezi M (2017) Forecasting blast induced ground vibration developing a CART model. Eng Comput 33(2):307–316
Hasanipanah M, Armaghani DJ, Amnieh HB, Majid MZA, Tahir MMD (2017) Application of PSO to develop a powerful equation for prediction of flyrock due to blasting. Neural Comput Appl 28(1):1043–1050
Qi C, Fourie A, Chen Q (2018) Neural network and particle swarm optimization for predicting the unconfined compressive strength of cemented paste backfill. Constr Build Mater 159:473–478
Hasanipanah M, Bakhshandeh Amnieh H, Arab H, Zamzam MS (2018) Feasibility of PSO–ANFIS model to estimate rock fragmentation produced by mine blasting. Neural Comput Appl 30(4):1015–1024
Qi C, Fourie A, Du X, Tang X (2018) Prediction of open stope hangingwall stability using random forests. Nat Hazards 92(2):1179–1197
Hasanipanah M et al (2018) Prediction of an environmental issue of mine blasting: an imperialistic competitive algorithm based fuzzy system. Int J Environ Sci Technol 15(3):551–560
Luo Z, Hasanipanah M, Amnieh HB, Brindhadevi K, Tahir MM (2019) GA-SVR: a novel hybrid data-driven model to simulate vertical load capacity of driven piles. Eng Comput. https://doi.org/10.1007/s00366-019-00858-2
Keshtegar B, Hasanipanah M, Bakhshayeshi I, Sarafraz ME (2020) A novel nonlinear modeling for the prediction of blast-induced airblast using a modified conjugate FR method. Measurement 131:35–41
Zhou J, Nekouie A, Arslan CA, Pham BT, Hasanipanah M (2020) Novel approach for forecasting the blast-induced AOp using a hybrid fuzzy system and firefly algorithm. Eng Comput 36(2):703–712
Hasanipanah M, Bakhshandeh HA (2020) Developing a new uncertain rule-based fuzzy approach for evaluating the blast-induced backbreak. Eng Comput. https://doi.org/10.1007/s00366-019-00919-6
Ceryan N, Samui P (2020) Application of soft computing methods in predicting uniaxial compressive strength of the volcanic rocks with different weathering degree. Arab J Geosci 13(7):1–18
Ding X, Hasanipanah M, Rad HN, Zhou W (2020) Predicting the blast-induced vibration velocity using a bagged support vector regression optimized with firefly algorithm. Eng Comput. https://doi.org/10.1007/s00366-020-00937-9
Hasanipanah M, Zhang W, Armaghani DJ, Rad HN (2020) The potential application of a new intelligent based approach in predicting the tensile strength of rock. IEEE Access 8:57148–57157
Kumar M, Samui P (2020) Reliability analysis of settlement of pile group in clay using LSSVM, GMDH. GPR Geotechn Geolog Eng 38(6):6717–6730
Qi C (2020) Big data management in the mining industry. Int J Miner Metall Mater 27(2):131–139
Hasanipanah M, Meng D, Keshtegar B, Trung NT, Thai DK (2020) Nonlinear models based on enhanced Kriging interpolation for prediction of rock joint shear strength. Neural Comput Appl. https://doi.org/10.1007/s00521-020-05252-4
Kaloop MR, Kumar D, Samui P, Hu JW, Kim D (2020) Compressive strength prediction of high-performance concrete using gradient tree boosting machine. Constr Build Mater 264:120198
Hasanipanah M, Bakhshandeh HA (2020) A fuzzy rule-based approach to address uncertainty in risk assessment and prediction of blast-induced flyrock in a quarry. Nat Resour Res. https://doi.org/10.1007/s11053-020-09616-4
Kumar S, Rai B, Biswas R, Samui P, Kim D (2020) Prediction of rapid chloride permeability of self-compacting concrete using multivariate adaptive regression spline and minimax probability machine regression. J Build Eng 32:101490
Hasanipanah M, Keshtegar B, Thai DK, Troung NT (2020) An ANN-adaptive dynamical harmony search algorithm to approximate the flyrock resulting from blasting. Eng Comput. https://doi.org/10.1007/s00366-020-01105-9
Asheghi R, Abbaszadeh Shahri A, Khorsand Zak M (2019) Prediction of uniaxial compressive strength of different quarried rocks using metaheuristic algorithm. Arab J Sci Eng. https://doi.org/10.1007/s13369-019-04046-8
Rezaei M (2017) Feasibility of novel techniques to predict the elastic modulus of rocks based on the laboratory data. Int J Geotech Eng. https://doi.org/10.1080/19386362.2017.1397873
Jing H, Rad HN, Hasanipanah M, Armaghani DJ, Qasem SN (2020) Design and implementation of a new tuned hybrid intelligent model to predict the uniaxial compressive strength of the rock using SFS-ANFIS. Eng Comput. https://doi.org/10.1007/s00366-020-00977-1
Fattahi H (2017) Applying soft computing methods to predict the uniaxial compressive strength of rocks from schmidt hammer rebound values. Comput Geosci 21:665–681
Jahed Armaghani D et al (2016) Prediction of the uniaxial compressive strength of sandstone using various modeling techniques. Int J Rock Mech Min Sci 85:174–186
Yang Y, Zhang O (1997) A hierarchical analysis for rock engineering using artificial neural networks. Rock Mech Rock Eng 30(4):207–222
Xie C, Nguyen H, Bui XN, Choi Y, Zhou J, Nguyen-Trang T (2020) Predicting rock size distribution in mine blasting using various novel soft computing models based on meta-heuristics and machine learning algorithms. Geosci Front. https://doi.org/10.1016/j.gsf.2020.11.005
Zhou J, Li C, Arslan CA, Hasanipanah M, Amnieh HB (2019) Performance evaluation of hybrid FFA-ANFIS and GA-ANFIS models to predict particle size distribution of a muck-pile after blasting. Eng Comput. https://doi.org/10.1007/s00366-019-00822-0
Li E, Zhou J, Shi X, Armaghani DJ, Yu Z, Chen X, Huang P (2020) Developing a hybrid model of salp swarm algorithm-based support vector machine to predict the strength of fiber-reinforced cemented paste backfill. Eng Comput. https://doi.org/10.1007/s00366-020-01014-x
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Cao, J., Gao, J., Nikafshan Rad, H. et al. A novel systematic and evolved approach based on XGBoost-firefly algorithm to predict Young’s modulus and unconfined compressive strength of rock. Engineering with Computers 38 (Suppl 5), 3829–3845 (2022). https://doi.org/10.1007/s00366-020-01241-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00366-020-01241-2