Abstract
In this study, the applicability of Artificial Neural Networks (ANNs) has been investigated for predicting the performance and emission characteristics of a diesel engine fuelled with Waste cooking oil (WCO). ANN modeling was done using multilayer perception (MLP) and radial basis functions (RBF). In the radial basis functions, centers were initialized by two different methods namely random selection method and using clustering algorithm. In the clustering method, center initialization was done using FCM (Fuzzy \(c\) means) and CDWFCM (cluster dependent weighted fuzzy \(c\) means) algorithms. The networks were trained using the experimental data, wherein load percentage, compression ratio, blend percentage, injection timing and injection pressure were taken as the input parameters and brake thermal efficiency, brake specific energy consumption, exhaust gas temperature and engine emissions were used as the output parameters. The investigation showed that ANN predicted results matched well with the experimental results over a wide range of operating conditions for both models. A comparison was made between ANN models and regression models. ANN performed better than the regression models. Similarly a comparison of MLP and RBF indicated that RBF with CDWFCM performed better than MLP networks with lower Mean Relative Error (MRE) and higher accuracy of prediction.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig1_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig4_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig6_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig7_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig8_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig9_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig10_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig11_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs00500-015-1666-9/MediaObjects/500_2015_1666_Fig12_HTML.gif)
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
Agarwal AK, Rajamanoharan K (2009) Experimental investigations of performance and emissions of Karanja oil and its blends in a single cylinder agricultural diesel engine. Appl Energy 86:106–112
Alavi AH, Gandomi AH (2011) Chap 9: Applications of computational intelligence in behavior simulation of concrete materials. In: Yang XS, Koziel S (eds) Computational optimization and applications in engineering and industry. Studies in computational intelligence, vol 359. Springer, Heidelberg, pp 221–243
Arroyo Á, Corchado E, Tricio V, García-Hernández L, Snášel V (2013) Soft computing techniques applied to a case study of air quality in industrial areas in the Czech Republic. Advances in intelligent systems and computing, vol 188. Springer, Berlin, pp 537–546
Canakci M, Ozsezen N (2005) Evaluating waste cooking oils as alternative diesel fuel. G U J Sci 18:81–91
Canakci M, Erdil A, Arcakliglu E (2006) Performance and exhaust emissions of a biodiesel engine. Appl Energy 83:594–604
Celikten AE (2005) A diesel engine’s performance and exhaust emissions using ANN. Appl Energy 80:11–22
Chiang K-T, Chang F-P (2006) Application of response surface methodology in the parametric optimization of a fin pin type heat sink. Int Commun Heat Mass Transf 33:836–845
Chintalpundi KK, Kam M (1998) A noise resistant fuzzy c means algorithm for clustering. In: IEEE conference on fuzzy systems
Gandomi AH, Alavi AH (2011) Prediction of principal ground-motion parameters using a hybrid method coupling artificial neural networks and simulated annealing. Comput Struct 89(23–24):2176–2194
Gandomi AH, Gandomi M, Sadat Hosseini SS (2009) Prediction of maximum dry density and optimum moisture content of stabilized soil using RBF neural networks. IES J A Civ Struct Eng 2(2):98–106
García EM, Rodríguez MLM, Jiménez-Come MJ, Espinosa FT, Domínguez IT (2011) Prediction of peak concentrations of PM10 in the area of Campo de Gibraltar (Spain) using classification models. Soft computing models in industrial and environmental applications, 6th international conference SOCO. Advances in intelligent and soft computing, vol 87. Springer, Berlin, pp 203–212
Ghodadian B, Rahimi H, Nikbakyh AM, Yusaf TF (2009) Diesel engine performance using waste cooking biodiesel with ANN. Renew Energy 34:976–982
Hadjahmadi AH, Homayounpour MM, Ahadi SM (2008) Robust weighted fuzzy C means clustering. In: IEEE international conference on fuzzy systems. 978-1-4244-1819
Haykin S (1998) Neural networks: a comprehensive foundation. Mac-Millan, Newyork
Neural Network Toolbox\(^{TM 6}\)(2008) Mathworks-R2008
Papadopoulos VD, Beligiannis GN, Hela DG (2011) Combining experimental design and artificial neural networks for the determination of chlorinated compounds in fish using matrix solid-phase dispersion. Appl Soft Comput 11:5155–5164
Ramdas AS, Jayaraj S, Muraleedharan C (2004) Use of vegetable oils as IC engine fuel. A review. Renew Energy 29:727–742
Sayin C, Ertunc HM (2007) Performance and exhaust emissions from a gasoline engine using ANN. Appl Therm Eng 27:46–54
Srinivasa Pai P (2004) Acoustic emission based tool wear monitoring using some improved neural network methodologies. Ph.D Thesis, S.J. college of engineering, University of Mysore, Mysore
Srinivasa Pai P, Nagabhushan TN, Ramakrishna Rao PK, Rao RBKN (2003) Radial basis function neural networks for tool wear monitoring. Int J COMADEM 5:21–30
Suresh Kumar R, Velraj RG (2008) Performance and emissions of a C.I engine fuelled with PPME and its blends with diesel. Renew Energy 82:1311–1325
Tomasevic AV, Siler-Marinkovic SS (2006) Methanolysis of used frying oil. Fuel Process Technol 81:1–6
Utlu Z, Kocak MS (2008) Effect of biodiesel obtained from waste cooking oil on diesel engine performance and exhaust emissions. Renew Energy 33:1936–1941
Venkateshwara Rao T, Prabhakar Rao G, Hema Chandra Reddy K (2008) Experimental investigation of pongamia, Jatropa, Neem metyl esters as biodiesel in CI engine. JJMIE 2:117–122
Zheng S, Khates M, Dube MA (2006) Acid-catalyzed production of biodiesel from waste frying oil. Biomass Bioenergy 30:267–272
Author information
Authors and Affiliations
Corresponding author
Additional information
Communicated by V. Loia.
Rights and permissions
About this article
Cite this article
Kumar, S., Pai, P.S., Rao, B.R.S. et al. Prediction of performance and emission characteristics in a biodiesel engine using WCO ester: a comparative study of neural networks. Soft Comput 20, 2665–2676 (2016). https://doi.org/10.1007/s00500-015-1666-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00500-015-1666-9