Abstract
The optimum selection of material in manufacturing environment should be investigated using a strategic perspective because of its complex nature. The ideal alternative cannot be found easily due to the different criteria, so the decision maker has to consider several factors for selecting the appropriate material. As a result, the decision maker should design a proper form of decision support system to solve the given problem. From decision-maker perspective, it is not easy to determine criteria weights of materials selection problem. Especially, several criteria cause inadequate subjective evaluation. In order to prevent this, different novel hybrid models were developed by using indifference threshold-based attribute ratio analysis (ITARA), VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR) technique for order of preference by similarity to ideal solution (TOPSIS) and multi-objective optimization on the basis of ratio (MOORA) methods. Two case studies (material selection of flywheel and cryogenic storage tank) were taken from the literature to test these models. ITARA is used to calculate the criteria weights in the problems, and the final rankings are obtained by using VIKOR, TOPSIS and MOORA. The results indicate that the proposed methods produced successful results in terms of material selection perspective.
Similar content being viewed by others
Abbreviations
- AHP:
-
Analytic hierarchy process
- ANP:
-
Analytic network process
- ARAS:
-
Additive ratio assessment
- COPRAS:
-
Complex proportional assessment
- DEMATEL:
-
Decision-making trial and evaluation laboratory
- ELECTRE:
-
Elimination and choice translating reality
- EXPROM2:
-
Extended PROMETHEE II
- EVAMIX:
-
Evaluation of mixed data
- GRA:
-
Grey relational analysis
- GTMA:
-
Graph theory and matrix approach
- ITARA:
-
Indifference threshold-based attribute ratio analysis
- MCDM:
-
Multi-criteria decision making
- MOORA:
-
Multi-objective optimization on the basis of ratio analysis
- OCRA:
-
Occupational repetitive actions
- TODIM:
-
An acronym in Portuguese of interactive and multi-criteria decision making
- TOPSIS:
-
Technique for order of preference by similarity to ideal solution
- VIKOR:
-
VlseKriterijumska Optimizacija I Kompromisno Resenje (Serbian term)
- WPM:
-
Weighted product method
References
Brauers WKM, Zavadskas EK (2012) Robustness of MULTIMOORA: a method for multi-objective optimization. Informatica 23(1):1–25
Çalışkan H, Kurşuncu B, Kurbanoğlu C, Güven ŞY (2013) Material selection for the tool holder working under hard milling conditions using different multi criteria decision making methods. Mater Des 45:473–479
Chatterjee P, Chakraborty S (2012) Material selection using preferential ranking methods. Mater Des 35:384–393
Chatterjee P, Athawale VM, Chakraborty S (2009) Selection of materials using compromise ranking and outranking methods. Mater Des 30:4043–4053
Chatterjee P, Athawale VM, Chakraborty S (2011) Materials selection using complex proportional assessment and evaluation of mixed data methods. Mater Des 32:851–860
Chauhan A, Vaish R (2013) Hard coating material selection using multi-criteria decision making. Mater Des 44:240–245
Darji VP, Rao RV (2014) Intelligent multi criteria decision making methods for material selection in sugar industry. Procedia Mater Sci 5:2585–2594
Fayazbakhsh K, Abedian A, Manshadi BD, Khabbaz RS (2009) Introducing a novel method for materials selection in mechanical design using Z-transformation in statistics for normalization of material properties. Mater Des 30:4396–4404
Hafezalkotob A, Hafezalkotob A (2016) Extended MULTIMOORA method based on Shannon entropy weight for materials selection. J Ind Eng Int 12:1–13
Hatami-Marbini A, Tavana M, Moradi M, Kangi F (2013) A fuzzy group electre method for safety and health assessment in hazardous waste recycling facilities. Saf Sci 51:414–426
Hatefi MA (2019) Indifference threshold-based attribute ratio analysis: a method for assigning the weights to the attributes in multiple attribute decision making. Appl Soft Comput 74:643–651
İpek M, Selvi İH, Findik F, Torkul O, Cedimoğlu IH (2013) An expert system based material selection approach to manufacturing. Mater Des 47:331–340
Jahan A, Edwards KL (2013a) Weighting of dependent and target-based criteria for optimal decision-making in materials selection process: biomedical applications. Mater Des 49:1000–1008
Jahan A, Edwards KL (2013b) Multi-criteria decision analysis for supporting the selection of engineering materials in product design. Butterworth-Heinemann, Oxford
Jahan A, Ismail MY, Sapuan SM, Mustapha F (2010) Material screening and choosing methods—a review. Mater Des 31:696–705
Jahan A, Mustapha F, Ismail MY, Sapuan SM (2011) A comprehensive VIKOR method for material selection. Mater Des 32:1215–1221
Jahan A, Bahraminasab M, Edwards KL (2012) A target-based normalization technique for materials selection. Mater Des 35:647–654
Jee DH, Kang KJ (2000) A method for optimal material selection aided with decision making theory. Mater Des 21:199–206
Karande P, Chakraborty S (2012) Application of multi-objective optimization on the basis of ratio analysis (MOORA) method for materials selection. Mater Des 37:317–324
Khabbaz RS, Manshadi BD, Abedian A, Mahmudi R (2009) A simplified fuzzy logic approach for materials selection in mechanical engineering design. Mater Des 30:687–697
Kumar V, Nair S, Tiwari R, Chakraborty I (2003) Rolling element bearing design through genetic algorithms. Eng. Optim 35(6):649–659
Liu HC, You JX, Zhen L, Fan XJ (2014) A novel hybrid multiple criteria decision making model for material selection with target-based criteria. Mater Des 60:380–390
Maniya K, Bhatt MG (2010) A selection of material using a novel type of decision-making method. Preference Selection Index Method. Mater Des 31(4):1785–1789
Manshadi BD, Mahmudi H, Abedian A, Mahmudi R (2007) A novel method for materials selection in mechanical design: combination of non-linear normalization and a modified digital logic method. Mater Des 28:8–15
Mansor MR, Sapuan SM, Zainudin ES, Nuraini AA (2013) Hybrid natural and glass fibers reinforced polymer composites material selection using analytical hierarchy process for automotive brake lever design. Mater Des 51:484–492
Milani AS, Shanian A, Madoliat R, Nemes JA (2005) The effect of normalization norms in multiple attribute decision making (MADM) models: a case study in gear material selection. Struct Multidiscip Optim 29(4):312–318
Milani AS, Shanian A, Lynam C, Scarinci T (2013) An application of the analytic network process in multiple criteria material selection. Mater Des 44:622–632
Opricovic S, Tzeng GH (2007) Extended VIKOR method in comparison with out ranking methods. Eur J Oper Res 178:514–529
Ramanathan R, Ganesh L (1995) Energy resource allocation incorporating qualitative and quantitative criteria: an integrated model using goal programming and AHP. Socio Econ Plan Sci 29:197–218
Rao RV (2006) A material selection model using graph theory and matrix approach. Mater Sci Eng, A 431:248–255
Rao RV, Davim JP (2008) A decision-making framework model for material selection using a combined multiple attribute decision making method. Int J Adv Manuf Technol 35:751–760
Rao RV, Patel BK (2010) A subjective and objective integrated multiple attribute decision making method for material selection. Mater Des 31:4738–4747
Singh T, Patnaik A, Chauhan R (2016) Optimization of tribological properties of cement kiln dust-filled brake pad using grey relation analysis. Mater Des 89:1335–1342
Triantaphyllou E (2000) Multi-criteria decision making methods: a comparative study. Springer, Berlin. ISBN 978-1-4419-4838-0
Yazdani M, Payam AF (2015) A comparative study on material selection of microelectromechanical systems electrostatic actuators using Ashby, VIKOR and TOPSIS. Mater Des 65:328–333
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The author declares that he has no conflict of interest.
Ethical approval
This article does not contain any studies with human participants or animals performed by any of the authors.
Additional information
Communicated by V. Loia.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Alper Sofuoğlu, M. Development of an ITARA-based hybrid multi-criteria decision-making model for material selection. Soft Comput 23, 6715–6725 (2019). https://doi.org/10.1007/s00500-019-04056-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00500-019-04056-6