Zusammenfassung
Bei luftgekühlten, gekapselten und thermisch hoch beanspruchten Traktionsasynchronmaschinen spielen die Kühllochgeometrie sowie Strahlung und Konvektion an der Maschinenoberfläche eine essentielle Rolle bei der Kühlung der Maschine. Die Relevanz dieser Thematik wird bei verschiedenen Kühlungsarten und den dazugehörigen Blechschnitten erörtert sowie eine Berechnungsmethode vorgestellt. Ferner werden Messungen zur Verifikation präsentiert.
Abstract
The cooling duct geometry and also radiation and convection on the motor surface have a big influence on the cooling behavior of air cooled, closed and thermal highly stressed traction motors. This topic is described at different cooling concepts and laminations, further a calculation method is discussed. Measurements are presented to support these statements.
Literatur
Bäumel, T. (2005): Analyse und Abschätzung der Wirkung einer neuen Kühlungsart bei Drehstrom-Asynchron-Traktionsmotoren. Diplomarbeit, Fachhochschule Wiener Neustadt.
Boglietti, A., Cavagnino, A., Staton, D. A. (2004): TEFC induction motors thermal models: a parameter sensitivity analysis. In 39th IAS annual meeting, conference record of the 2004 IEEE industry applications conference (Bd. 4, S. 2469–2476).
Boglietti, A., Cavagnino, A., Staton, D. (2007): Determination of critical parameters in electrical machine thermal models. In 42nd IAS annual meeting, conference record of the industry applications conference (S. 73–80). New York: IEEE Press.
Boglietti, A., Cavagnino, A., Staton, D., Shanel, M., Mueller, M., Mejuto, C. (2009): Evolution and modern approaches for thermal analysis of electrical machines. IEEE Trans. Ind. Electron., 56(3), 871–882.
Buschbeck, J., Vogelsberger, M. A., Orellano, A., Schmidt, E. (2014): Aspects of electromagnetic-thermal coupled optimization of asynchronous machines for traction drives. In International conference on electrical machines, ICEM (S. 2152–2157).
Churchill, S. W., Chu, H. H. S. (1975): Correlating equations for laminar and turbulent free convection from a horizontal cylinder. Int. J. Heat Mass Transf., 18, 1049–1053.
Hak, J. (1957): Die inneren axialen Wärmewiderstände einer elektrischen Maschine. Archiv Elektrotech., XLIII(1), 58–76.
Herwig, H., Moschalski, A. (2009): Wärmeübertragung. 2. Aufl. Wiesbaden: Vieweg + Teubner.
Hwang, C-C., Wu, S., Jiang, Y. H. (2000): Novel approach to the solution of temperature distribution in the stator of an induction motor. IEEE Trans. Energy Convers., 15(4), 401–406.
Idir, K., Chang, L. (1995): The effects of ventilation and mounting holes on the magnetic field of a synchronous generator. In Canadian conference on electrical and computer engineering (Bd. 1, S. 575–577).
Neudorfer, H. (1998): Thermische Untersuchung und Berechnung eines flüssigkeitsgekühlten Traktionsmotors mit Getriebeölwellenkühlung. Dissertation, Technische Universität Wien.
Popova, L. (2010): Combined electromagnetic and thermal design platform for totally enclosed induction machines. Master’s thesis, Lappeenranta University of Technology.
Staton, D., Boglietti, A., Cavagnino, A. (2005): Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors. IEEE Trans. Energy Convers., 20(3), 620–628.
Weber, C., Neudorfer, H. (2014): Optimierung der Kühlung von Traktionsmaschinen unter Anwendung der Computational Fluid Dynamics-Methode. E&I, Elektrotech. Inf.tech., 132(1), 55–61.
Wild, S. (2015): DC-Tests DACS, Technischer Bericht. TSA013356_A. Wiener Neudorf: Traktionssysteme Austria GmbH.
Zwingel, R., Jänicke, L., Stichler, M., Kost, A. (1995): A study on the influence of axis parallel cooling ducts on the field in highly saturated induction machines using numerical field calculation. Compel, 14(4), 219–222.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wild, S., Neudorfer, H. Einfluss der Kühllochgeometrien sowie Einfluss von Strahlung und natürlicher Konvektion auf das Kühlverhalten von thermisch hoch beanspruchten Traktionsasynchronmaschinen. Elektrotech. Inftech. 133, 88–94 (2016). https://doi.org/10.1007/s00502-016-0392-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00502-016-0392-z