Zusammenfassung
Die Teilentladungsmessung (TE-Messung) gilt heute als weltweit akzeptierte Diagnosemethode für die Zustandserfassung des Isoliersystems von rotierenden elektrischen Maschinen. Im Beitrag wird neben ihren Besonderheiten auch auf die unterschiedlichen Ansätze der Messung eingegangen. Die Diskussion wird mit praktischen Beispielen und Versuchen untermauert. Die Vorteile eines digitalen Messsystems mit fortgeschrittenen Möglichkeiten zur Separierung einzelner TE-Quellen oder der Identifikation von externen Störern werden aufgezeigt. Abschließend wird die automatisierte Erkennung phasenaufgelöster Muster als Endstufe der softwarebasierten Auswertehilfe vorgestellt und erklärt.
Abstract
Partial discharge (PD) measurement is nowadays a worldwide accepted method for the condition-based assessment of stator insulation. The advantage of having a fully digital measuring system, with advanced hardware and software capabilities that allows improved insulation diagnosis by means of PD analysis, is shown. The sensitivity of the PD measurements can be strongly limited by a high noise level. State-of-the-art features based on synchronous multi-channel and multi-frequency techniques for signal separation of noise and PD defects are presented. The examples of data evaluation are described and the use of the automated PD pattern recognition system is discussed.
Literatur
IEC 60270 (2015): High-voltage test techniques – partial discharge measurements.
IEC 60034-27 (2006): Rotating electrical machines – part 27: off-line partial discharge measurements on the stator winding of rotating electrical machines.
Öttl, F., Fuhr, J., Riesen, D., Krüger, M., Binder, E., Storr, B., Pöschl, J., Keßler, T., Bittner, B. (2016): Eine Untersuchung zum Ausbreitungsverhalten von Teilentladungsimpulsen in der Hochspanungswicklung rotierender elektrischer Maschinen. In VDE-Fachtagung Hochspannungstechnik.
Kraetge, A., Hoek, S., Koch, M., Koltunowicz, W. (2013): Robust measurement, monitoring and analysis of partial discharges in transformers and other HV apparatus. IEEE Trans. Dielectr. Electr. Insul., 20(6), 1715–1723.
Badicu, L. V., Koltunowicz, W., Broniecki, U., Batlle, B. (2016): Increased operation reliability through PD monitoring of stator winding. In 13th international electrical insulation conference INSUCON, Birmingham, UK.
Binder, E., Draxler, A., Egger, H., Hummer, A., Muhr, M., Praxl, G. (1998): Experience with on-line and off-line PD measurements of generators. In Cigre general session.
Koltunowicz, W., Plath, R. (2008): Synchronous multi-channel PD measurements. IEEE Trans. Dielectr. Electr. Insul., 15(6), 2043–2051.
Badicu, L. V., Koltunowicz, W., Koch, M., Piccolo, A. (2013): Return of experience from continuous PD monitoring of rotating machines. In 18th international symposium on high voltage engineering ISH, Seoul, South Korea.
Rethmeier, K., Obralic, A., Kraetge, A., Krüger, M., Kalkner, W., Plath, R. (2009): Improved noise suppression by real-time pulse-waveform analysis of PD pulses and pulse-shaped disturbances. In 16th international symposium on high voltage engineering ISH, Cape Town, South Africa.
Koltunowicz, W., Belkov, A., Broniecki, U., Badicu, L. V., Gorgan, B., Krause, O. (2017): Automated evaluation of PRPD patterns for on-line PD monitoring of stator windings. In 20th international symposium on high voltage engineering ISH, Buenos Aires, Argentina.
Koltunowicz, W., Badicu, L. V., Broniecki, U. (2016): Increased operation reliability of HV apparatus through PD monitoring. IEEE Trans. Dielectr. Electr. Insul., 23(6), 1347–1354.
Binder, E., Draxler, A., Muhr, M., Pack, S., Schwarz, R., Egger, H., Hummer, A. (1999): Effects of air humidity and temperature to the activities of external partial discharges of stator windings. In Eleventh international symposium on high voltage engineering. Conf. publ. No. 467.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Öttl, F., Krüger, M., Koltunowicz, W. et al. Teilentladungsmessungen an rotierenden elektrischen Maschinen – Erfahrungen und Innovationen. Elektrotech. Inftech. 134, 397–406 (2017). https://doi.org/10.1007/s00502-017-0536-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00502-017-0536-9
Schlüsselwörter
- rotierende elektrische Maschinen
- Isoliersystem
- Teilentladungen
- phasenaufgelöstes Muster
- automatische Mustererkennung