Skip to main content

Advertisement

Springer Nature Link
Log in

Reconstruction of cylinder pressure for SI engine using recurrent neural network

  • Original Article
  • Published:
Neural Computing and Applications Aims and scope Submit manuscript

Abstract

Cylinder pressure based engine control systems use variables deduced from cylinder pressure as a feedback input. Monitoring of cylinder pressure is possible through various intrusive and nonintrusive sensors but cost of these sensors limits their use in the engines of on-road vehicles. In the present work, a recurrent neural network (RNN) is proposed which can reconstruct cylinder pressure of spark ignition engine. The network uses instantaneous crankshaft speed and motored pressure as inputs. Initially, parameters of two-zone model are tuned at limited number of experimental points, so that cylinder pressure predicted by model matches to that of experimental results. Further, the tuned model is used to generate large number of training data. Validation has been carried out using experimental as well as simulated pressure trace. It has been found that RNN can reconstruct cylinder pressure with reasonably good accuracy.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

Explore related subjects

Discover the latest articles, news and stories from top researchers in related subjects.

References

  1. Yoon P, Seungbum P, Myoungho S, Inyong O, Yoon KJ (2000) Closed loop control of spark advance and air-fuel ratio in SI engines using cylinder pressure. SAE Paper 2000-01-0933

  2. Sellnau MC, Matekunas FA, Battiston PA, Chang CF, Lancaster DR (2000) Cylinder pressure based engine control using pressure ratio management and low cost non intrusive cylinder pressure sensors. SAE Paper 2000-01-0932

  3. Traver ML, Richard JA, Christopher MA (1999) Neural network-based diesel engine emissions prediction using in-cylinder combustion pressure. SAE Paper 1999-01-1532

  4. Gassenfeit EH, Powell JD (1989) Algorithms for air fuel ratio estimation using internal combustion engine cylinder pressure. SAE Paper 890300

  5. Kawamura Y, Shinshi M, Sato H, Takahashi N, Iriyama M (1988) MBT control through individual cylinder pressure detection. SAE Paper 881779

  6. Gilkey JC, Powell JD (1985) Fuel-Air ratio determination from cylinder pressure time histories. J Dyn Syst Meas Control Trans ASME 107

  7. Muller R, Hart M, Krotz G, Eickhoff M, Truscott A, Noble A, Cavalloni C, Gnielka M (2000) Combustion pressure based engine management system. SAE Paper 2000-01-0928

  8. Herden W, Kusell M (1994) A new combustion pressure for advanced engine management. SAE Paper 940379

  9. Randall KW, Powell JD (1979) A cylinder pressure sensor for spark advance control and knock detection. SAE Paper 790139

  10. Arsie I, Pianese C, Rizzo G (1998) Models for the prediction of performance and emissions in a spark ignition engine—a sequentially structured approach. SAE Paper 980779

  11. Catania AE, Misul D, Mittica A, Spessa E (2001) A refined two-zone heat release model for combustion analysis in SI engines. In: Proceedings of the fifth international symposium on diagnostics and modeling of combustion in internal combustion engines

  12. Freugorson CR (1986) Internal combustion engines, applied thermo sciences. Wiley, New York

    Google Scholar 

  13. Heywood JB (1988) Internal combustion engine fundamentals. McGraw Hill International, ISBN:0-07-100499-8

  14. Saraswati S, Chand S (2009) Identification of one zone heat release parameters for SI engine. Int J Model Identifi Control 6(4):287–300

    Article  Google Scholar 

  15. Shiao Y, Moskawa JJ (1995) Cylinder pressure and combustion heat release estimation for SI engine diagnostics using nonlinear sliding observers. IEEE Trans Control Syst Technol 3(1):70–78

    Article  Google Scholar 

  16. Zeng P, Assanis ND (2004) Cylinder pressure reconstruction and its application to heat transfer analysis. SAE Paper 2004-01-0922

  17. Citron SJ, O’Higgins JE, Chen LY (1989) Cylinder by cylinder engine pressure and pressure torque waveform determination utilizing speed fluctuations. SAE Paper 890486

  18. Brown TS, Neil WS (1992) Determination of engine cylinder pressure from crankshaft speed fluctuations. SAE Paper 920463

  19. Schagerberg S, McKelvey T (2003) Instantaneous crankshaft torque measurements-modeling and validation. SAE Paper 2003-01-0713

  20. Gu F, Jacob P, Ball AD (1996) A RBF neural network model for cylinder pressure reconstruction in internal combustion engines. In: IEEE colloquium on modelling and signal processing for fault diagnosis, pp 4/1–4/11

  21. Murphy BJ, Lebold MS, Reichard K, Galie T, Byington C (2003) Diagnostic fault detection for internal combustion engines via pressure curve reconstruction. In: Proceedings of the IEEE aerospace conference, vol 7

  22. Johnsson R (2006) Cylinder pressure reconstruction based on complex radial basis function networks from vibration and speed signals. Mech Syst Signal Process 20

  23. Cybenko G (1989) Approximations by superpositions of a sigmoidal function. Math Control Signals Syst 4(2)

  24. Funahashi K (1989) On the approximate realization of continuous mappings by neural networks. Neural Netw 2

  25. Woschni G (1967) ‘A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine. SAE Technical Paper 670931

  26. Eriksson L, Andersson I (2002) An analytic model for cylinder pressure in a four stroke SI engine. SAE Paper 2002-01-0371

  27. Yusaf TF, Hoe S, Fong S, Yusoff MZ, Hussein I (2005) Modeling of transient heat flux in spark ignition engine during combustion and comparisons with experiment. Am J Appl Sci 2(10):1438–1444

    Article  Google Scholar 

  28. Rao SS (2005) Engineering optimization. New Age International Publishers, ISBN:81-224-1149-5

  29. Kiencke U, Nielsen L (1999) Automotive control systems. Springer, Berlin

    Google Scholar 

  30. Nørgaard M, Ravn O, Poulsen NL, Hansen LK (2000) Neural networks for modelling and control of dynamic systems. Springer, ISBN 1-85233-227-1

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, MNNIT, Allahabad, 21004, India

    Samir Saraswati & Satish Chand

Authors
  1. Samir Saraswati
    View author publications

    You can also search for this author inPubMed Google Scholar

  2. Satish Chand
    View author publications

    You can also search for this author inPubMed Google Scholar

Corresponding author

Correspondence to Samir Saraswati.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Saraswati, S., Chand, S. Reconstruction of cylinder pressure for SI engine using recurrent neural network. Neural Comput & Applic 19, 935–944 (2010). https://doi.org/10.1007/s00521-010-0420-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00521-010-0420-6

Keywords