Skip to main content

Advertisement

SpringerLink
Log in

Development of a compliance controller to reduce energy consumption for bipedal robots

  • Published:
Autonomous Robots Aims and scope Submit manuscript

Abstract

In this paper a strategy is proposed to combine active trajectory tracking for bipedal robots with exploiting the natural dynamics by simultaneously controlling the torque and stiffness of a compliant actuator. The goal of this research is to preserve the versatility of actively controlled humanoids, while reducing their energy consumption. The biped Lucy, powered by pleated pneumatic artificial muscles, has been built and controlled and is able to walk up to a speed of 0.15 m/s. The pressures inside the muscles are controlled by a joint trajectory tracking controller to track the desired joint trajectories calculated by a trajectory generator. However, the actuators are set to a fixed stiffness value. In this paper a compliance controller is presented to reduce the energy consumption by controlling the stiffness. A mathematical formulation has been developed to find an optimal stiffness setting depending on the desired trajectory and physical properties of the system and the proposed strategy has been validated on a pendulum structure powered by artificial muscles. This strategy has not been implemented on the real robot because the walking speed of the robot is currently too slow to benefit already from compliance control.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • Basmajian, J., & De Luca, C. (1985). Muscles alive: their function revealed by electromyography (p. 1964).

  • Bicchi, A., & Tonietti, G. (2004). Fast and soft arm tactics: dealing with the safety-performance trade-off in robot arms design and control. In IEEE robotics and automation magazine (Vol. 11, pp. 22–33).

  • Bicchi, A., Tonietti, G., Bavaro, M., & Piccigallo, M. (2003). Variable stiffness actuators for fast and safe motion control. In International symposium robotics research (pp. 100–110).

  • Caldwell, D., Medrano-Cerda, G., & Bowler, C. (1997). Investigation of bipedal robot locomotion using pneumatic muscle actuators. In IEEE international conference on robotics and automation (ICRA 1997) (pp. 799–804).

  • Collins, S. H., Ruina, A., Tedrake, R., & Wisse, M. (2005). Efficient bipedal robots based on passive-dynamic walkers. Science, 18(307), 1082–1085.

    Article  Google Scholar 

  • Daerden, F., & Lefeber., D. (2001). The concept and design of pleated pneumatic artificial muscles. International Journal of Fluid Power, 2(3), 41–50.

    Google Scholar 

  • Davis, S., Tsagarakis, N., Canderle, J., & Caldwell, D. G. (2003). Enhanced modelling and performance in braided pneumatic muscle actuators. The International Journal of Robotic Research, 22(22), 213–227.

    Article  Google Scholar 

  • Ferris, D. P., & Farley, C. T. (1997). Interaction of leg stiffness and surface stiffness during human hopping. Journal of Applied Physiology, 82(1), 15–22.

    Google Scholar 

  • Gorce, P., & Guihard, M. (1998). On dynamic control of pneumatic bipeds. Journal of Robotic Systems, 15(7), 421–433.

    Article  MATH  Google Scholar 

  • Guccione, S., Muscato, G., & Spampinato, G. (2003). A human inspired robotic leg: design, control and mechanical realization. In IEEE international conference on humanoid robots.

  • Hildebrandt, A., Sawodny, O., Neumann, R., & Hartmann, A. (2005). Cascaded control concept of a robot with two degrees of freedom driven by four artificial pneumatic muscle actuators. In American control conference (Vol. 1, pp. 680–685).

  • Honda Motor Co., Ltd. (2005). New asimo—running at 6 km/h. http://world.honda.com/HDTV/ASIMO/New-ASIMO-run-6kmh/.

  • Hurst, J. W., Chestnutt, J., & Rizzi, A. A. (2004). An actuator with physically variable stiffness for highly dynamic legged locomotion. IEEE international conference on robotics and automation (ICRA 2004) (pp. 4662–4667), New Orleans, USA.

  • Kajita, S., Kanehiro, F., Kaneko, K., Fujiwara, K., Harada, K., Yokoi, K., & Hirukawa, H. (2003). Biped walking pattern generation by using preview control of zero-moment point. In IEEE international conference on robotics and automation (ICRA 2003) (Vol. 2, pp. 1620–1626).

  • Kato, I., Mori, Y., & Masuda, T. (1972). Pneumatically powered artificial legs walking automatically under various circumstances. In Proceedings of the 4th international conference on external control of human extremities (pp. 458–470).

  • Kuo, A. D., Donelan, J. M., & Ruina, A. (2005). Energetic consequences of walking like an inverted pendulum: step-to-step transitions. Exercise and Sport Sciences Reviews, 33(2), 88–97.

    Article  Google Scholar 

  • Michel, P., Chestnutt, J., Kuffner, J., & Kanade, T. (2005). Vision-guided humanoid footstep planning for dynamic environments. In IEEE-RAS international conference on humanoid robots (pp. 13–18).

  • Schroder, J., Erol, D., Kawamura, K., & Dillman, R. (2003). Dynamic pneumatic actuator model for a model-based torque controller. In IEEE international symposium on computational intelligence in robotics and automation (CIRA 2003) (Vol. 1, pp. 342–347).

  • Schulte, H. F. (1961). The characteristics of the McKibben artificial muscle. In The application of external power in prosthetics and orthotics (pp. 94–115). Lake Arrowhead: National Academy of Sciences–National Research Council.

    Google Scholar 

  • Slotine, J. J. E., & Li, W. (1991). Applied nonlinear control. Cambridge: Prentice-Hall.

    MATH  Google Scholar 

  • Sulzer, J., Peshkin, M., & Patton, J. (2005). MARIONET: an exotendon-driven, rotary series elastic actuator for exerting joint torque. In International conference on robotics for rehabilitation (ICORR 2005) (pp. 103–108).

  • Van Ham, R., Vanderborght, B., Van Damme, M., Verrelst, B., & Lefeber, D. (2007). MACCEPA, the mechanically adjustable compliance and controllable equilibrium position actuator: design and implementation in a biped robot. Robotics and Autonomous Systems, 55(10), 761–768.

    Article  Google Scholar 

  • Vanderborght, B., Verrelst, B., Van Ham, R., & Lefeber, D. (2006a). Controlling a bipedal walking robot actuated by pleated pneumatic artificial muscles. Robotica, 24(04), 401–410.

    Article  Google Scholar 

  • Vanderborght, B., Verrelst, B., Van Ham, R., Van Damme, M., Lefeber, D., Meira, Y., Duran, B., & Beyl, P. (2006b). Exploiting natural dynamics to reduce energy consumption by controlling the compliance of soft actuators. The International Journal of Robotics Research, 25(4), 343–358.

    Article  Google Scholar 

  • Verrelst, B., Van Ham, R., Vanderborght, B., Daerden, F., & Lefeber, D. (2005). The pneumatic biped LUCY actuated with pleated pneumatic artificial muscles. Autonomous Robots, 18, 201–213.

    Article  Google Scholar 

  • Verrelst, B., Stasse, O., Yokoi, K., & Vanderborght, B. (2006a). Dynamically stepping over obstacles by the humanoid robot HRP-2. In IEEE-RAS international conference on humanoid robots (pp. 117–123).

  • Verrelst, B., Van Ham, R., Vanderborght, B., Lefeber, D., Daerden, F., & Van Damme, M. (2006b). Second generation pleated pneumatic artificial muscle and its robotic applications. Advanced Robotics, 20(7), 783–805.

    Article  Google Scholar 

  • Walker, R. (1996). Using air muscles for compliant bipedal and many-legged robotics. In IEE colloquium on information technology for climbing and walking robots (pp. 3/1–3/3).

  • Yamaguchi, J., Nishino, D., & Takanishi, A. (1998). Realization of dynamic biped walking varying joint stiffness using antagonistic driven joints. In IEEE international conference on robotics and automation (ICRA 1998) (Vol. 3, pp. 2022–2029).

  • Yoshida, E., Esteves, C., Sakaguchi, T., Laumond, J.-P., & Yokoi, K. (2006). Smooth collision avoidance: practical issues in dynamic humanoid motion. In IEEE/RSJ international conference on intelligent robots and systems (IROS 2006) (pp. 827–832).

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Vrije Universiteit Brussel, Pleinlaan 2, 1050, Brussel, Belgium

    Bram Vanderborght, Björn Verrelst, Ronald Van Ham, Michaël Van Damme, Pieter Beyl & Dirk Lefeber

  2. Robotics, Brain and Cognitive Sciences Department, Italian Institute of Technology, Via Morego 30, 16163, Genova, Italy

    Bram Vanderborght

Authors
  1. Bram Vanderborght
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Björn Verrelst
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Ronald Van Ham
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Michaël Van Damme
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Pieter Beyl
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Dirk Lefeber
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Bram Vanderborght.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Vanderborght, B., Verrelst, B., Van Ham, R. et al. Development of a compliance controller to reduce energy consumption for bipedal robots. Auton Robot 24, 419–434 (2008). https://doi.org/10.1007/s10514-008-9088-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10514-008-9088-5

Keywords

Search

Navigation