Abstract
The application of rotorcraft to autonomous load carrying and transport is a new frontier for Unmanned Aerial Vehicles (UAVs). This task requires that hovering vehicles remain stable and balanced in flight as payload mass is added to the vehicle. If payload is not loaded centered or the vehicle properly trimmed for offset loads, the robot will experience bias forces that must be rejected. In this paper, we explore the effect of dynamic load disturbances introduced by instantaneously increased payload mass and how those affect helicopters and quadrotors under Proportional-Integral-Derivative flight control. We determine stability bounds within which the changing mass-inertia parameters of the system due to the acquired object will not destabilize these aircraft with this standard flight controller. Additionally, we demonstrate experimentally the stability behavior of a helicopter undergoing a range of instantaneous step payload changes.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Notes
Rotor thrust is taken as constant, exactly canceling helicopter weight.
Note that all rotations are considered to occur around the unloaded CoG of the helicopter; offset mass effects are accounted for in the load bias torque.
The R-50 control structure does not use a pure integral term—its integral action is derived from position. The value of k i used is inferred.
Compared with helicopters of the same mass, quadrotors have significantly smaller rotors with faster blade tip speeds, making the Froude Numbers very different. Furthermore, unlike small platforms, larger quadrotors more strongly exhibit flapping, complicating the comparison.
In practice all rotorcraft exhibit flapping, however small.
References
Amidi, O., Kanade, T., & Miller, J. (1998). Vision-based autonomous helicopter research at Carnegie Mellon Robotics Institute 1991–1997. In Proc. American Helicopter Society international conference.
Bernard, M., & Kondak, K. (2009). Generic slung load transportation system using small size helicopters. In Proc. IEEE international conference on robotics and automation.
Bisgaard, M., Bendtsen, J., & la Cour-Harbo, A. (2009). Modelling of generic slung load system. Journal of Guidance, Control and Dynamics, 32(2), 573–585.
Borenstein, J. (1992). The Hoverbot—an electrically powered flying robot. Unpublished paper, University of Michigan. http://www-personal.umich.edu/~johannb/hoverbot.htm (2009).
Bouabdallah, S., Noth, A., & Siegwart, R. (2004). PID vs LQ control techniques applied to an indoor micro quadrotor. In Proc. IEEE/RSJ international conference on intelligent robots and systems.
Enns, D., & Keviczky, T. (2006). Dynamic inversion based flight control for autonomous RMAX helicopter. In Proc. American controls conference.
Hamel, T., Mahony, R., Lozano, R., & Ostrowski, J. (2002). Dynamic modelling and configuration stabilization for an X4-Flyer. In Proc. 15th triennial world congress of the International Federation of Automatic Control.
Kuntz, N., & Oh, P. (2008). Development of autonomous cargo transport for an unmanned aerial vehicle using visual servoing. In Proc. digital systems and control conference.
Leishman, J. G. (2006). Principles of helicopter aerodynamics, 2nd edn. New York: Cambridge University Press.
Mammarella, M., Campa, G., Napolitano, M., Fravolini, M., & Perhinschi, R. (2008). Machine vision/GPS integration using EKF for the UAV aerial refueling problem. IEEE Transactions on Systems, Man and Cybernetics, 38(6), 791–801.
Mettler, B. (2003). Identification, modeling and characteristics of miniature rotorcraft. Nowell: Kluwer Academics Publisher.
Michael, N., Fink, J., & Kumar, V. (2009). Cooperative manipulation and transportation with aerial robots. In Proc. robotic science and systems.
Pounds, P. E. I., & Dollar, A. M. (2010). Hovering stability of helicopters with elastic constraints. In Proc. ASME dynamic systems and control conference.
Pounds, P. E. I., Corke, P. I., & Mahony, R. E. (2010). Modelling and control of a large quadrotor robot. Control Engineering Practice, 18(7), 691–699.
Pounds, P. E. I., Bersak, D. R., & Dollar, A. M. (2011). Grasping from the air: hovering capture and load stability. In Proc. international conference on robotics and automation.
Prouty, R. (2002). Helicopter performance, stability, and control. Malabar: Krieger Publishing.
Raz, R., Rosen, A., & Ronen, T. (1988). Active aerodynamic stabilization of a helicopter/sling-load system. Journal of Aircraft, 26(9), 822–828.
Scott, D., Toal, M., & Dale, J. (2007). Vision based sensing for autonomous in-flight refueling. In Proc. of SPIE (Vol. 6561).
Acknowledgements
The authors would like to thank Joe Acosta of Build Right Fly Right Hobbies, Wallingford CT, USA, Greg Brown and Joseph Belter for their support of this work. This work was supported in part by the Office of Naval Research grant N000141010737.
Author information
Authors and Affiliations
Corresponding author
Additional information
A preliminary version of this work was presented at International Conference on Robotics and Automation 2011 (Pounds et al. 2011).
Rights and permissions
About this article
Cite this article
Pounds, P.E.I., Bersak, D.R. & Dollar, A.M. Stability of small-scale UAV helicopters and quadrotors with added payload mass under PID control. Auton Robot 33, 129–142 (2012). https://doi.org/10.1007/s10514-012-9280-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10514-012-9280-5