Abstract
The substructure of cross-sea bridge has its unique structural form, the calculation of drag force is related to working, designing, constructing and maintaining of the bridge in the marine environment. So in order to guarantee the construction and use safely, accurate and convenient calculation method of drag force is necessary. The calculation method of drag force theory is studied in this paper, with using shear stress transport model to set up eddy viscosity model, which is adopted to establish the numerical water tank and analysis the whole process of eddy generation and shedding in the wake area. Considering the features of cross-sea bridge substructure, the effect of the flow velocity, the depth of water and the section form of pier on the drag force is researched. The difference between the superposition method and integral calculation method, which are used for calculating the drag force of group pile cap composite structure, is studied. The results show that the water flow velocity is square relation with the drag force, and the depth of water is linear relation with the drag force. The drag coefficient CD of round-ended pier is 1.35, which is between the values of circular pier and rectangular pier. Due to the shield and interference with each component, the drag force calculated by integral method is less than the other one, and the lift force can be considered in the integral method.


















Similar content being viewed by others
References
Storey, C., Delatte, N.: Lessons from the collapse of the Schoharie creek bridge. In: Proceedings of the 3rd Forensic Engineering, pp. 158–467 (2003)
Cao, M., Liu, Z., Meng, J.: Statistical analysis and reflections on bridge deficiencies and disasters in the United States. Highway. 7(7), 162–167 (2009)
MacCamy, R., Fuchs, R.A.: Wave Forces on Piles: A Diffraction Theory. Beach Erosion Board Corps of Engineers, Washington, DC (1954)
Morison, J., Johnson, J., Schaaf, S.: The force exerted by surface waves on piles. J. Petrol. Technol. 2(05), 149–154 (1950)
Sarpkaya, T.: Force on a circular cylinder in viscous oscillatory flow at low Keulegan-Carpenter numbers. J. Fluid Mech. 165, 61–71 (1986)
Hrenya, C., Bolio, E., Chakrabarti, D., Sinclair, J.: Comparison of low Reynolds number k–ε turbulence models in predicting fully developed pipe flow. Chem. Eng. Sci. 50(12), 1923–1941 (1995)
ANSYS C. Release 11.0. ANSYS CFX-Solver Theory Guide. ANSYS, Canonsburg (2006)
Shih, T.-H., Liou, W.W., Shabbir, A., Yang, Z., Zhu, J.: A new k-ϵ eddy viscosity model for high reynolds number turbulent flows. Comput. Fluids 24(3), 227–238 (1995)
Ohmart, R.D., Gratz, R.: Drag coefficients from hurricane wave data. Civil Eng. Oceans IV 1, 260–272 (1979)
Bishop, R., Hassan, A.: The lift and drag forces on a circular cylinder oscillating in a flowing fluid. Proc. R. Soc. Lond. A 277, 51–75 (1964)
Liu, S.-X., Li, Y.-C., Li, G.-W.: Wave current forces on the pile group of base foundation for the East Sea Bridge, China. J. Hydrodyn. B 19(6), 661–670 (2007)
Yang, J., Lei, F., Li, K.: Analysis of vibration of underwater bridge pier structure. World Bridges 3, 43–45 (2009)
Wang, S.-Q., Liang, B.-C.: Wave Mechanics for Ocean Engineering. Ocean University of China Publishing House, Qingdao (2013)
Spalart, P.R., Allmaras, S.R.: A one equation turbulence model for aerodynamic flows. AIAA J. (1992). https://doi.org/10.2514/6.1992-439
Gopalan, H., Heinz, S., Stöllinger, M.K.: A unified RANS–LES model: computational development, accuracy and cost. J. Comput. Phys. 249, 249–274 (2013)
Abe, K.-I.: An advanced switching parameter for a hybrid LES/RANS model considering the characteristics of near-wall turbulent length scales. Theoret. Comput. Fluid Dyn. 28(5), 499–519 (2014)
Breuer, M., Jaffrézic, B., Arora, K.: Hybrid LES–RANS technique based on a one-equation near-wall model. Theoret. Comput. Fluid Dyn. 22(3–4), 157–187 (2008)
Langhe, C.D., Merci, B., Dick, E.: Hybrid RANS/LES modelling with an approximate renormalization group. I: Model development. J. Turbul. 6, N13 (2005)
Fadai-Ghotbi, A., Friess, C., Manceau, R., Borée, J.: A seamless hybrid RANS-LES model based on transport equations for the subgrid stresses and elliptic blending. Phys. Fluids 22(5), 055104 (2010)
Fasel, H.F., Von Terzi, D.A., Sandberg, R.D.: A methodology for simulating compressible turbulent flows. J. Appl. Mech. 73(3), 405–412 (2006)
Girimaji, S.S., Srinivasan, R., Jeong, E. (eds.): PANS turbulence model for seamless transition between RANS and LES: fixed-point analysis and preliminary results. In: ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference. American Society of Mechanical Engineers, New York (2003)
Hamba, F.: A hybrid RANS/LES simulation of turbulent channel flow. Theoret. Comput. Fluid Dyn. 16(5), 387–403 (2003)
Han, X., Krajnović, S.: An efficient very large eddy simulation model for simulation of turbulent flow. Int. J. Numer. Meth. Fluids 71(11), 1341–1360 (2013)
Hedges, L., Travin, A., Spalart, P.: Detached-eddy simulations over a simplified landing gear. J. Fluids Eng. 124(2), 413–423 (2002)
Menter, F., Egorov, Y.: A scale-adaptive simulation model using two-equation models. AIAA paper, 2005-1095 (2005)
Shur, M., Spalart, P., Strelets, M., Travin, A.: Detached-eddy simulation of an airfoil at high angle of attack. Eng. Turbul. Model. Exp. 4, 669–678 (1999)
Tucker, P.G., Davidson, L.: Zonal k–l based large eddy simulations. Comput. Fluids 33(2), 267–287 (2004)
Davidson, L., Peng, S.-H.: Hybrid LES-RANS modelling: a one-equation SGS model combined with a k-ω model for predicting recirculating flows. Int. J. Numer. Methods Fluids 43(9), 1003–1018 (2003)
Menter, F.R.: Two-equation eddy-viscosity turbulence models for engineering applications. AIAA J. 32(8), 1598–1605 (1994)
Sokolichin, A., Eigenberger, G.: Applicability of the standard k–ε turbulence model to the dynamic simulation of bubble columns: Part I. Detailed numerical simulations. Chem. Eng. Sci. 54(13), 2273–2284 (1999)
Tiwari, A.K., Ghosh, P., Sarkar, J., Dahiya, H., Parekh, J.: Numerical investigation of heat transfer and fluid flow in plate heat exchanger using nanofluids. Int. J. Therm. Sci. 85, 93–103 (2014)
Marwaan, A.-K., Mossad, R.: Optimization of the heat exchanger in a flat plate indirect heating integrated collector storage solar water heating system. Renew. Energy 57, 413–421 (2013)
Chen, B., Ho, K., Abakr, Y.A., Chan, A.: Fluid dynamics and heat transfer investigations of swirling decaying flow in an annular pipe Part 1: Review, problem description, verification and validation. Int. J. Heat Mass Transf. 97, 1029–1043 (2016)
Anderson, M. (ed.): Fluent CFD versus Sovran and Klomp diffuser data benchmark study. In: 46th AIAA Aerospace Sciences Meeting and Exhibit (2008)
Allen, J.B., Riveros, G.: Hydrodynamic characterization of the Polyodon spathula Rostrum using CFD. J. Appl. Math. (2013). https://doi.org/10.1155/2013/346173
Wang, Y.-H., Zou, Y.-S., Xu, L.-Q., Luo, Z.: Analysis of water flow pressure on bridge piers considering the impact effect. Math. Probl. Eng. 2015, 1–8 (2015)
Acknowledgements
The authors would like to express their sincere gratitude to the supports from the National Nature Science Foundation of China under Grant No. 51378437.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Deng, S., Shen, H., Liu, L. et al. Numerical investigation of the drag force for cross-sea bridge based on the two-way fluid-structure interaction. Cluster Comput 22 (Suppl 2), 5041–5053 (2019). https://doi.org/10.1007/s10586-018-2473-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10586-018-2473-8