Abstract
This paper focuses on designing an approach for the conformance test of AUTOSAR network management (NM). After analyzing the state machine of the NM module, a new approach based on the virtual network simulation is proposed according to the characters of the NM module. In this approach, a network simulation environment is created for DUT, in which some virtual nodes run according to the NM protocol, and the transitions among different NM modes are driven by the test scripts. During the test, the software monitor records all the data to check the conformation of the DUT. After all the research above, a certain type body controller module from an OEM is selected to verify the validity of the new approach. The result of the test showed that this approach is effective for the conformance test of AUTOSAR NM.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
AutoSAR Partners. AUTOSAR_SWS_LIN Network Management V2.0. http://www.AutoSAR.org. 2011-10.
R. Svenningsson, R. Johansson, T. Arts, et al., Formal Methods Based Acceptance Testing for AUTOSAR Exchangeability, SAE International Journal of Passenger Cars—Electronic and Electrical Systems, Vol. 5, No. 1, pp. 209–213, 2012.
R. Belschner, S. Herz and D. I. J. Rein, AUTOSAR methodology in practice, ATZextra Worldwide, Vol. 18, No. 9, pp. 104–106, 2013.
AutoSAR Partners. AUTOSAR_SWS_CAN Network Management V3.5. http://www.AutoSAR.org. 2013-10.
A. Y. Cheng, R. G. Wang, Y. F. Li, et al., Research and implementation of AUTOSAR NM mechanism in FlexRay network on electronic vehicle motor drive control system, Sensors & Transducers, Vol. 25, pp. 169–174, 2013.
AutoSAR Partners. AUTOSAR BSW&RTE Conformance Test Specification Part1-4. http://www.AutoSAR.org. 2013-10.
T. W. Awan, A. M. Abed, I. Kim et al, CAN based conformance testing using TTCN-3, Vol. 3, No. 6, pp. 417–423, 2014.
Wenzhi Tan, Jishun Kuang, Dezhi Wang and Renfa Li, Research of the conformance testing of AUTOSAR, Computer Engineering, Vol. 38, No. 4, pp. 43–45, 2012.
Dezhi Wang, Jishun Kuang and Wenzhi Tan. Confotmance testing for the car lights system based on AUTOSAR standard. In 2011 IEEE 3rd International Conference on Communication software and Networks. Location unknown: IEEE, pages 27–29, 2011.
Y. Zhou, X. X. Zhang and L. R. Chen, Implementation method of adapter in AUTOSAR conformance test, Computer Engineering, Vol. 40, No. 1, pp. 291–294, 2014.
H. Rong, X. Wang and C. Wang, Implementation of the direct network management function based on OSEK standard. Electronic Measurement Technology, 2017.
Sangrok Han, Hyogon Kim, On AUTOSAR TCP/IP performance in in-vehicle network environments. IEEE Communications Magazine, Vol. 54, No. 12, pp. 168–173, 2016-12.
Yu Zhang Jianjun, Zhang Benhong Ping and Wang Yufei, Improved method of AUTOSAR in-vehicle network management[J], Journal of Electronic Measurement and Instrument, Vol. 27, No. 11, pp. 1093–1098, 2013.
Hu Qi, Li Hong, Wu Zhao Mingde, Yao Dongwei Feng and Fang Zheng, Design and implementation of ECU software for electronic gasoline engine based on AUTOSAR, Journal of Zhejiang University (Engineering Science), Vol. 25, No. 6, pp. 1119–1123, 2011.
H. Cao, Z. Yao, Q. H. Deng et al. The design of violation vehicle management system based on MAS cooperation. In IEEE International Conference on Computer Science and Automation Engineering. IEEE, pages 457–462, 2011.
K. Hansch, A. Pelzer, P. Komarnicki et al, An ISO/IEC 15118 conformance testing system architecture. In Pes General Meeting|Conference & Exposition. IEEE, pages 1–5, 2014.
Y. H. Lee, H. K. Jin and J. W. Jeon, Applying AUTOSAR network management in OSEK/VDX for compatibility of AUTOSAR and OSEK/VDX[M]. In Proceedings of the FISITA 2012 World Automotive Congress. Berlin, Heidelberg: Springer, 2013.
J. Zhang, P. Yu, B. Zhang et al, Improved method of AUTOSAR in-vehicle network management. Journal of Electronic Measurement & Instrument, 2013.
J. R. Pimentel, An incremental approach to task and message scheduling for AUTOSAR based distributed automotive applications. In International Workshop on Software Engineering for Automotive Systems, 2007. ICSE Workshops Seas. IEEE, page 1-1, 2007.
W. C. Lu, P. Y. Lu, C. Long, et al., The design and simulation of vehicle electronic control network based on CAN/LIN bus, Advanced Materials Research, Vol. 403–408, pp. 3044–3048, 2012.
Mariusz A. Fecko, Timing and controllability issues in conformance testing of communications protocols. Ph.D thesis, University of Delaware, 1999.
Julien Provost, Jean-Marc Roussel, Jean-Marc Faure, Generation of single input change test sequences for conformance test of programmable logic controllers. IEEE Transactions on Industrial Informatics, Vol. 10, No. (3), pp. 1696–1704, 2014-08.
M. Krichen and S. Tripakis, Black-box conformance testing for real-time systems, Lecture Notes in Computer Science, Vol. 34, No. 3, pp. 109–126, 2004.
L. Cristaldi, A. Ferrero and V. Piuri, Programmable instruments, virtual instruments, and distributed measurement systems: what is really useful, innovative and technically sound?, IEEE Instrumentation & Measurement Magazine, Vol. 2, No. 3, pp. 20–27, 1999.
Y. Q. Li, Y. Li and Z. X. Wang, Design and realization of passenger vehicle body CAN/LIN network based on AUTOSAR, Applied Mechanics & Materials, Vol. 40–41, pp. 3–7, 2011.
Xiwen Guo. Comminucation and application of the ECU referenced to AUTOSAR standards. MA thesis, Zhe Jiang University, 2008.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Luo, F., Xie, Y. Conformance Test of AUTOSAR Network Management. Int J Wireless Inf Networks 25, 279–288 (2018). https://doi.org/10.1007/s10776-018-0385-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10776-018-0385-4