Skip to main content
Log in

Design and Control of a Hyper-Redundant Manipulator for Mobile Manipulating Unmanned Aerial Vehicles

  • Published:
Journal of Intelligent & Robotic Systems Aims and scope Submit manuscript

Abstract

Manipulating objects using arms mounted to unmanned aerial vehicles (UAVs) is attractive because UAVs may access many locations that are otherwise inaccessible to other mobile manipulation platforms such as ground vehicles. Despite recent work, several major challenges remain to be overcome before it will be practical to manipulate objects from UAVs. Among these challenges are: (a) The constantly moving UAV platform and compliance of manipulator arms make it difficult to position the UAV and end-effector relative to an object of interest precisely enough for manipulation, and (b) The motions of the manipulator impact the stability of the host UAV, further complicating positioning. Solving these challenges will bring UAVs one step closer to being able to perform meaningful tasks such as infrastructure repair, disaster response, casualty extraction, and cargo resupply. Toward solutions to these challenges, this paper describes a hyper-redundant manipulator, manipulator control approaches and system design considerations to position the manipulator relative to objects of interest in such a way that impacts on platform stability are minimized.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Ambrose, R.O., Aldridge, H., Askew, R.S., Burridge, R.R., Bluethmann, W., Diftler, M., Lovchik, C., Magruder, D., Rehnmark, F.: Robonaut: Nasa’s space humanoid. IEEE Intell. Syst. App. 15(4), 57–63 (2000)

    Article  Google Scholar 

  2. Bourquardez, O., Mahony, R., Guenard, N., Chaumette, F., Hamel, T., Eck, L.: Image-based visual servo control of the translation kinematics of a quadrotor aerial vehicle. IEEE Trans. Robot. 25(3), 743–749 (2009)

    Article  Google Scholar 

  3. Chaumette, F., Rives, P., Espiau, B.: Positioning of a robot with respect to an object, tracking it and estimating its velocity by visual servoing. In: Proceedings on IEEE International Conference on Robotics and Automation, 1991, pp. 2248–2253. IEEE (1991)

  4. Corke, P.I.: A robotics toolbox for matlab. IEEE Robot. Autom. Mag. 3(1), 24–32 (1996)

    Article  Google Scholar 

  5. Danko, T.W., Oh, P.Y.: A hyper-redundant manipulator for mobile manipulating unmanned aerial vehicles. In: 2013 International Conference on Unmanned Aircraft Systems (ICUAS), pp. 974–981. IEEE (2013)

  6. Garage, W.: Personal robot 2 (pr2). Online: http://www.willowgarage.com. Cited at p. 14 (2013)

  7. Hein, B.R., Chopra, I.: Hover performance of a micro air vehicle: rotors at low reynolds number. J. Am. Helicopter Soc. 52(3), 254–262 (2007)

    Article  Google Scholar 

  8. Hogan, N.: Impedance control: an approach to manipulation. In: American Control Conference, 1984, pp. 304–313. IEEE (1984)

  9. Jimenez-Cano, A., Martin, J., Heredia, G., Ollero, A., Cano, R.: Control of an aerial robot with multi-link arm for assembly tasks. In: IEEE Int. Conf. Robotics and Automation (ICRA). Karlsruhe, Germany (2013)

  10. Korpela, C.M., Danko, T.W., Oh, P.Y.: Mm-uav: mobile manipulating unmanned aerial vehicle. J. Intell. Robot. Syst. 65(1–4), 93–101 (2012)

    Article  Google Scholar 

  11. Kuntz, N., Oh, P.Y.: Towards autonomous cargo deployment and retrieval by an unmanned aerial vehicle using visual servoing. In: Proceedings of 2008 ASME Dynamic Systems and Controls Conference (2008)

  12. Lippiello, V., Ruggiero, F.: Cartesian impedance control of a uav with a robotic arm. In: 10th International IFAC Symposium on Robot Control (2012)

  13. Marques, L., Dinis, J., Coimbra, A.P., Crisóstomo, M.M., Ferreira, J.P.: 3D hyper-redundant robot. In: 11th Spanish Portuguese Conference on Electrical Engineering, Zaragoza, Spain, July 2009

  14. Mellinger, D., Lindsey, Q., Shomin, M., Kumar, V.: Design, modeling, estimation and control for aerial grasping and manipulation. In: 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 2668–2673. IEEE (2011)

  15. Mellinger, D., Shomin, M., Michael, N., Kumar, V.: Cooperative grasping and transport using multiple quadrotors. In: Distributed Autonomous Robotic Systems, pp. 545–558. Springer (2013)

  16. Orsag, M., Korpela, C., Oh, P.: Modeling and control of mm-uav: mobile manipulating unmanned aerial vehicle. J. Intell. Robot. Syst. 69(1–4), 227–240 (2013)

    Article  Google Scholar 

  17. Pines, D.J., Bohorquez, F.: Challenges facing future micro-air-vehicle development. J. Aircr. 43(2), 290–305 (2006)

    Article  Google Scholar 

  18. Pounds, P.E., Bersak, D.R., Dollar, A.M.: Grasping from the air: hovering capture and load stability. In: 2011 IEEE International Conference on Robotics and Automation (ICRA), pp. 2491–2498. IEEE (2011)

  19. Pounds, P.E., Dollar, A.: Hovering stability of helicopters with elastic constraints. In: ASME 2010 Dynamic Systems and Control Conference (DSCC2010), vol. 2, pp. 781–788. American Society of Mechanical Engineers (2010)

  20. Srinivasa, S.S., Ferguson, D., Helfrich, C.J., Berenson, D., Collet, A., Diankov, R., Gallagher, G., Hollinger, G., Kuffner, J., Weghe, M.V.: Herb: a home exploring robotic butler. Auton. Robot. 28(1), 5–20 (2010)

    Article  Google Scholar 

  21. Tsai, L.W., Morgan, A.P.: Solving the Kinematics of the Most General Six-and Five-Degree-of-Freedom Manipulators by Continuation Methods. ASME (1985)

  22. Yoshikawa, T.: Manipulability of robotic mechanisms. Int. J. Robot. Res. 4(2), 3–9 (1985)

    Article  MathSciNet  Google Scholar 

  23. Zhao, J., Cui, X., Zhu, Y., Tang, S.: Ubot: a new reconfigurable modular robotic system with multimode locomotion ability. Ind. Robot. 39(2), 178–190 (2012)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Todd W. Danko.

Additional information

This project was supported in part by a US NSF CRI II-New, Award # CNS-1205490.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Danko, T.W., Oh, P.Y. Design and Control of a Hyper-Redundant Manipulator for Mobile Manipulating Unmanned Aerial Vehicles. J Intell Robot Syst 73, 709–723 (2014). https://doi.org/10.1007/s10846-013-9935-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10846-013-9935-2

Keywords

Navigation