Abstract
Along with the continuous development of science and technology information technology, especially the rapid development of network technology, people have generally entered the information society, and this view refers to what is generally concerned. Global resource sharing will be an effective way to optimize information services and improve resource utilization. This paper analyzes the functions and requirements of the industrial design professional resource information network sharing system; according to the functions and requirements combined with the current advanced technology, design a solution that is better used in general, according to functional requirements and solutions. Use, analyze the system modeling tools from different perspectives, and then further subdivide the structured program. The design of the system database combines the requirements of structured programs and designs a well-structured database solution according to the main functional requirements of the device resource information network sharing system. The experimental results show that the designed platform works well, the basic content of the board and the output of the platform are detailed, and the service functions are more comprehensive.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Data availability
All data generated or analysed during this study are included in the manuscript.
Code availability
Not applicable.
Change history
25 March 2024
This article has been retracted. Please see the Retraction Notice for more detail: https://doi.org/10.1007/s10878-024-01128-8
References
Bai C, Wang RR, Liang JX (2014) Operation mode of resource sharing based on remote control of network system. Appl Mech Mater 556–562:3891–3895. https://doi.org/10.4028/www.scientific.net/AMM.556-562.3891
Bishop AP, Bruce B (2010) Community informatics: integrating action, research and learning. Bull Am Soc Inf Sci Technol 31(6):6–10. https://doi.org/10.1002/bult.2005.1720310603
Cai J, Li X, Chen X (2016) Optimization of aeroengine shop visit decisions based on remaining useful life and stochastic repair time. Math Probl Eng 2016(5):1–11. https://doi.org/10.1155/2016/5648360
Cochran DS, Jafri MU, Chu AK et al (2016) Incorporating design improvement with effective evaluation using the manufacturing system design decomposition (MSDD). J Ind Inf Integr 2:65–74. https://doi.org/10.1016/j.jii.2016.04.005
Fu K, Murphy J, Yang M et al (2015) Design-by-analogy: experimental evaluation of a functional analogy search methodology for concept generation improvement. Res Eng Des 26(1):77–95. https://doi.org/10.1007/s00163-014-0186-4
Gonzalez-Badillo G, Medellin-Castillo H, Lim T et al (2014) The development of a physics and constraint-based haptic virtual assembly system. Assem Autom 34(1):41–55. https://doi.org/10.1108/aa-03-2013-023
Hashimoto F, Chaudhari RG, Melkote SN (2016) Characteristics and performance of surfaces created by various finishing methods (invited paper). Procedia Cirp 45:1–6. https://doi.org/10.1016/j.procir.2016.02.052
Huang R, Zhang S, Bai X et al (2014) Multi-level structuralized model-based definition model based on machining features for manufacturing reuse of mechanical parts. Int J Adv Manuf Technol 75(5–8):1035–1048. https://doi.org/10.1007/s00170-014-6183-y
Iyer RR, Wu A, Macmillan A et al (2017) Use of computer-assisted design and manufacturing to localize dural venous sinuses during reconstructive surgery for craniosynostosis. Childs NervSyst 34(1):1–6. https://doi.org/10.1007/s00381-017-3601-0
Kim KM, Lee KP (2016) Collaborative product design processes of industrial design and engineering design in consumer product companies. Des Stud 46:226–260. https://doi.org/10.1016/j.destud.2016.06.003
Lin XG, Xu Y (2012) The comparison of portal frame design by penalty function optimization and traditional method. Adv Mater Res 452–453:348–353. https://doi.org/10.4028/www.scientific.net/AMR.452-453.348
Liu SF, Li WM (2013) The key technology research of heterogeneous product data exchange and sharing in collaborative design and manufacturing system. Adv Mater Res 694–697:2432–2437. https://doi.org/10.4028/www.scientific.net/AMR.694-697.2432
Minkowycz WJ, Sparrow EM, Murthy JY (2015) Handbook of numerical heat transfer, second edition. Dry Technol 7(4):125–126. https://doi.org/10.1002/9780470172599.ch10
Miyazaki T, Suematsu N, Baba D et al (2016) Demand-addressable sensor network: toward large-scale active information acquisition. IEEE Sen J 16(20):7421–7432. https://doi.org/10.1109/JSEN.2016.2575846
Vargas A, Boza A, Patel S et al (2016) Inter-enterprise architecture as a tool to empower decision-making in hierarchical collaborative production planning. Data Knowl Eng 105:5–22. https://doi.org/10.1016/j.datak.2015.10.002
Viswanathan K (2012) Elegant concept for reduction of jet noise from turbofan engines. J Aircr 43(3):616–626. https://doi.org/10.2514/1.11432
Vlter M, Schmid A, Wolff E (2013) Professional ASP.NET 2.0 server control and component development. Int J Adapt Control Signal Process 29(7):805–834. https://doi.org/10.1002/acs.2504
Wallace A (2016) The work of art in the age of mechanical reproduction. South Rev 52(2):80–81. https://doi.org/10.1007/978-1-137-08886-4_7
Wang C, Ning R, Liu J et al (2012) dynamic simulation and disturbance torque analyzing of motional cable harness based on Kirchhoff rod model. Chin J Mech Eng 25(2):346–354. https://doi.org/10.3901/CJME.2012.02.346
Wang T, Zha J, Jia Q et al (2016) Application of low-melting alloy in the fixture for machining aeronautical thin-walled component. Int J Adv Manuf Technol 87(9–12):2797–2807. https://doi.org/10.1007/s00170-016-8654-9
Wen Z, Zuo H, Pecht MG (2011) Electrostatic monitoring of gas path debris for aero-engines. IEEE Trans Reliab 60(1):33–40. https://doi.org/10.1109/TR.2011.2104830
Xiao B (2012) Analysis of the freemasons in the light of “the complete works of Marx and Engels.” World Rev Polit Econ 3(1):83–99. https://doi.org/10.2307/41931961
Yang S, Feng DS (2014) Research on the application of IT in electrical automation technology major course teaching. Appl Mech Mater 672–674:2261–2264. https://doi.org/10.4028/www.scientific.net/amm.672-674.2261
Yau T, Tang VYF, Yao TJ et al (2014) Development of Hong Kong liver cancer staging system with treatment stratification for patients with hepatocellular carcinoma. Gastroenterology 146(7):1691–1700. https://doi.org/10.1053/j.gastro.2014.02.032
Funding
The authors acknowledge the Institute of Chinese Liquor History, Social Science Key Research Base of Sichuan Province (Grant: ZGJS2022-15), Social development and social risk control research center, Sichuan Provincial Key Research Base of Philosophy and Social Sciences(Grant: SR22A10), China Panxi health industry research center, Sichuan Provincial Key Research Base of Philosophy and Social Sciences(Grant: PXKY-YB-202101), Key research base of Humanities and Social Sciences in Sichuan Universities “Rural Early Childhood Education Research Center” (Grant No. NYJ20190605), Sichuan Grassroots Public Cultural Service Research Center, Sichuan Provincial Department of Education Humanities and Social Science Key research base (Grant: JY2020B02), Talent Introduction Project of Xihua University (Grant No. Z202110).
Author information
Authors and Affiliations
Contributions
NQ and XZ contributed to the design and methodology of this study, the assessment of the outcomes and the writing of the manuscript.
Corresponding author
Ethics declarations
Conflict of interest
There is no conflict of interest among the authors.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
This article has been retracted. Please see the retraction notice for more detail:https://doi.org/10.1007/s10878-024-01128-8
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Qi, N., Zhang, X. RETRACTED ARTICLE: Optimization design and implementation of shared information management system for industrial design network platform. J Comb Optim 45, 29 (2023). https://doi.org/10.1007/s10878-022-00956-w
Accepted:
Published:
DOI: https://doi.org/10.1007/s10878-022-00956-w