Skip to main content
Log in

Active sound profiling of narrowband signals for improving sound quality in an enclosed space

  • Published:
Multimedia Tools and Applications Aims and scope Submit manuscript

Abstract

In this paper, an active sound profiling (ASP) system based on the command-FxLMS algorithm was implemented in an enclosed space for improving sound quality. This ASP system was designed to track a pre-defined target signal against rpm in order to actively reduce and enhance the disturbance signal from a rotating machine. The control system consists of an error microphone at a control point, a midrange loudspeaker and a subwoofer in the enclosed space with a digital signal processing board. The real-time control experiment with the ASP system was carried out in the enclosed space to track the target signal of 9 orders from C2 to C6 which was defined because the disturbance signal before control had poor sound quality. Sound pressure levels (SPLs) of the 9 orders were attenuated or enhanced over rpm. The root mean square values of the deviations between the SPLs after control and the target SPLs of the orders became about 1.62–5.23 dB, which were dramatically reduced compared to the deviations before control. This result showed that the ASP algorithm in the control experiment improved sound quality greatly.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Carme C, Mellin V, Kronast M (2006) Sound profiling for active noise control. Proceedings of the 2006 International symposium on active control of sound and vibration

  2. Cerrato G (2009) Automotive sound quality - powertrain, Road and Wind Noise, Sound & Vibration, April, pp. 16–24

  3. Couche J, Fuller C (1999) Active control of power train and noise in the cabin of a sport utility vehicle with advanced speakers. Proceedings of the 1999 International symposium on active control of sound and vibration, pp. 2–4

  4. Das DO, Panda G, Nayak DK (2006) Development of frequency domain block filtered-s (FBFSLMS) algorithm for active noise control system. IEEE International Conference on Acoustics, Speech and Signal Processing, France, pp. 289–292

  5. De Oliveira LP, Stallaert B, Janssens K, Van der Auweraer H, Sas P, Desmet W (2010) NEX-LMS: a novel Adaptive control scheme for harmonic sound quality control. Mech Syst Signal Process 24(6):1727–1738

    Article  Google Scholar 

  6. Duan J, Li M, Lim TC, Lee M-R, Cheng M-T, Vanhaaften AT (2015) A computationally efficient multichannel active road noise control system. ASME Journal of Dynamic Systems, Measurement, and Control 137:01103

    Google Scholar 

  7. Elliott SJ (2001) Signal processing for active control. Academic Press

  8. Elliott SJ, Nelson PA (1993) Active noise control, signal processing magazine. IEEE 10(4):12–35

    Google Scholar 

  9. Elliott SJ, Stothers IM, Nelson PA, McDonald AM, Quinn DC, Saunders T (1988) The active control of engine noise inside cars. INTER-NOISE and NOISE-CON Congress and Conference Proceedings 1998(3):987–990

    Google Scholar 

  10. Kim J, Ryu S, Jang J, Lee M, Kim S, Park DC, Lee Y-S (2015) Implementation of active sound design system for improvement of car engine sound quality, Proceedings of the Korea Society for noise and vibration Engineering annual spring Conference, pp. 280–281

  11. Kuo SM, Ji MJ (1993) Development and experiment of narrowband active noise equalizer. Noise Control Engineering Journal 41(3):281–288

    Article  Google Scholar 

  12. Kuo SM, Morgan KR (1996) Active noise control, algorithms and DSP implements. John Wiley & Sons, New York

    Google Scholar 

  13. Rees LE, Elliott SJ (2006) Adaptive algorithms for active sound-profiling. IEEE Trans Audio Speech Lang Processing 14(2):711–719

    Article  Google Scholar 

  14. Ryu S, Kim J, Lee Y-S (2015) Active sound control approach using virtual microphones for formation of quiet zones at a chair. Transactions of the Korean Society for Noise and Vibration Engineering 25(9):628–636

    Article  Google Scholar 

  15. Ryu S, Kim J, Park YJ, Choi Y, Kim S, Park DC, Lee Y-S (2015) Development of a practical active sound quality control system for improved sound quality in a passenger car. Proceedings of the Korea Society for noise and vibration Engineering annual spring Conference, pp. 280–281

  16. Schirmacher R (2002) Active design of automotive engine sound, Audio Engineering Society convention 112. Society, Audio Engineering

    Google Scholar 

Download references

Acknowledgements

This work was supported by the Incheon National University Research Grant in 2014.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Young-Sup Lee.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ryu, S., Kim, J. & Lee, YS. Active sound profiling of narrowband signals for improving sound quality in an enclosed space. Multimed Tools Appl 76, 24595–24607 (2017). https://doi.org/10.1007/s11042-017-4648-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11042-017-4648-3

Keywords

Navigation