Skip to main content

Advertisement

Log in

Throughput, capacity and latency analysis of P-NOMA RRM schemes in 5G URLLC

  • 1172: 5G Multimedia communications for Vehicular, Industry and Entertainment Applications
  • Published:
Multimedia Tools and Applications Aims and scope Submit manuscript

Abstract

5G is expected to cover a wide range of potential use cases due to its flexible and configurable physical layer waveform. One of the use cases proposed is the application of 5G on Ultra-Reliable Low Latency Communication (URLLC), which are characterized by very challenging reliability/availability and latency requirements. In addition, multimedia applications are being consolidated as a relevant aspect of current industrial environments. In order to meet those strict requirements, Radio Resource Management (RRM) becomes a critical phase of any wireless communication system. This work proposes the use of power domain Non-Orthogonal Multiple Access (P-NOMA) techniques in 5G RRM for factory automation environments. The research presented in this paper includes the design and evaluation of different RRM algorithms based on P-NOMA and on traditional Orthogonal Multiple Access (OMA) techniques, such as Time/Frequency Division Multiplexing Access (T/FDMA). Those algorithms are comprehensively explained and oriented to optimize the resource allocation based on different metrics (i.e., capacity, number of users, or cycle time). Moreover, extensive results are presented, where the performance of NOMA and OMA techniques is compared in terms of different metrics under the influence of several parameters, such as payload, bandwidth, or the number of users. Results indicate that although both NOMA and OMA provide positive aspects, eventually NOMA-based RRM algorithms are the solutions that enhance considerably the spectral efficiency.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. 3GPP TR 38.802 V14.2.0 (2017) Study on new radio (NR) access technology physical layer aspects, 3rd generation partnership project. Tech Rep.

  2. 3GPP TS 38.201 V15.0.0 (2018) NR; physical layer; general description, 3rd generation partnership project. Tech Spec.

  3. 3GPP TS 38.214 v15.3.0 (2018) NR; physical layer procedures for data (Release15), 3rd generation partnership project. Tech Rep.

  4. Aktas I et al (2017) LTE evolution—latency reduction and reliability enhancements for wireless industrial automation. 28th annual international symposium on personal, indoor, and Mobile radio communications (PIMRC), IEEE, Montreal, pp. 1-7. https://doi.org/10.1109/PIMRC.2017.8292603

  5. Al-Turjman F, Alturjman S (2020) 5G/IoT-enabled UAVs for multimedia delivery in industry-oriented applications. Multimed Tools Appl 79:8627–8648. https://doi.org/10.1007/s11042-018-6288-7

    Article  Google Scholar 

  6. Anwar M, Xia Y, Zhan Y (2016) TDMA-based IEEE 802.15.4 for low-latency deterministic control applications. IEEE Transactions on Industrial Informatics 12(1):338–347. https://doi.org/10.1109/TII.2015.2508719

    Article  Google Scholar 

  7. Ao W, Cui Y, Yao Q, Li X (2019) Design and implementation of distributed video equipment monitoring and management system. IEEE international conference on industrial internet (ICII), IEEE, Orlando, pp. 423-427. https://doi.org/10.1109/ICII.2019.00078

  8. Bergmans P, Cover T (1974) Cooperative broadcasting. IEEE Trans Inf Theory 20(3):317–324. https://doi.org/10.1109/TIT.1974.1055232

    Article  MathSciNet  MATH  Google Scholar 

  9. Blanco-Novoa O, Fernández-Caramés TM, Fraga-Lamas P, Vilar-Montesinos MA (2018) A practical evaluation of commercial industrial augmented reality Systems in an Industry 4.0 shipyard. IEEE Access 6:8201–8218. https://doi.org/10.1109/ACCESS.2018.2802699

    Article  Google Scholar 

  10. Coll JF, Chilo J, Slimane B (2012) Radio-frequency electromagnetic characterization in factory infrastructures. IEEE Trans Electromagn Compat 54(3):708–711. https://doi.org/10.1109/TEMC.2012.2197753

    Article  Google Scholar 

  11. Cover T (1972) Broadcast channels. IEEE Trans Inf Theory 18(1):2–14. https://doi.org/10.1109/TIT.1972.1054727

    Article  MathSciNet  MATH  Google Scholar 

  12. Croonenbroeck R, Underberg L, Wulf A, Kays R (2017) Measurements for the development of an enhanced model for wireless channels in industrial environments. 13th international conference on wireless and Mobile computing, networking and communications (WiMob), IEEE, Rome, pp. 1-8. https://doi.org/10.1109/WiMOB.2017.8115764

  13. Drath R, Horch A (2014) Industrie 4.0: hit or hype? [industry forum]. IEEE Ind Electron Mag 8(2):56–58. https://doi.org/10.1109/MIE.2014.2312079

    Article  Google Scholar 

  14. Egger-Lampl S, Gerdenitsch C, Deinhard L, Schatz R, Hold P (2019) Assembly instructions with AR: towards measuring interactive assistance experience in an industry 4.0 context. Eleventh international conference on quality of multimedia experience (QoMEX), IEEE, Berlin, pp. 1-3. https://doi.org/10.1109/QoMEX.2019.8743266

  15. Fraga-Lamas P, Fernández-Caramés TM, Blanco-Novoa O, Vilar-Montesinos MA (2018) A review on industrial augmented reality Systems for the Industry 4.0 shipyard. IEEE Access 6:13358–13375. https://doi.org/10.1109/ACCESS.2018.2808326

    Article  Google Scholar 

  16. Ghini V, Casadei M, Borgo FD, Vincenzi N, Prandi C, Mirri S (2019) Industry 4.0 and video monitoring: a multidimensional approach based on MPEG-DASH. 16th IEEE Annual Consumer Communications & Networking Conference (CCNC), IEEE, Las Vegas, pp. 1-6. https://doi.org/10.1109/CCNC.2019.8651683

  17. Gong L, Fast-Berglund A, Johansson B (2021) A framework for extended reality system development in manufacturing. IEEE Access 9:24796–24813. https://doi.org/10.1109/ACCESS.2021.3056752

    Article  Google Scholar 

  18. Gosh A, Maeder A, Baker M, Chandramouli D (2019) 5G evolution: view on 5G cellular technology beyond 3GPP release 15. IEEE access 7:127639 - 127651. https://doi.org/10.1109/ACCESS.2019.2939938

  19. Hassan SM, Ibrahim R, Bingi K, Chung TD, Saad N (2017) Application of wireless technology for control: a WirelessHART perspective. Procedia computer Science 105(supplement C): 240–247. https://doi.org/10.1016/j.procs.2017.01.217

  20. Hoshyar R, Wathan FP, Tafazolli R (2008) Novel low-density signature for synchronous CDMA systems over AWGN channel. IEEE Trans Signal Process 56(4):1616–1626. https://doi.org/10.1109/TSP.2007.909320

    Article  MathSciNet  MATH  Google Scholar 

  21. Hsu C, Kang L, You T, Jhong W (2017) Vision-based automatic identification tracking of steel products for intelligent steel manufacturing. IEEE international symposium on multimedia (ISM), IEEE, Taichung, pp. 376-377. https://doi.org/10.1109/ISM.2017.75

  22. Iradier E, Montalban J, Araniti G, Fadda M, Murroni M (2016) Adaptive resource allocation in LTE vehicular services using LDM. International symposium on broadband multimedia systems and broadcasting (BMSB), IEEE, Nara, pp. 1-3. https://doi.org/10.1109/BMSB.2016.7521985

  23. Iradier E, Montalban J, Fanari L, Angueira P (2019) On the use of spatial diversity under highly challenging channels for ultra reliable communications. 24th international conference on emerging technologies and factory automation (ETFA), IEEE, Zaragoza, pp. 200-207. https://doi.org/10.1109/ETFA.2019.8869055

  24. Iradier E, Montalban J, Fanari L, Angueira P, Seijo O, Val I (2019) NOMA-based 802.11n for broadcasting multimedia content in factory automation environments. International symposium on broadband multimedia systems and broadcasting (BMSB), IEEE, Jeju, pp. 1-6. https://doi.org/10.1109/10.1109/BMSB47279.2019.8971844

  25. Iradier E, Montalban J, Romero D, Wu Y, Zhang L, Li W (2019) NOMA based 5G NR for PTM communications. International symposium on broadband multimedia systems and broadcasting (BMSB), IEEE, Jeju, pp. 1-6. https://doi.org/10.1109/BMSB47279.2019.8971856

  26. Iradier E, Montalban J, Fanari L, Angueira P, Zhang L, Wu Y, Li W (2020) Using NOMA for enabling broadcast/unicast convergence in 5G networks. IEEE Trans Broadcast 66:503–514. https://doi.org/10.1109/TBC.2020.2981759

    Article  Google Scholar 

  27. Iradier E, Fanari L, Bilbao I, Montalban J, Angueira P, Seijo O, Val I (2021) Analysis of NOMA-based retransmission schemes for factory automation applications. IEEE Access 9:29541–29554. https://doi.org/10.1109/ACCESS.2021.3059069

    Article  Google Scholar 

  28. Islam SMR, Avazov N, Dobre OA, Kwak K (2017) Power domain non-orthogonal multiple access (NOMA) in 5G systems: potentials and challenges. IEEE Communications Surveys & Tutorials 19(2):721–742. https://doi.org/10.1109/COMST.2016.2621116

    Article  Google Scholar 

  29. Kumar M, Tripathi R, Tiwari S (2018) QoS guarantee towards reliability and timeliness in industrial wireless sensor networks. Multimed Tools Appl 77:4491–4508. https://doi.org/10.1007/s11042-017-4832-5

    Article  Google Scholar 

  30. Liu Y, Qin Z, Elkashlan M, Ding Z, Nallanathan A, Hanzo L (2017) Nonorthogonal multiple access for 5G and beyond. Proc IEEE 105(12):2347–2381. https://doi.org/10.1109/JPROC.2017.2768666

    Article  Google Scholar 

  31. M Series (2015) IMT vision—framework and overall objectives of the future development of IMT for 2020 and beyond. Recommendation ITU-R M2083–0

  32. Molisch AF et al (2004) IEEE 802.15. 4a channel model-final report. IEEE P802 15(4):1–41

    Google Scholar 

  33. Montalban J, Scopelliti P, Fadda M, Iradier E, Desogus C, Angueira P, Murroni M, Araniti G (2018) Multimedia multicast services in 5G networks: subgrouping and non-orthogonal multiple access techniques. IEEE Commun Mag 56(3):91–95. https://doi.org/10.1109/MCOM.2018.1700660

    Article  Google Scholar 

  34. Montalban J, Iradier E, Angueira P, Seijo O, Val I (2020) NOMA-based 802.11n for industrial automation. IEEE Access 8:168546–168557. https://doi.org/10.1109/ACCESS.2020.3023275

    Article  Google Scholar 

  35. Montgomery K, Candell R, Liu Y, Hany M (2020) Wireless user requirements for the factory workcell. US Department of Commerce, National Institute of Standards and Technology.

  36. Nawaratne R, Bandaragoda T, Adikari A, Alahakoon D, De Silva D, Yu X (2017) Incremental knowledge acquisition and self-learning for autonomous video surveillance. IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, IEEE, Beijing, pp. 4790–4795. https://doi.org/10.1109/IECON.2017.8216826

  37. Park SI, Lee JY, Myoung S, Zhang L, Wu Y, Montalban J, Kwon S, Lim BM, Angueira P, Kim HM, Hur N, Kim J (2016) Low complexity layered division multiplexing for ATSC 3.0. IEEE Trans Broadcast 62(1):233–243. https://doi.org/10.1109/TBC.2015.2492459

    Article  Google Scholar 

  38. Pedersen K, Pocovi G, Steiner J, Maeder A (2018) Agile 5G scheduler for improved E2E performance and flexibility for different network implementations. IEEE Commun Mag 56(3):210–217. https://doi.org/10.1109/MCOM.2017.1700517

    Article  Google Scholar 

  39. Rondón R, Gidlund M, Landernäs K (2017) Evaluating bluetooth low energy suitability for time-critical industrial iot applications. Int J Wireless Inf Networks 24(3):278–290. https://doi.org/10.1007/s10776-017-0357-0

    Article  Google Scholar 

  40. Sachs J, Wikstrom G, Dudda T, Baldemair R, Kittichokechai K (2018) 5G radio network design for ultra-reliable low-latency communication. IEEE Netw 32(2):24–31. https://doi.org/10.1109/MNET.2018.1700232

    Article  Google Scholar 

  41. Schulz P, Matthe M, Klessig H, Simsek M, Fettweis G, Ansari J, Ashraf SA, Almeroth B, Voigt J, Riedel I, Puschmann A, Mitschele-Thiel A, Muller M, Elste T, Windisch M (2017) Latency critical IoT applications in 5G: perspective on the Design of Radio Interface and Network Architecture. IEEE Commun Mag 55(2):70–78. https://doi.org/10.1109/MCOM.2017.1600435CM

    Article  Google Scholar 

  42. Seijo O, Fernández Z, Val I, López-Fernández JA (2018) SHARP: a novel hybrid architecture for industrial wireless sensor and actuator networks. 14th international workshop on factory communication systems (WFCS), IEEE, Imperia, pp. 1-10. https://doi.org/10.1109/WFCS.2018.8402358

  43. Tramarin F, Vitturi S, Luvisotto M, Zanella A (2016) On the use of IEEE 802.11n for industrial communications. IEEE Trans Ind Inf 12(5):1877–1886. https://doi.org/10.1109/TII.2015.2504872

    Article  Google Scholar 

  44. Varghese A and Tandur D (2014) Wireless requirements and challenges in industry 4.0. International conference on contemporary computing and informatics (IC3I), Mysore, pp. 634-638. https://doi.org/10.1109/IC3I.2014.7019732

  45. Zhang L, Li W, Wu Y, Wang X, Park SI, Kim HM, Lee JY, Angueira P, Montalban J (2016) Layered-division-multiplexing: theory and practice. IEEE Trans Broadcast 62(1):216–232. https://doi.org/10.1109/TBC.2015.2505408

    Article  Google Scholar 

  46. Zhang L, Wu Y, Li W, Rong B, Salehian K, Lafleche S, Wang X, Park SI, Kim HM, Lee JY, Hur N, Angueira P, Montalban J (2019) Layered-division-multiplexing for high Spectrum efficiency and service flexibility in next generation ATSC 3.0 broadcast system. IEEE Wirel Commun 26(2):116–123. https://doi.org/10.1109/MWC.2018.1800092

    Article  Google Scholar 

  47. Zhang L, Li W, Wu Y, Xue Y, Sousa E, Park SI, Lee JY, Hur N, Kim HM (2020) Using non-orthogonal multiplexing in 5G-MBMS to achieve broadband-broadcast convergence with high spectral efficiency. IEEE Trans Broadcast 66:490–502. https://doi.org/10.1109/TBC.2020.2983563

    Article  Google Scholar 

Download references

Acknowledgments

This work was supported in part by the Basque Government (Project IOTERRAZ) under Grant KK-2019/00046 ELKARTEK 2019, Grant IT1234-19, and the PREDOC Grant Program PRE_2020_2_0105, and in part by the Spanish Government (Project PHANTOM) under Grant RTI2018-099162-B-I00 (MCIU/AEI/FEDER, UE).

Availability of data and material

Not applicable.

Code availability

Not applicable.

Funding

This work was supported in part by the Basque Government (Project IOTERRAZ) under Grant KK-2019/00046 ELKARTEK 2019, Grant IT1234–19 and the PREDOC Grant Program PRE_2020_2_0105, and in part by the Spanish Government (Project PHANTOM) under Grant RTI2018–099162-B-I00 (MCIU/AEI/FEDER, UE).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Eneko Iradier.

Ethics declarations

Conflicts of interest/competing interests

Not applicable.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Iradier, E., Abuin, A., Fanari, L. et al. Throughput, capacity and latency analysis of P-NOMA RRM schemes in 5G URLLC. Multimed Tools Appl 81, 12251–12273 (2022). https://doi.org/10.1007/s11042-021-11086-6

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11042-021-11086-6

Keywords

Navigation