Abstract
In this paper the integration of a Dynamic Spectrum Access (DSA) technique in a wideband cognitive RF-Ethernet bridge for industrial control applications is presented. The proposed DSA scheme is based on two spectrum sensing algorithms and it allows avoiding any possible interference due to external communication systems or industrial equipments. Thus, the bridge is capable of carrying out an interference-free communication, providing the reliability and robustness required by industrial control applications. It also enables to expand a wired network to places where it is not possible to route a wire (such as moving or rotating elements) or replacing a wired link by a wireless one reducing maintenance and deployment costs. The RF-Bridge can work in the Industrial Scientific and Medical (ISM) bands of 868 MHz and 2.45 GHz. The FPGA implementation of this bridge is detailed in this contribution, as well as the measurement tests that have been carried out.











Similar content being viewed by others
References
EtherCAT: http://www.ethercat.org/default.htm.
PROFINET: http://www.profibus.com/technology/profinet/.
PROFISAFE: http://www.profibus.com/technology/profisafe/.
Hancke, G. P. (2012). Industrial wireless sensor networks: A selection of challenging applications. In Antennas and Propagation (EUCAP), 2012 6th European Conference on, (pp. 64–68).
Torrego, R., Val, I., Muxika, E. (2012). Small form factor Cognitive Radio implemented via FPGA partial reconfiguration replacing a wired video transmission systems. Proc. Wireless Innovation Forum Conference on Communications Technologies and Software Defined Radio (SDR-WInnComm’12). Washington (US).
Casado, F., Torrego, R., Arriola, A., Val, I. (2013). Fully reconfigurable FPGA-based cognitive radio platform for reliable communications. Proc. Wireless Innovation Forum European Conference on Communication Technologies and Software DefinedRadio (SDR’13 – WInnComm – Europe). Munich (Germany).
Yucek, T., & Arslan, H. (2009). A survey of spectrum sensing algorithms for cognitive radio applications. IEEE Communication Surveys and Tutorials, 11(1), 116–130.
Mohamad, M. H., Wen, H. C., Ismail, M. (2012). Matched filter detection technique for GSM band. 2012 International Symposium on Telecommunication Technologies, ISTT 2012. pp. 271–274.
Datta, R., Panaitopol, D., Fettweis, G. (2014). Cyclostationary detection of 5G GFDM waveform in cognitive radio transmission. Ultra-WideBand (ICUWB), 2014 I.E. International Conference on. pp. 108–112.
Bagwari, A., & Tomar, G. S. (2014). Cooperative spectrum sensing in multiple energy detectors based cognitive radio networks using adaptive double-threshold scheme. International Journal of Electronics, 101, 1546–1558.
Kosunen, M., Turunen, V., Kokkinen, K., & Ryynanen, J. (2013). Survey and analysis of cyclostationary signal detector implementations on FPGA. IEEE Journal on Emerging and Selected Topics in Circuits and Systems, 4, 541–551.
Luise, M., & Reggiannini, R. (1995). Carrier frequency recovery in all-digital modems for burst-mode transmissions. IEEE Transactions on Communications, 43(2/3/4), 1169–1178.
Meyr, H., Moeneclaey, M., & Fechtel, S. A. (1997). Digital communication receivers, synchronization, channel estimation, and signal processing. New York: Wiley. Chapter 8.4.3.
Le, L., Jun, D. M., Jones, D. L. (2013). Energy-efficient detection system in time-varying signal and noise power. ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing – Proceedings. pp. 2736–2740.
Vo, N., & Le-Ngoc, T. (2007). Maximum Likelihood (ML) Symbol Timing Recovery (STR) techniques for reconfigurable PAM and QAM modems. Wireless Personal Communications, 41, 379–391.
Adlard, J. F. (2000). Frequency shift filtering for cyclostationary signals. (Doctoral dissertation, University of York).
Nutaq PicoSDR: http://nutaq.com/en/products/picosdr.
Akerberg, J., Gidlund, M., Bjorkman, M. (2011). Future research challenges in wireless sensor and actuator networks targeting industrial automatio. Industrial Informatics (INDIN), 2011 9th IEEE International Conference on, vol., no., pp. 410, 415.
Val, I., Casado, F., Rodriguez, P. M., Arriola, A. (2014). FPGA-based wideband channel emulator for evaluation of Wireless Sensor Networks in industrial environments. In Emerging Technology and Factory Automation (ETFA), 2014 IEEE, Barcelona. pp. 1–7.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Funding
This work has been partly supported by EFITRANS (ETORTEK) and CIIRCOS (PC2013-68) projects of the Basque Government (Spain), and by COWITRACC (TEC2014-59490-C2-2-P) project of the Spanish Ministry of Economy and Competitiveness.
Rights and permissions
About this article
Cite this article
Rodríguez, P.M., Torrego, R., Casado, F. et al. Dynamic Spectrum Access Integrated in a Wideband Cognitive RF-Ethernet Bridge for Industrial Control Applications. J Sign Process Syst 83, 19–28 (2016). https://doi.org/10.1007/s11265-015-1091-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11265-015-1091-4