Skip to main content
SpringerLink
Log in

Low Voltage Rf Mems Capacitive Shunt Switches

  • Published:
Wireless Personal Communications Aims and scope Submit manuscript

Abstract

Micro-electro-mechanical-systems(MEMS) switches have low resistive loss, negligible power consumption, good isolation and high power handling capability compared with semiconductor switches. Lifetime of capacitive shunt switches strongly depends on the actuation voltage so low voltage switches is necessary to enhance its performance as well as to broaden its application area. This paper presents the design and simulation of low voltage capacitive shunt MEMS switches together with its RF performance for high frequency applications. The low voltage switches are realized by lowering the spring constant of the beam using serpentine spring designs together with large capacitive area so as to achieve the good RF performance as well. The pull-in voltage is analyzed with commercial CAD finite element analysis software CoventorWare. The electromagnetic performance in terms of scattering parameters, insertion loss, and isolation are analyzed with software Ansoft HFSS10. The switches achieved insertion loss \(<\)0.47 dB in on state from 2 to 40 GHz; it provided better than 25 dB isolation in off state with a capacitance ratio of 94–96. The actuation voltage as low as 1.5 V with actuation area \(110\,\times \,100\,\upmu \mathrm{m^2}\) along with good RF performance is reported. The design parameter optimization including selection of appropriate number of meanders and its width found to be one of the most sensitive factors affecting the spring stiffness and actuation voltage.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Rebeiz, G. M. (2003). RF MEMS Switchs: Status of the technology. In The 12th international conference on solid state sensors, actuators and microsystems (pp. 1726–1729), June 8–12, Boston: IEEE.

  2. Lahiri, SK., Saha, H., & Kundu, A. (2009). RF MEMS switch: An overview at-a glance. In International conference on computers and devices for communication.

  3. Rebeiz, G. M., & Muldavin, J.B. (2001). RF MEMS switches and switch circuits, IEEE microwave magazine, pp. 59–71.

  4. Rebeiz, G. M. (2003). RF MEMS: Theory, design and technology. Colorado: Wiley.

    Book  Google Scholar 

  5. Varadan, V. K., Vinoy, K. J., & Jose, K. A. (2003). RF MEMS and Their Applications. Colorado: Wiley.

    Google Scholar 

  6. Pacheco, S., Nguyen, C. T., & Katehi, L. P. B. (2000). Design of low actuation voltage RF MEMS switch (pp. 165–168). Baltimore: IEEE MTT-S International Microwave Symposium Digest.

    Google Scholar 

  7. Peroulis, D., & Pacheco, S. P. (2003). Electromechanical considerations in developing low-voltage RF MEMS switches. IEEE Transactions on Microwave Theory and Techniques, 51, 259–270.

    Article  Google Scholar 

  8. Abbaspour-Sani, E., & Afrang, S. (2006). A low voltage MEMS structure for RF capacitive switches. Progress in Electromagnetics Research, 65, 157–167.

    Article  Google Scholar 

  9. Song, M., Yin, J., & He, X. et al. (2008). Design and analysis of a novel low actuation voltage capacitive RF MEMS switches. Proceedings of the 3rd IEEE international confeference on nano/micro engineered and molecular systems.

  10. Jaafar, H., Sidek, O., Miskam, A., et al. (2009). Design and simulation of microelectromechanical system capacitive shunt switches. American Journal of Engineering and Applied Sciences, 2(4), 655–660.

    Article  Google Scholar 

  11. Song, T., Baek, S.-H., & Yoon, E. (2005). A low-voltage and low-power RF MEMS series and shunt switches actuated by combination of electrostatic and electromagnetic forces. IEEE Transaction on Microwave Theory and Techniques, 53, 2450–2457.

    Article  Google Scholar 

  12. Bhattacharya, S. K., Ayazi, F., & Papapolymerou, J. (2002). Low-cost low actuation voltage copper MEMS switches. In Published in Microwave Symposium Digest. 2002 IEEE MTT-S International (vol. 2, pp. 1225–1228).

  13. Chu, C.-H., Shinh, W.-P., & Chung, S.-Y., et al. (2007). A low actuation voltage electrostatic actuator for RF MEMS switch applications. Journal of micromechanics and microengineering. doi:10.1088/0960-1317/17/8/031.

  14. Ershadi, T. Z., Salimi, E., & Zolfkhani, H. (2012). Design and simulation a low voltage actuated RF MEMS switch with improve RF characteristics. Advanced Materials Research, 403–408, 4199–4204.

    Google Scholar 

  15. Persano, A., Cola, A., De Angelis, G., et al. (2011). RF MEMS switches with tantalum-based materials. Journal of Microelectromechanical Systems, 20(2), 365–370.

    Article  Google Scholar 

  16. Kim, J.-M., Lee, S., & Park, J.-H., et al. (2011). Electrostatically driven low-voltage micromechanical RF switches using robust single-crystal silicon actuators. Journal of Micromechanics and Microengineering, IOP Publishing, 20(6), 1324–1335.

Download references

Acknowledgments

The authors acknowledge the support provided by Department of Electronic science for providing the access to CoventorWare design tools under NPMASS (National Program on Micro and Smart Systems).

Author information

Authors and Affiliations

  1. Department of Electronics & Communication Engineering, University Institute of Engineering and Technology, Kurukshetra University, Kurukshetra, 136119, Haryana, India

    Rajneet Kaur, C. C. Tripathi & Dinesh Kumar

Authors
  1. Rajneet Kaur
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. C. C. Tripathi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Dinesh Kumar
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Rajneet Kaur.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kaur, R., Tripathi, C.C. & Kumar, D. Low Voltage Rf Mems Capacitive Shunt Switches. Wireless Pers Commun 78, 1391–1401 (2014). https://doi.org/10.1007/s11277-014-1823-y

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11277-014-1823-y

Keywords

Search

Navigation