Abstract
This research clarifies the horizontal and vertical alignment of the capacitive coupler to be used in electric vehicles for wireless power transfer. Using various compensation techniques, capacitive power transfer circuits were modeled and analyzed. For safety purposes, this concept is used to identify mutual capacitance and field emission around the charging system. The methodology of circuit formation for an effective coupler design was described. The output power of the compensation circuits implemented in the coupler design was obtained from mathematical analysis. The finite element analysis (FEA) method was used in the ANSYS Maxwell software package to find mutual capacitances and field emission area by the transmitter. The suitable compensation network was identified from various ways to calculate the output power. The coupler design with the alignment of the parallel plates in both vertical and horizontal orientations was proposed. The response of the mutual capacitance upon varying the length of the plates, air gap distance and misalignment positions were predicted. This paper contains suitable dimensions of capacitive plates and their respective capacitance value for different airgaps and misalignments of the plates placed on source and vehicle sides of the circuit. In addition to the modified-coupler design with the horizontally aligned plates, the coupler model with vertically aligned capacitive plates is proposed. This model is more suitable for wireless power transfer as it does not cause misalignment issues because of its symmetrical structure.
Similar content being viewed by others
Availability of Data and Materials
Not Applicable.
Code Availability
Not Applicable.
References
Ahmad, A., Alam, M. S., & Chabaan, R. (2017). A comprehensive review of wireless charging technologies for electric vehicles. IEEE Transactions on Transportation Electrification, 4(1), 38–63. https://doi.org/10.1109/TTE.2017.2771619
Wang, Y., Zhang, H., & Lu, F. (2022). Review, analysis, and design of four basic CPT topologies and the application of high-order compensation networks. IEEE Transactions on Power Electronics, 37(5), 6181–6193. https://doi.org/10.1109/TPEL.2021.3131625
Kodeeswaran, S., Nandhini Gayathri, M., Kannabhiran, A., & Sanjeevikumar, P. (2021). Design and performance analysis of four plates capacitive coupler for electric vehicle on-road wireless charging. In: 2021 24th International Symposium on Wireless Personal Multimedia Communications (WPMC), pp. 1–6. https://doi.org/10.1109/WPMC52694.2021.9700416
Kodeeswaran, S., Gayathri, M. N., Sanjeevikumar, P., Iete, F., & Peña-Alzola, R. (2023). High-power converters and challenges in electric vehicle wireless charging: A review. IETE Journal of Research. https://doi.org/10.1080/03772063.2023.2186958
Atallah, H. A., El Negm Yousef, M. M. A., & Abdel-Rahman, A. B. (2021). Efficiency improvement of dual-band wireless power transfer (DB-WPT) system with U-shape resonator and capacitively loaded e-shape defected ground structure (DGS). Wireless Personal Communications, 119(3), 2083–2091. https://doi.org/10.1007/S11277-021-08319-0/TABLES/2
Kim, J., Kim, J., Kong, S., Kim, H., Suh, I. S., & Suh, N. P. (2013). Coil design and shielding methods for a magnetic resonant wireless power transfer system. Proceedings of the IEEE, 101(6), 1332–1342. https://doi.org/10.1109/JPROC.2013.2247551
Villa, J. L., Sallán, J., Sanz Osorio, J. F., & Llombart, A. (2012). High-misalignment tolerant compensation topology for ICPT systems. IEEE Transactions on Industrial Electronics, 59(2), 945–951. https://doi.org/10.1109/TIE.2011.2161055
Ramos, I., Afridi, K., Estrada, J. A., & Popović, Z. (2016). Near-field capacitive wireless power transfer array with external field cancellation. In 2016 IEEE wireless power transfer conference, WPTC 2016. Institute of Electrical and Electronics Engineers Inc. https://doi.org/10.1109/WPT.2016.7498829
Lu, F., Zhang, H., Hofmann, H., & Mi, C. C. (2018). A double-sided LC-compensation circuit for loosely coupled capacitive power transfer. IEEE Transactions on Power Electronics, 33(2), 1633–1643. https://doi.org/10.1109/TPEL.2017.2674688
Zhang, H., Lu, F., Hofmann, H., Liu, W., & Mi, C. C. (2016). A four-plate compact capacitive coupler design and LCL-compensated topology for capacitive power transfer in electric vehicle charging application. IEEE Transactions on Power Electronics, 31(12), 8541–8551. https://doi.org/10.1109/TPEL.2016.2520963
Lu, F., Zhang, H., Hofmann, H., & Mi, C. (2015). A double-sided LCLC-compensated capacitive power transfer system for electric vehicle charging. IEEE Transactions on Power Electronics, 30(11), 6011–6014. https://doi.org/10.1109/TPEL.2015.2446891
Huang, L., Hu, A. P., Swain, A., & Dai, X. (2014). Comparison of two high frequency converters for capacitive power transfer. In 2014 IEEE energy conversion congress and exposition, ECCE 2014 (pp. 5437–5443). Institute of Electrical and Electronics Engineers Inc. https://doi.org/10.1109/ECCE.2014.6954146
Kodeeswaran, S., & Nandhini Gayathri, M. (2021). Performance investigation of capacitive wireless charging topologies for electric vehicles. In: 2021 international conference on innovative trends in information technology, ICITIIT 2021. https://doi.org/10.1109/ICITIIT51526.2021.9399608
Chabalko, M., Besnoff, J., Laifenfeld, M., & Ricketts, D. S. (2017). Resonantly coupled wireless power transfer for non-stationary loads with application in automotive environments. IEEE Transactions on Industrial Electronics, 64(1), 91–103. https://doi.org/10.1109/TIE.2016.2609379
Panchal, C., Stegen, S., & Lu, J. (2018). Review of static and dynamic wireless electric vehicle charging system. Engineering Science and Technology, an International Journal. https://doi.org/10.1016/j.jestch.2018.06.015
Zhang, H., Lu, F., Hofmann, H., Liu, W., & Mi, C. C. (2018). Six-plate capacitive coupler to reduce electric field emission in large air-gap capacitive power transfer. IEEE Transactions on Power Electronics, 33(1), 665–675. https://doi.org/10.1109/TPEL.2017.2662583
In, P. U., & Hys, H. E. P. (2020). International commission on non-ionizing radiation protection Icnirp guidelines for limiting exposure To (Vol. 118).
C95.1-2005–C95.1-2005–IEEE standard for safety levels with respect to human exposure to radio frequency electromagnetic fields, 3 kHz to 300 GHz–IEEE Standard. (n.d.). Retrieved October 26, 2020, from https://ieeexplore.ieee.org/document/1626482?denied
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kodeeswaran, S., Nandhini Gayathri, M., Peña-Alzola, R. et al. Electric Vehicle Wireless Charging- Design and Analysis Using 1 MHz Circuit Capacitive Coupler. Wireless Pers Commun 131, 3027–3052 (2023). https://doi.org/10.1007/s11277-023-10600-3
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11277-023-10600-3