Abstract
Sheet metal hydroforming is a deep drawing process that uses a pressure medium for load transmission. The process is mainly influenced by the control of the blank holder force and the fluid pressure. This report describes investigations of a newly developed process-control system. Process variables can be controlled by the sealing state of the tool. The detection is performed by a CCD-camera system that allows the continuous recording of occurring leakages. Different control strategies can be used to control the multiple process parameters. This paper describes the performance and the limits of the aforementioned technology.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-007-0056-2/MediaObjects/11740_2007_56_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-007-0056-2/MediaObjects/11740_2007_56_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-007-0056-2/MediaObjects/11740_2007_56_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-007-0056-2/MediaObjects/11740_2007_56_Fig4_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-007-0056-2/MediaObjects/11740_2007_56_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-007-0056-2/MediaObjects/11740_2007_56_Fig6_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-007-0056-2/MediaObjects/11740_2007_56_Fig7_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-007-0056-2/MediaObjects/11740_2007_56_Fig8_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-007-0056-2/MediaObjects/11740_2007_56_Fig9_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-007-0056-2/MediaObjects/11740_2007_56_Fig10_HTML.gif)
Similar content being viewed by others
References
DIN Deutsches Institut für Normung e.V. (2003) DIN 8584-3 , Issue 2003–09; Fertigungsverfahren Zugdruckumformen––Part 3: Tiefziehen; Einordnung, Unterteilung, Begriffe. Beuth Verlag, Berlin
Groche P, Metz C, Kaufmann M (2004) DIN-Fachbericht 137: Einbindung der Innenhochdruck-Verfahren in die Normenreihe der DIN 8580ff––Ausgabe 2003–09; DIN Deutsches Institut für Normung e.V. (Ed); 1st Vol. 1, 2004; Beuth Verlag GmbH, Berlin, Wien, Zürich
Metz C (2005) Aktiv-elastische Werkzeugsysteme zum Tiefziehen mit Innenhochdruck, vol 65; Darmstadt (Germany), Technische Universität, PhD thesis, Shaker, Aachen
Dick P (1997) Technologie des Hochdruckumformens ebener Bleche. PhD thesis, Darmstadt University of Technology, Germany; Shaker, Aachen
Hein P (1999) Innenhochdruck-Umformen von Blechpaaren: Modellierung, Prozessauslegung und Prozessführung. PhD thesis, University of Erlangen-Nuernberg, Germany; Meisenbach, Bamberg
Celeghini M (2004) Wirkmedienbasierte Blechumformung: Grundlagen-untersuchungen zum Einfluss von Werkstoff und Bauteilgeometrie. PhD thesis, University of Erlangen Nuernberg, Germany; Meisenbach, Bamberg
Schmoeckel D, Hielscher C, Huber R, Geiger M (1999) Metal forming of tubes and sheets with liquid and other flexible media. Ann CIRP 48(2):497–513
Groche P, Ertuğrul M (2005) Optical detection of leakages during sheet metal hydroforming. In: Wissenschaftliche Gesellschaft für Produktionstechnik (WGP)––Annals of the German Academic Society for Production Engineering, Braunschweig, XII(2), pp 73–76
Groche P, Ertuğrul M, Metz C (2005) Increase of process stability of sheet metal hydroforming due to feed back control. In: Steel Research International, vol. 76, Special Issue on Sheet Metal Hydroforming, 12/(2005), pp 879–883
Neugebauer R, Bahn V, Noack S (2006) Gesteuerte, partielle Beeinflussung des Werkstoffflusses zur Erweiterung der Umformgrenzen beim Innenhochdruck-Blechumform-Prozess (IHB). In: DFG final report (SPP 1098) sheet metal hydroforming, Institut für Umformtechnik und Leichtbau, Shaker, Aachen, pp 289–303
Bobbert S (2000) Simulationsgestützte Auslegung für das Innenhochdruck-Umformen von Blechpaaren. PhD thesis, University of Erlangen-Nuremberg, Germany; Meisenbach, Bamberg
Groche P, Ertuğrul M (2006) Erhöhung der Prozesssicherheit beim IHU von unverschweißten Blechen durch Regelung. In: DFG Final Report (SPP 1098) sheet metal hydroforming, IUL, Institut für Umformtechnik und Leichtbau, Shaker, Aachen, pp 247–256
Haberäcker P (1995) Praxis der Digitalen Bildverarbeitung und Mustererkennung. Carl Hanser, München
Author information
Authors and Affiliations
Corresponding author
Additional information
The investigations presented in this paper were carried out within the research project “Erhöhung der Prozesssicherheit durch Regelung beim Innenhochdruck Umformen von unverrschweißten Blechen” a part of the Priority Program SPP 1098 „Wirkmedienbasierte Fertigungstechniken zur Blechumformung”, supported by the Deutsche Forschungsgemeinschaft (DFG).
Rights and permissions
About this article
Cite this article
Groche, P., Ertuğrul, M. Process control at the sealing line during sheet metal hydroforming. Prod. Eng. Res. Devel. 2, 3–8 (2008). https://doi.org/10.1007/s11740-007-0056-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11740-007-0056-2