Abstract
The aeronautic industry has to face the demand of cost reduction by its customers. These costs are divided into acquisition and operating costs. Both can be reduced by optimization and automation of production steps and by using highly integrated light weight structures. Within the EU-founded FP 6 project ECOSHAPE a laser beam forming (LBF) process for the laser beam bending of complex fuselage aluminum panels has been developed. The aim was to build up the fundamental know-how for an industrial manufacturing process performing most production steps in flat condition due to a minimum of machining costs, technological complexity and a maximum of robustness and reliability. To facilitate the cost intensive qualification of the LBF-process the metallurgical behavior of the aluminum alloys is investigated as well as the influences of the single structural elements of the fuselage panels like stingers and pockets on the forming result. For the industrial upgrade the process is integrated into a discrete control loop using the geometry of the panel as control variable.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-008-0100-x/MediaObjects/11740_2008_100_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-008-0100-x/MediaObjects/11740_2008_100_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-008-0100-x/MediaObjects/11740_2008_100_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-008-0100-x/MediaObjects/11740_2008_100_Fig4_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-008-0100-x/MediaObjects/11740_2008_100_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-008-0100-x/MediaObjects/11740_2008_100_Fig6_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-008-0100-x/MediaObjects/11740_2008_100_Fig7_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-008-0100-x/MediaObjects/11740_2008_100_Fig8_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-008-0100-x/MediaObjects/11740_2008_100_Fig9_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11740-008-0100-x/MediaObjects/11740_2008_100_Fig10_HTML.gif)
Similar content being viewed by others
References
Schumann U (2006) Aviation and climate change: options for mitigation, European aeronautic days 2006, 2006
Kopp R (1995) Flexible Umformtechnik. In: Abschlußkolloquium zu DFG-Schwerpunktprogramm. Mainz
Pfeiffer R (1989) Richten und Umformen mit der Flamme, Die schweißtechnische Praxis, band 10
Magee J, Watkins KG, Steen WM (1998) Laser bending of high strength alloys. J Laser Appl 10/4
Hornfeck T, Silvanus J, Zaeh MF, Schoberth A (2005) ECOSHAPE—a robust laser beam forming process of aluminium alloys for aerospace applications. Proceedings of the 1st international workshop on thermal forming (IWOTE´05)
Yanjin G, Sheng S, Guoqun Z, Yiguo L (2005) Influence of material properties on the laser forming process of sheet metals. J Mater Process Technol 167:124–131 167/pp
Watkins KG, Edwardson SP, Magee J, Dearden G, French P, Cooke RL, Sidhu J, Calder NJ (2001) Laser forming of aerospace alloys. Proceedings of the aerospace manufacturing conference 01
Hornfeck T, Silvanus J, Schoberth A, Zäh MF (2007) Laser beam forming of complex aluminium fuselage structures. Proceedings of the 2nd international conference on new forming technology (ICNFT), pp 221–230
DIN_50125 (2004) Prüfung metallischer Werkstoffe—Zugproben. Beuth Verlag
Merklein M (2001) Laserstrahlumformen von Aluminiumwerkstoffen—Beeinflussung der Mikrostruktur und der mechanischen Eigenschaften, Meisenbach, Bamberg
Gottstein G (1998) Physikalische Grundlagen der Materialkunde. Springer, Heidelberg
Geiger M, Brandt V, Otto A, Menzel T (1999) Concept for a closed loop control system for laser bending of extrusions. The 32nd CIRP international seminar in manufacturing systems, pp 263–271
Thomson G, Pridham A (1997) A feedback control system for laser forming. Mechatronics 7/5:429–441
Toulukain YS, DeWitt PD (1970) Thermal radiativ properties, metallic elements and alloys
Roebuck R, Edwards G, Gee MG (2005) Characterisation of oxidising metal surfaces with a two colour pyrometer. Mater Sci Technol 21/4:831–840
Kim J, Na SJ (2005) Feedback control for 2D free curve laser forming. Opt Laser Technol 37:139–146
Hutterer A (2004) Entwicklung prozessüberwachender Regelkreise für flexible Formgebungsprozesse. Meisenbach, Bamberg
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zaeh, M.F., Hornfeck, T. Development of a robust laser beam bending process for aluminum fuselage structures. Prod. Eng. Res. Devel. 2, 149–155 (2008). https://doi.org/10.1007/s11740-008-0100-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11740-008-0100-x