Abstract
An actual analysis in the tool and mould making sector showed that methods and programs insufficiently support the manufacturers of pressure die casting moulds in the quotation costing process. The primary aim of quotation costing is to generate many first-class bids in order to gain a high quantity of profitable orders. For this purpose companies have to achieve a high calculation precision with low expenditure. In addition, a comprehensible calculation is of great importance in order to enable an internal and external comparability and analysis as well as to permit the customer to assess the performance offered. In order to support companies of the tool and mould making concerning these matters, a working group from industry and science analyzed the quotation costing made by manufacturers of pressure die casting moulds. The article discusses the results of this analysis and describes the development of a rule-based calculation approach.
Similar content being viewed by others
References
VDG: Verein Deutscher Gießereifachleute e.V. (2001) Rationellere Angebotserstellung durch Aufbe-reitung von Expertenwissen und Schaffung rechentechnischer Hilfsmittel, VDG Fachbericht, Düsseldorf
Hauschild G (1994) Entwicklung eines Verfahrens zur dynamischen Angebotskalkulation für Unter-nehmen der Einzel- und Kleinserienfertigung, Dissertation RWTH Aachen
Winter G (2001) Leitfaden zur Angebotserstellung. In: WEKA Praxis Lösungen, Fachverlag für technische Führungskräfte, Kissing
Neff T (2002) Front load costing: Produktionskosten-management auf der Basis unvollkommener Informationen, Deutscher Univer-sitäts Verlag (DUV), Gabler Edition Wissenschaft, Wiesbaden
Eversheim W (1993) Wege zur kundengerechten Angebotskalkulation, VDI-Z, 6/1993, pp 78–81
Bronner A (1996) Angebots—und Projektkalkulation für Praktiker. Springer, Berlin
Knoblach J (1999) Beitrag zur rechnergestützten verursachungsgerechten Angebotskalkulation von Blechteilen mit Hilfe wissensbasierter Methoden, Fertigungstechnik-Erlangen, Band 98, Erlangen
Fonseca M, Henriques E, Ferreira A, Jorge J (2007) Assisting mould quotation through retrieval of similar data. In: Cunha P, Maropaulos PG (eds) Digital enterprise technology. Springer, Berlin, pp 527–534
Wang H, Zhou XH, Ruan XY (2003) Research on injection mould intelligent cost estimation system and key technologies. Int J Adv Manuf Technol 3:215–222
Fagade A, Kazmer DO (2000) Early cost estimation for injection molded parts. J Injection Mould Technol 4(3):97–106
Fischer JO (2007) Softwareunterstütze Angebots-kalkulation mit Kostenfunktionen. ZWF 102:233–238
Bouaziz Z, Ben Younes J, Zghal A (2006) Cost estimation system of dies manufacturing based on the complex machining features. Int J Adv Manuf Technol 28:262–271
Nagahanumaiah K, Ravi B, Mukherjee NP (2005) An integrated framework for die a mold cost estimation using features and tooling parameters. Int J Adv Manuf Technol 26:1138–1149
Ort A (2000) Entwicklungsbegleitende Kalkulation mit Teilebibliotheken, Dissertation TU Clausthal
Schuh G (2005) Produktkomplexität managen: Strategien–Methoden–Tools. Carl Hanser, München
Pahl G, Beitz W (1993) Konstruktionslehre: Methoden und Anwendung, 3. Auflage. Springer, Berlin
Köhler P, Lupa N, Danjou S (2008) Feature-basierende Produktmodellierung zur Sicherung des Wissenstransfers. CAD-CAM Rep Nr. 2:50–54
Puppe F (1989) Wissensrepräsentation und Problem-lösungsstrategien in Expertensystemen, Luck, K.v. Künstliche Intelligenz, Informatik-Fachbericht, vol 203. Springer, Berlin
Warnecke G (1991) Expertensysteme in CIM. In: Bey L (ed) CIM Fachmann. Springer, Berlin
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Denkena, B., Lorenzen, LE. & Schürmeyer, J. Rule-based quotation costing of pressure die casting moulds. Prod. Eng. Res. Devel. 3, 87–94 (2009). https://doi.org/10.1007/s11740-008-0139-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11740-008-0139-8