Abstract
Modular system-based engineering is the key to a quick, customized machine and plant configuration. This approach is seen as the best method to implement different functional requirements with a minimum amount of resources. The interdisciplinary configuration of control systems to automate machines has previously not been supported by engineering tools. This is partially due to the lack of standardized mechatronic information models. The machine manufacturer is required to create the necessary mechatronic information models uniquely for each control system independently. Thus, he does not comply with any modeling specifications. As a result, the mechatronic information models are not applicable for other control system architectures. The conventionally used mechatronic information models as well as the manufacturer-specific engineering tools define the control hardware components and their configurations. An abstraction of the logical and functional layers does not take place. Consequently, a mechatronic control architecture model is required. This architecture can serve as a modeling basis in modular system-based interdisciplinary engineering tools. Therefore, an approach to a manufacturer independent, mechatronic information model for control systems is the subject of this article.
Similar content being viewed by others
References
Dietz P (1983) Baukastensystematik und methodisches Konstruieren im Werkzeugmaschinenbau. Werkstatt und Betrieb 116:185–189
Korajda I, Seyfarth M, Pritschow G (2004) Disziplinübergreifende Baukastensysteme. Konfigurieren von Fertigungseinrichtungen aus einem disziplinübergreifenden Baukasten. wt Werkstattstechnik online 94(5):215–219
Litto M et al (2004) Baukastenbasiertes Engineering mit Föderal—Ein Leitfaden für Maschinen- und Anlagenbauer. VDMA Verlag, Frankfurt a. M
N.N. (2009) FÖDERAL. Projekt-Homepage. http://www.foederal.org/index.htm (03/02/2009)
Kohlhase N (1997) Strukturieren und Beurteilen von Baukastensystemen: Strategien, Methoden, Instrumente. VDI Verlag, Düsseldorf (Fortschr.-Ber. VDI Reihe 1 Nr. 275). Darmstadt, Techn. Hochsch., Diss., 1996
Balzert H (2000) Lehrbuch der Software-Technik, Software-Entwicklung, 2.Auflage. Spektrum Akademischer Verlag, Heidelberg
Litto M (2002) Störungsinformationssystem—Informationsmodell und Erstellungssystematik. Dissertation 2002, University of Stuttgart, Jost Jetter Verlag, Heimsheim, (ISW Forschung und Praxis; 144)
Brandl T (1999) Anlageninformationsmodell—Informationsmodell und Erstellungssystematik. Dissertation 1999, University of Stuttgart, Jost Jetter Verlag, Heimsheim (ISW Forschung und Praxis; 130)
N.N. (2009) The Object Management Group (OMG). http://www.omg.org/ (03/02/2009)
N.N. (2009) OMG’s MetaObject Facility (MOF). http://www.omg.org/mof/ (03/02/2009)
Lewek J (2005) Adaptierbares Informationssystem zur Erstellung baukastenbasierter Fertigungseinrichtungen. Dissertation 2004, University of Stuttgart, Jost Jetter Verlag, Heimsheim (ISW Forschung und Praxis; 151)
Lutz R (1999) Softwaretechnik für maschinennahe Steuerungsfunktionen bei Fertigungseinrichtungen. Dissertation 1999, University of Stuttgart, Jost Jetter Verlag, Heimsheim (ISW Forschung und Praxis; 132)
Angerbauer R (2002) Baukastensystematik in der Steuerungstechnik auf Basis einer Föderalen Informationsarchitektur. Institut für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen: Workshop “Fit für die maßgeschneiderte Massenfertigung durch agile, rekonfigurierbare Fertigungssysteme”, 20/03/2002, Stuttgart
N.N. (2009) Mind8 Engineering Center. Stuttgart
Angerbauer R, Lewek J, Litto M (2003) Sondermaschinen effizient engineert—SPS-Programme und Schaltpläne auf Knopfdruck. In: IEE 48, No. 04, pp 32–34
N.N. (2009) Comos Basic. Comos Industrie Solutions GmbH, Schwelm
N.N. (2008) Technical paper, PLCopen Technical Committee 6, XML Formats for IEC 61131-3, Version 2.0—Official Release. http://www.plcopen.org/ (12/12/2008)
N.N. (2009) Technical documentation, Bosch Rexroth, Lohr am Main, http://www.boschrexroth.com/various/utilities/mediadirectory/
Pahl G, Beitz W (2007) Konstruktionslehre—Grundlagen erfolgreicher Produktentwicklung Methoden und Anwendung. 7. Auflage. Springer-Verlag, Berlin
Lunze J (2008) Regelungstechnik I—Systemtheoretische Grundlagen, Analyse und Entwurf einschleifiger Regelungen, 7.Auflage. Springer-Verlag, Berlin
N.N. (2004) VDI-Richtlinie VDI 2206 June 2004: Entwicklungsmethodik für mechatronische Systeme
N.N. (2010) IndraDrive, Technical Documentation, Bosch Rexroth AG, Lohr am Main, 2010 http://www.boschrexroth.com/various/utilities/mediadirectory/ (30.01.2010)
N.N. (2007) Flow wrapper picture by Bosch Rexroth AG, Lohr am Main
Conflict of interest statement
The authors declare that they have no conflict of interest.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Reuter, A., Kircher, C. & Verl, A. Manufacturer-independent mechatronic information model for control systems. Prod. Eng. Res. Devel. 4, 165–173 (2010). https://doi.org/10.1007/s11740-010-0220-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11740-010-0220-y