Abstract
This paper presents the development of a micro-positioning system for the increase of operation accuracy of machine tools. A highly dynamic piezo-actuated micropump coupled with a hydraulic cylinder transforms small strokes of the piezoelectric actuator into a continuous piston movement. Fast-switching active valves direct the volume flow. Crucial for the functionality of the pump module is the sealing function of the membrane to isolate the piezoelectric actuator unit against high pressure fluid. Therefore, the requirements for foil membrane selection are investigated by means of a developed test bench. It is demonstrated that a successful test of foil membrane materials provides a closer insight into the entire valve characteristics.
Similar content being viewed by others
References
Weck M (1992) Werkzeugmaschinen—Fertigungssysteme. Band 4: Messtechnische Untersuchung und Beurteilung. VDI Verlag, Düsseldorf
Abele E, Hanselka H, Haase F, Schlote D, Schiffler A (2008) Development and design of an active work piece holder driven by piezo actuators. Prod Eng Res Devel (WGP) 2(4):437–442
Brecher C, Hirsch P (2004) Compensation of thermo-elastic machine tool deformation based on control internal data. Ann CIRP 53:1
Zhang G, Veale R, Charlton T, Borchardt B, Hocken R (1985) Error compensation of coordinate measuring machines. Ann CIRP v34:445–448
Möhring HC (2009) Fast reacting maintenance of forming tools with a transportable machining unit. Ann CIRP Manuf Technol 58(1):S359–S362
Fleischer J, Munzinger, C, Weis M, Wauer J, Rudolf C (2007) Adaptronische Kompensation geometrischer Maschinenfehlern Werkzeugmaschinen mit Parallelkinematiken. 2. Berichtskolloquium SPP 1156
Neugebauer R, Denkena B, Wegener K (2007) Mechatronic systems for machine tools. CIRP Ann Manuf Technol 56(2):657–686
Mussa S (2002) Aktive Korrektur von Verlagerungen in Werkzeugmaschinen, Dissertation, Institut für Werkzeugmaschinen und Betriebstechnik (wbk) der Universität Karlsruhe
Tönshoff HK, Denkena B, Götz T (2002) Piezoelectric actuator based preload control unit for machine tool spindles. Prod Eng Res Devel 9(1):117–122
Denkena B, Simon S (2008) Computer-aided analysis of flow-characteristics of a micro-positioning system. Prod Eng Res Devel (WGP) 2(2):185–191
Denkena B, Simon S (2008) Simulative analysis of a piezo-hydraulic micro-positioning system. ACTUATOR 2008, 11th International Conference on New Actuators & 5th International Exhibition on Smart Actuators and Drive Systems, 9-11 June 2008, Bremen, p. 1018–1021
Diehl A, Engel U (2008) Grenzformänderung metallischer Folien. Wtwerkstattstechnik online, Jahrgang 98 H. 11/12, S982–S987
Nakazima K, Kikuma T, Hasuka T (1968) Study on the formability of steel sheets. Yawata Tech Rep 284:140–141
Doege E, Behrens B-A (2006) Handbuch Umformtechnik: Grundlagen, Technologien, Maschinen. Springer, Berlin
Voges-Schwieger K, Behrens B-A, Hübner S (2009) Material characterization of local strain-induced α’-martensitic reinforcements. Int J Mater Form 2(Suppl 1):1–4. doi:10.1007/s12289-009-0452-6
Voges-Schwieger K (2010) Lokale Festigkeitserhöhung metastabiler austenitischer Blechwerkstoffe durch verformungsinduzierte α’-Martensitbildung, Berichte aus dem IFUM, Dissertation Leibniz Universität Hannover, Band 04/2010, ISBN 978-3-941416-66-6
Pham H-D, Trompeter M, Tekkaya AE (2010) On the reduction of the gloss property of organic coated sheet metal after forming. Prod Eng Res Develop 4(5):483–489
DIN EN ISO 12004-2 (2008) Deutsche Fassung EN ISO 12004-2:2008, Metallische Werkstoffe -Bleche und Bänder—Bestimmung der Grenzformänderungskurve Teil 2: Bestimmung von Grenzformänderungskurven im Labor, ISO 12004-2:2008), Beuth Verlag
Acknowledgments
The authors thank the German Research Foundation (DFG) for funding this research concerning a piezo-hydraulic micro-positioning system for high loads (DE 447/25).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pluemer, S., Voges-Schwieger, K., Denkena, B. et al. Development of an advanced micro-positioning system for increasing operation accuracy: consideration of high pressure sealing. Prod. Eng. Res. Devel. 6, 213–218 (2012). https://doi.org/10.1007/s11740-012-0361-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11740-012-0361-2