Skip to main content
Log in

Torque-based adaptive temperature control in friction stir welding: a feasibility study

  • Production Process
  • Published:
Production Engineering Aims and scope Submit manuscript

    We’re sorry, something doesn't seem to be working properly.

    Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.

Abstract

Friction stir welding (FSW) is an innovative welding technology. It offers unique advantages due to the fact that the solidus temperatures of the workpieces are not exceeded. FSW is typically applied to lightweight aluminum structures where the joint quality is crucial. As the weld quality is mainly governed by the welding temperature, a temperature control system was developed to ensure homogeneous weld properties. In this study, two challenges were addressed. First, a novel temperature measuring system was introduced. For this purpose, an empirical correlation between the welding temperature and the process torque was suggested. Second, a \(\mathcal {L}1\) adaptive controller combined with an input linearization method was used to develop a torque-based temperature control system. This control structure was selected due to its robustness and fast adaption rates. Sufficient robustness was required, to account for the mechanical vibrations that occur when using industrial robots for welding. These vibrations can be detected as oscillations in the torque signal. The developed control system was successfully integrated into to an FSW machine and the achievable control quality as well as the absolute accuracy of the measuring method were investigated in experiments.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

Similar content being viewed by others

References

  1. Lohwasser D, Chen Z (2010) Introduction. In: Lohwasser D, Chen Z (eds) Friction stir welding: From basics to applications. Woodhead Publishing Limited, Cambridge, pp 1–12

    Chapter  Google Scholar 

  2. Colligan KJ (2010) The friction stir welding process: an overview. In: Lohwasser D, Chen Z (eds) Friction stir welding: from basics to applications. Woodhead Publishing Limited, Cambridge, pp 15–41

    Chapter  Google Scholar 

  3. Zettler R, Vugrin T, Schmuecker M (2010) Effects and defects of friction stir welds. In: Lohwasser D, Chen Z (eds) Friction stir welding: From basics to applications. Woodhead Publishing Limited, Cambridge, pp 245–276

    Chapter  Google Scholar 

  4. Cederqvist L, Garpinger O, Hägglund T, Robertsson A (2012) Cascade control of the friction stir welding process to seal canisters for spent nuclear fuel. Control Eng Pract 20:35–48. https://doi.org/10.1016/j.conengprac.2011.08.009

    Article  Google Scholar 

  5. de Backer J (2014) Feedback Control of Robotic Friction Stir Welding. Dissertation, University West

  6. Bachmann A, Zaeh MF (2016) Pyrometer-assisted temperature control in friction stir welding. In: 11th International Symposium on FSW. Cambridge (May 17–19)

  7. Ross K, Sorensen C (2013) Paradigm shift in control of the spindle axis. In: Mishra RS et al (eds) Friction stir welding and processing VII. Wiley, Hoboken, pp 321–328

    Google Scholar 

  8. Fehrenbacher A, Duffie NA, Ferrier NJ, Pfefferkorn FE, Zinn MR (2014) Effects of tool-workpiece interface temperature on weld quality and quality improvements through temperature control in friction stir welding. Int J Adv Manuf Technol 71:165–179. https://doi.org/10.1007/s00170-013-5364-4

    Article  Google Scholar 

  9. Fehrenbacher A, Duffie NA, Ferrier NJ, Zinn MR, Pfefferkorn FE (2010) Temperature measurement and closed-loop control in friction stir welding. In: 8th International Symposium on FSW. Timmendorfer Strand (Germany) (May 18-20)

  10. de Backer J, Bolmsjö G, Christiansson AK (2014) Temperature control of robotic friction stir welding using the thermoelectric effect. Int J Adv Manuf Technol 70:375–383. https://doi.org/10.1007/s00170-013-5279-0

    Article  Google Scholar 

  11. Davis TA, Shin YC, Yao B (2011) Observer-based adaptive robust control of friction stir welding axial force. IEEE/ASME Trans Mechatron 16:1032–1039. https://doi.org/10.1109/TMECH.2010.2071417

    Article  Google Scholar 

  12. Longhurst WR, Strauss AM, Cook GE, Fleming PA (2010) Torque control of friction stir welding for manufacturing and automation. Int J Adv Manuf Technol 51:905–913. https://doi.org/10.1007/s00170-010-2678-3

    Article  Google Scholar 

  13. Gibson B, Cook G, Prater T, Longhurst W, Strauss AM, Cox CD (2011) Adaptive torque control of friction stir welding for the purpose of estimating tool wear. Proc Inst Mech Eng B 225:1293–1303. https://doi.org/10.1177/2041297510393629

    Article  Google Scholar 

  14. Roth A, Hake T, Zaeh MF (2014) An analytical approach of modelling friction stir welding. Procedia CIRP 18:197–202. https://doi.org/10.1016/j.procir.2014.06.131

    Article  Google Scholar 

  15. Hovakimyan N, Cao C (2010) \({\cal{L}}1\) adaptive control theory. Guaranteed robustness with fast adaptation. Society for Industrial and Applied Mathematics, Philadelphia

  16. Hellmundt F, Wildschek A, Maier R, Osterhuber R, Holzapfel F (2015) Comparison of \({\cal{L}}1\) Adaptive augmentation strategies for a differential PI baseline controller on a longitudinal F16 aircraft model. In: Bordeneuve-Guibé J et al (eds) Advances in aerospace guidance, navigation and control. Springer, New York, pp 99–118

    Google Scholar 

  17. Xargay E, Hovakimyan N, Dobrokhodov V, Statnikov R, Kaminer I, Cao C, Gregory I (2010) \({\cal{L}}1\) adaptive flight control system: systematic design and verification and validation of control metrics. In: Proceedings of AIAA Guidance, Navigation, and Control Conference. Toronto (August 2–5)

  18. Colligan KJ, Mishra RS (2008) A conceptual model for the process variables related to heat generation in friction stir welding of aluminum. Scr Mater 58:327–331. https://doi.org/10.1016/j.scriptamat.2007.10.015

    Article  Google Scholar 

  19. Schmidt H, Hattel J, Wert J (2003) An analytical model for the heat generation in friction stir welding. Model Simul Mater Sci Eng 12:143–157. https://doi.org/10.1088/0965-0393/12/1/013

    Article  Google Scholar 

  20. Arora A, DebRoy T, Bhadeshia H (2011) Back-of-the-envelope calculations in friction stir welding–velocities, peak temperature, torque, and hardness. Acta Mater 59:2020–2028. https://doi.org/10.1016/j.actamat.2010.12.001

  21. Shercliff HR, Colegrove PA (2007) Process modeling. In: Mishra RS, Mahoney WM (eds) Friction stir welding and processing. ASM International, Materials Park, pp 187–217

  22. Schmidt H (2010) Modelling thermal properties in Friction Stir Welding. In: Lohwasser D, Chen Z (eds) Friction stir welding: from basics to applications. Woodhead Publishing Limited, Cambridge, pp 277–313

    Chapter  Google Scholar 

  23. Xargay E, Hovakimyan N, Cao C (2009) \({\cal{L}}1\) adaptive output feedback controller for nonlinear systems in the presence of unmodeled dynamics. In: American Control Conference. St. Louis (June 10–12)

  24. Pomet JB, Praly L (1992) Adaptive nonlinear regulation: estimation from the Lyapunov equation. IEEE Trans Autom Control 37:729–740

    Article  MathSciNet  MATH  Google Scholar 

  25. Hovakimyan N (2016) \({\cal{L}}1\) adaptive control tutorials. http://naira-hovakimyan.mechse.illinois.edu/l1-adaptive-control-tutorials/. Accessed 20 August 2016

  26. Schaff F, Bachmann A, Zens A, Zaeh MF, Pfeiffer F, Herzen J (2017) Grating-based X-ray dark-field computed tomography for the characterization of friction stir welds: a feasibility study. Mater Charact 129:143–148. https://doi.org/10.1016/j.matchar.2017.04.023

    Article  Google Scholar 

  27. Voellner G (2010) Ruehrreibschweissen mit Schwerlast–Industrierobotern (’Friction Stir Welding with Industrial Robots’). Dissertation, Technical University of Munich

Download references

Acknowledgements

The authors would like to thank the Deutsche Forschungsgemeinschaft (DFG) for funding the project “Temperature Control in FSW” and the iwb e.V. for the financial support to acquire the required real time system. Additional gratitude is given to to Jakob Gamper and Giacomo Costanzi who assisted during the experiments.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to A. Bachmann.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Bachmann, A., Roehler, M., Pieczona, S.J. et al. Torque-based adaptive temperature control in friction stir welding: a feasibility study. Prod. Eng. Res. Devel. 12, 391–403 (2018). https://doi.org/10.1007/s11740-018-0798-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11740-018-0798-z

Keywords

Navigation