Skip to main content
Log in

Supersonic flow over circular protuberances on a flat plate

  • Regular Paper
  • Published:
Journal of Visualization Aims and scope Submit manuscript

Abstract

The nanotracer planar laser scattering (NPLS) technique is used to test the flow field of Mach 3.0 supersonic flow over circular protuberances. The protuberance heights (H) are 1, 2, and 4 mm, and the diameters (D) are all 4 mm with the Reynolds number of 7.7 × 106/m, while the thickness of the laminar boundary layer (δ) is about 1.2 mm at the mounting position, corresponding to H/δ values of 0.83, 1.67 and 3.33. The fine structures in the symmetrical plane of the flow field around the cylinders are imaged. In the NPLS images, expansion wave, three-dimensional bow-detached shock wave, reattachment shock wave and separation region ahead of the cylinders are clearly visualized. The spatial and temporal evolution characteristics of the vortex structures are analyzed. Special attention is paid to the study of the wake flow and the influence of the height of the protuberances on the wake flow, showing that vortices in the wake flow of the 1-mm high cylinder are isolated and simple, while to the 4-mm high cylinder are complex and mixed-up with less periodicity. After reattachment, the lower cylinder has a relatively longer laminar section as well as transition section. Fractal analysis is done on the wake flow, indicating that higher protuberances tend to have a larger fractal dimension and increasing slope. Based on the average fractal dimension of 50 NPLS images, the 2- and 4-mm cylinders have a close value while the 1-mm cylinder which is submerged in the boundary layer has a much smaller fractal dimension. Streamwise pressure distributions are measured both upstream and downstream, and the results show that the influence extent tends to depend little on the height of the cylinder. While the H/D values only influence on the size of the plateau region and the pressure increasing slope.

Graphical Abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16

Similar content being viewed by others

Abbreviations

H :

Height of the circular protuberance

D :

Diameter of the circular protuberance

∆:

Separation distance ahead of the circular protuberance

δ :

Thickness of the laminar boundary layer with the circular protuberance removed

AR :

Height to diameter ratio H/D

htp:

Height of the triple point

References

  • Ajay K, Salast MD (1985) Euler and Navier–Stokes solutions for supersonic shear flow past a circular cylinder. AIAA J 23(4):583–587

    Article  Google Scholar 

  • Bashkin VA, Egorov IV, Egorova MV (1993) Supersonic viscous perfect gas flow past a circular cylinder. Fluid Dyn 28:833–838

    Article  MATH  Google Scholar 

  • Bashkin VA, Egorov IV, Egorova MV (2001) Supersonic flow past a circular cylinder with an isothermal surface. Fluid Dyn 36:147–153

    Article  MATH  Google Scholar 

  • Burbank PB, Newlander RA, Collins IK (1962) Heat-transfer and pressure measurements on a flat-plate surface and heat-transfer measurements on attached protuberances in a supersonic turbulent boundary layer at Mach numbers of 2.65, 3.51, and 4.44. NASA TN D-1372

  • Dolling DS, Bogdonoff SM (1981) Scaling of interactions of cylinders with supersonic turbulent boundary layers. AIAA-81-4110

  • Falconer K (2003) Fractal geometry, 2nd edn. Wiley, Chichester

    Book  MATH  Google Scholar 

  • He L, Yi SH, Zhao YX (2011) Visualization of coherent structures in a supersonic flat-plate boundary layer. Chin Sci Bull 56:489–494

    Article  Google Scholar 

  • Humble RA, Peltier SJ, Bowersox RDW (2012) Visualization of the structural response of a hypersonic turbulent boundary layer to convex curvature. Phys Fluids 106103:1–24

    Google Scholar 

  • Li SX (2007) Complex flow with the leading of shock wave and boundary layer. Science Press, Beijing, pp 1–10 (in Chinese)

    Google Scholar 

  • Ma HD, Li SX (2000) A study on characters of hypersonic plate/cylinder juncture flow. J Astronaut 21(1):1–5 (in Chinese)

    Google Scholar 

  • Man SY, Jiwoon S, Ju CB (2012) Heat transfer by shock-wave/boundary layer interaction on a flat surface with a mounted cylinder. Int J Heat Mass Transf 55:1764–1772

    Article  Google Scholar 

  • Manokaran K, Vidya G, Goyal VK (2003) CFD simulation of flow field over a large protuberance on a flat plate at high supersonic mach number. In: 41st aerospace sciences meeting and exhibit, Reno, Nevada. AIAA 2003-1253

  • Murphree ZR, Jagodzinski J, Hood ES, Clemens NT (2006) Experimental studies of transitional boundary layer shock wave interactions. In: 44th AIAA aerospace sciences meeting and exhibit, Reno, Nevada. AIAA 2006-326

  • Ozcan O, Bulent KY (1991) Cylinder-induced shock-wave boundary-layer interaction. AIAA J 30(4):1130–1132

    Article  Google Scholar 

  • Ozcan O, Holt M (1984) Supersonic separated flow past a cylindrical obstacle on a flat plate. AIAA J 22(5):611–617

    Article  Google Scholar 

  • Paul JW, Douglas GH, Joseph AS (1968) Flow field in the vicinity of cylindrical protuberances on a flat plate in supersonic flow. J SPACECRAFT 5(1):127–128

    Article  Google Scholar 

  • Schrijer FFJ, Scarano F, Oudheusden BW (2006) Application of PIV in a Mach 7 double-ramp flow. Exp Fluids 41:353–363

    Article  Google Scholar 

  • Sedney R (1973) A survey of the effects of small protuberances on boundary-layer flows. AIAA J 11:782–792

    Article  Google Scholar 

  • Sedney R, Kitchens CW (1977) Separation ahead of protuberances in supersonic turbulent boundary layers. AIAA J 15:546–552

    Article  Google Scholar 

  • Voitenko DM, Zubkov AI, Panov YA (1966) Supersonic gas flow past a cylindrical obstacle on a plate. Fluid Dyn 1:121–125

    Google Scholar 

  • Wang DP, Zhao YX, Xia ZX (2012) Experimental investigation of supersonic flow over a hemisphere. Chin Sci Bull 57:1765–1771

    Article  Google Scholar 

  • Westkaemper JC (1967) Turbulent boundary-layer separation ahead of cylinders. AIAA J 6(7):1352–1355

    Article  Google Scholar 

  • Wheaton BM, Bartkowicz MD et al (2011) Roughness induced instabilities at Mach 6: a combined numerical and experimental study. AIAA 2011-3248

  • White JT (1995) A Navier–Stokes CFD analysis of the flow field about a circular-cylinder protuberance mounted perpendicular to a flat plate in supersonic flow. AIAA-95-1789-CP

  • Zhao YX (2008) Experimental investigation of spatiotemporal structures of supersonic mixing layer. Ph.D. thesis. National University of Defense Technology, Changsha, China (in Chinese)

  • Zhao YX, Yi SH, He L, Cheng ZY (2010) Density field measurement and approximate reconstruction of supersonic mixing layer. Chin Sci Bull 55:2004–2009

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Dun-dian Gang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Gang, Dd., Yi, Sh., Wu, Y. et al. Supersonic flow over circular protuberances on a flat plate. J Vis 17, 307–317 (2014). https://doi.org/10.1007/s12650-014-0209-2

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12650-014-0209-2

Keywords

Navigation