Abstract
This paper presents an analysis of the main operating conditions that may lead to inappropriate differential relay operation. The specific numerical differential relay is established in the SIEMENS laboratory of the “Institut de Formation en Electricité et Gaz (IFEG) Ain Mlila”. The procedures of setting and testing, in particular, the SIEMENS 7UT613 numerical relay are described. In this regard, several tests are applied to verify their characteristics then the setting parameters are calculated and loaded to the numerical relays, using the DIGSI 4.87. In addition to this, the relays secondary tests are conducted using the OMICRON CMC 356 of the OMICRON electronic GmbH Company where the results are used to verify the exact operating characteristics of their protection elements.
Similar content being viewed by others
References
Aktaibi A, Rahman MA (2012) Digital differential protection of power transformer using Matlab, MATLAB—A fundamental tool for scientific computing and engineering applications—vol 1, InTech
Bouderbala R, Bentarzi H, Ouadi A (2011) Digital differential relay reliability enhancement of power transformer. Int J Circuits Syst Signal Process. 5(3):263–270
Bouderbala R, Bentarzi H, Abderrahmane O (2010) A New approach Applied to Digital Differential Protection for a Large Power Transformer. In: The 9th WSEAS international conference on Circuits, Systems, Electronics, Control & Signal Processing, Athena, Greece
Dris O, Elmareimi FM, Fouad R (2007) Transformer Differential Protection Scheme with Internal Faults Detection Algorithm Using Second Harmonics Restrain and Fifth Harmonics Blocking Logic. In: The 5th International Conference on Electrical and Electronics Engineering. Bursa, Turkey
Hamouda AH, Al-Anzi FQ, Gad HK, Gastli A (2013) Numerical Differential protection algorithm for power transformers. In: 7th IEEE GCC Conference and Exhibition, Doha, Qatar
Manual Version: Expl_TDiffProt.ENU.1—Year 2013© OMICRON electronics
Papaspiliotopoulos VA, Karalexis DE, Korres GN (2014) Description, setting and secondary testing of a digital protective relaying system. In: 12th IET international conference on developments in power system protection DPSP, Copenhagen, Denmark
Perez SGA (2006) Modeling relays for power system protection studies. Phd Thesis, University of Saskatchewan, Saskatoon Saskatchewan, Canada
SIPROTEC Differential Protection 7UT612 V4.0 Manual Copyright © SIEMENS AG 2002
Thompson MJ (2011) Percentage restrained differential, percentage of what? In: 64th annual conference for protective relay engineers, College Station, TX, USA
Verney LH, Rolim JG (2012) Assessment of transformer relay algorithms and settings in laboratory using transient simulation data. In: 11th international conference on developments in power systems protection DPSP, Birmingham, UK
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bouchahdane, M., Soltani, N. & Lamraoui, F. Maintenance testing of numerical differential protection relay. Int J Syst Assur Eng Manag 7 (Suppl 1), 274–281 (2016). https://doi.org/10.1007/s13198-015-0395-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13198-015-0395-x