Abstract
Efficacious product development is a critical issue faced by medical device manufacturing industries. Indian medical device industry is in nascent stage constituting of 75 % imports indicating diminutive device development activities unlike other sectors of manufacturing which are vigorously making forays through indigenous product development. The objective of this paper is to identify barriers to medical device development (MDD) and develop a structural model of it. 11 most significant barriers are identified using opinions of MDD experts and the literature review. They are further ranked by 33 experts through questionnaire survey. The mutual relationships among the barriers are established based on opinions of one group of experts using interpretive structural modelling (ISM) approach. The barriers are quantified using reachability matrix and further categorised as: autonomous, dependent, linkage and driver barriers using MICMAC analysis based on the mutual influence and dependence. The model is further validated by another group of MDD experts. Combination of ISM and MICMAC analysis gives a high level contextual relationship among the barriers identified. The barriers have compounding effect. Dependent barriers have higher dependence and present resulting actions. The driver barriers have high driving power and low dependence indicating need for systematic plan of action. Identification of barriers to MDD and developing the contextual relationships among them is a unique effort. It will provide an aid to the top management, developers and policy makers to develop strategies for MDD. Moreover, it will assist to accelerate indigenous contribution towards MDD which will ultimately deepen the penetration of low cost and better quality medical care for larger part of the population. This paper develops a model of barriers to MDD in India; which can be customised for other sectors and contexts.
Similar content being viewed by others
References
Aguwa CC, Monplaisir L, Achuthamenon P, Muni SRK (2010) Integrated fuzzy-based modular architecture for medical device design and development. J Med Dev 4:031007
Aguwa CC, Monplaisire L, Sylajakumari PA (2012) Rules modification on a fuzzy based modular architecture for medical device design and development. IIE Trans Healthcare Syst Eng 2(1):50–61
Alawamleh M, Popplewell K (2011) Interpretive structural modelling of risk sources in a virtual organisation. Int J Prod Res 49(20):6041–6063
Attri R, Grover S (2015) Modelling the quality enabled factors of facility layout design stage of production system life cycle. Int J Syst Assur Eng Manag. doi:10.1007/s13198-015-0386-y
Attri R, Grover S, Dev N, Kumar D (2013a) An ISM approach for modelling the enablers in the implementation of total productive maintenance (TPM). Int J Syst Assur Eng Manag 4(4):313–326
Attri R, Grover S, Dev N, Kumar D (2013b) Analysis of barriers of total productive maintenance (TPM). Int J Syst Assur Eng Manag 4(4):365–377
Attri R, Grover S, Dev N (2014) A graph theoretic approach to evaluate the intensity of barriers in the implementation of total productive maintenance (TPM). Int J Prod Res 52(10):3032–3051
Borade A, Bansod S (2012) Interpretive structural modelling—based framework for VMI adoption in Indian industries. Int J Adv Manuf Technol 58(9–12):1227–1242
Chang AY, Hu KJ, Hong YL (2013) An ISM-ANP approach to identifying key agile factors in launching a new product into mass production. Int J Prod Res 51(2):582–597
Chilukuri S, Gordon M, Musso C, Ramaswamy S (2010) Design to value in medical devices. Mckinsey and Company, NewYork
CII (Confederation of Indian Industry)—Deloitte (2010) Medical technology industry in India: riding the growth curve
Ciurana J (2014) Designing, prototyping and manufacturing medical devices: an overview. Int J Comput Integr Manuf 27(10):901–918
Datta P, Mukhopadhyay L, Selvaraj S (2013) Medical devices manufacturing industry in India: market structure, import intensity and regulatory mechanisms. Institute for Studies in Industrial Development (ISID)—Public Health Foundation of India (PHFI) Collaborative Research Programme, Working Paper Series 02
Davey SM, Brennan M, Meenan BJ, McAdam R (2011) Innovation in the medical device sector: an open business model approach for high-tech small firms. Technol Anal Strateg Manag 23(8):807–824
Diabat A, Govindan K, Panicker VV (2012) Supply chain risk management and its mitigation in a food industry. Int J Prod Res 50(11):3039–3050
Digalwar AK, Giridhar G (2015) Interpretive structural modeling approach for development of electric vehicle market in India. Proc CIRP 26:40–45
Eatock J, Dixon D, Young T (2009) An exploratory survey of current practice in the medical device industry. J Manuf Tech Manag 20(2):218–234
Faisal MN, Banwet DK, Shankar R (2006) Supply chain risk mitigation: modelling the enablers. Bus Process Manag J 12(4):535–552
Faisal MN, Banwet DK, Shankar R (2007) Information risks management in supply chains: an assessment andmitigation framework. J Enterp Inf Manag 20(6):677–699
FDA (United States Food and Drugs Association) (2011) Understanding barriers to medical device quality
Fennelly D, Cormican K (2006) Value chain migration from production to product centered operations: an analysis of the Irish medical device industry. Technovation 26(1):86–94
FICCI (Federation on Indian chamber of commerce and industries): Medical device and equipments sector profile document. http://www.ficci.com/sector/76/Project_docs/Medical_Devices_and_Equipment_Sector_profile.pdfAbbrevation TOI: The Times of India (Indian daily)
Gothwal S, Raj T (2015) Analyzing the factors affecting the flexibility in FMS using weighted interpretive structural modeling (WISM) approach. DOI, Int J Syst Assur Eng Manag. doi:10.1007/s13198-016-0443-1
IICII (Indo_ Italian chamber of commerce and industries) Short market overviews (2008) The healthcare industry in India
Jadhav JR, Mantha SS, Rane SB (2014) Development of framework for sustainable Lean implementation: an ISM approach. J Ind Eng Int 10:72
Jain V, Raj T (2015) Modeling and analysis of FMS flexibility factors by TISM and fuzzy MICMAC. Int J Syst Assur Eng Manag 6(3):350–371
Jarosławski S, Saberwal G (2013) Case studies of innovative medical device companies from India: barriers and enablers to development. BMC Health Serv Res 13(199):1–8
Kamal R, Kurihara C, Mairal A (2013) Barriers to commercialization of novel medical technologies in India. IEEE LifeSci Newslett. http://lifesciences.ieee.org/publications/newsletter/january-2013/258-barriers-to-commercialization-of-novel-medical-technologies-in-india
Kannan G, Haq NA (2007) Analysis of interactions of criteria and sub-criteria for the selection of supplier in the built-in-order supply chain environment. Int J Prod Res 45(17):3831–3852
Krishnan KV (2011) Bright prospects for medical devices industry. http://www.pharmabiz.com/PrintArticle.aspx?aid=63097&sid=9
Kumar S, Sharma RK (2015) An ISM based framework for structural relationship among various manufacturing flexibility dimensions. Int J Syst Assur Eng Manag 6(4):511–521
Kumar P, Singh RK, Kumar R (2015) An integrated framework of interpretive structural modeling and graph theory matrix approach to fix the agility index of an automobile manufacturing organization. Int J Syst Assur Eng Manag. doi:10.1007/s13198-015-0350-x
Kuo TC, Ma HY, Huang SH, Hu AH, Huang CS (2010) Barrier analysis for product service system using interpretive structural model. Int J Adv Manuf Technol 49:407–417
Linehan JH, Chaney A (2010) Academic/industry challenges for medical device development. Sci Transl Med 2(63):63mr6
Lucke LE, Mickelson A, Anderson D (2009) Proving experience speeds medical device time to market. 31st annual international conference of the IEEE EMBS, Minneapolis, Minnesota, USA, September 2–6
Malhotra MK, Grover V (1998) An assessment of survey research in POM: from constructs to theory. J Oper Manag 16(4):407–425
Malkin RA (2007) Barriers for medical devices for the developing world. Expert Rev Med Dev 4(6):759–763
Mandal A, Deshmukh SG (1994) Vendor selection using interpretive structural modeling (ISM). Int J Oper Prod Manag 14(6):52–59
Martin JL, Clark DJ, Morgan SP, Crowe JA, Murphy E (2012) A user centred approach to requirements elicitation in medical device development: a case study from an industry perspective. Appl Ergon 43(1):184–190
Mathiyazhagan K, Govindan K, NoorulHaq A, Geng Y (2013) An ISM approach for the barrier analysis in implementing green supply chain management. J Clean Prod 47:283–297
MDI2 (Medical Devices Innovation Institute) in consultation with national stakeholders (2011) medical devices challenges and opportunities for enhancing the health and wealth of Canadians. http://www.medec.org/webfm_send/1419
Mol BAD (2014) Regulation of risk management of medical devices and the role of litigation. J Risk Res 17(6):735–748
Numata S, Oguchi S, Yamamoto Y, Imura H, Kawakami K (2010) Medical device development in crisis: a movement for technology innovation in health and medicine in Japan. Innov Manag Policy Pract 12(3):330–336
Panahifar F, Byrne PJ, Heavey C (2014) ISM analysis of CPRF implementation barriers. Int J Prod Res 52(18):5255–5272
Rabas PL, Djanatliev KA, Wahlster P et al (2015) Technology foresight for medical device development through hybrid simulation: the Pro HTA project. Technol Forecast Soc Chang 97:105–114
Rao GSU (2013) Made in India: How’s that for an indigenous medical device? Indian J Neurosurg 2(2):151–153
Ravi V, Shankar R (2005) Analysis of interactions among the barriers of reverse logistics. Technol Forecast Soc Change 72(8):1011–1029
Rochford L, Rudelius W (1997) New product development process: stages and successes in the medical products industry. Ind Market Manag 26:67–84
Sindhwani R, Malhotra V (2016) Modelling and analysis of agile manufacturing system by ISM and MICMAC analysis. Int J Syst Assur Eng Manag. doi:10.1007/s13198-016-0426-2
Singh S, Kumar R, Kumar U (2015) Modelling factors affecting human operator failure probability in railway maintenance tasks: an ISM-based analysis. Int J Syst Assur Eng Manag 6(2):129–138
Speer JD (2007) Report: medical device barriers to entry for start-Ups, entrepreneurs, and suppliers. Creo Quality, LLC. http://www.creoquality.com/wp-content/uploads/2007/08/medical-device-barriers-to-entry-report-070820.pdf
Talib F, Rahman Z, Qureshi MN (2011) Analysis of interaction among the barriers to total quality management implementation using interpretive structural modelling approach. Benchmark Int J 18(4):563–587
Walters A, Thomas N, Brown R (2001) Barriers to effective product development within SMEs in the medical manufacturing sector. Manufacturing information systems. In: Proceedings of the fourth SMESME international conference, Alborg University, Denmark, 14th–16th May, ISBN 87-89867-81, 113–119
Warfield JW (1974) Developing interconnected matrices in structural modelling. IEEE Trans Syst Manag Cyber 4(1):51–81
Acknowledgments
This work was supported by All India Council for Technical Education (AICTE) under grant Ref No. 20/AICTE/RIFD/RPS (POLICY-1) 61/2013–14. The authors are grateful to the concerned authorities and the MDD experts who contributed to this study. Authors are sincerely thankful to the reviewers for their valuable suggestions which helped to improve quality of this paper.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Rane, S.B., Kirkire, M.S. Analysis of barriers to medical device development in India: an interpretive structural modelling approach. Int J Syst Assur Eng Manag 7, 356–369 (2016). https://doi.org/10.1007/s13198-016-0497-0
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13198-016-0497-0