Skip to main content

Advertisement

Springer Nature Link
Log in

Automatic Hitting-Duration Estimation of a Rechargeable Impact Wrench Using a Fuzzy Neural Network to Reach Target Toques

  • Published:
International Journal of Fuzzy Systems Aims and scope Submit manuscript

Abstract

This paper proposes an automatic hitting-duration estimation method for a rechargeable impact wrench using a fuzzy neural network (FNN) to reach target torques. To manipulate a commercial rechargeable impact wrench to output a proper torque for a fastener and battery specification, an operator must determine the corresponding hitting duration based on experiences and experimental trials. Nevertheless, the determined hitting duration is fixed and cannot adapt to changes in battery voltage outputs affected by several factors, such as battery capacity and degradation, which leads to poor torque regulation. This paper addresses this problem by applying an FNN to estimate proper hitting durations to achieve target torques under different battery conditions. Without additional embedding of torque feedback sensors on the impact wrench, this paper feeds four easily available states as inputs to the FNN, including motor revolutions per minute, motor current, battery voltage, and target torque. Supervised input–output data are collected to train the FNN to estimate the optimal hitting durations for target torque regulation. The FNN-based hitting-duration estimation method is implemented in a microcontroller unit to control a real rechargeable impact wrench with different power sources. Experimental results show that proper hitting durations are estimated by the FNN under different battery conditions to control the rechargeable impact wrench to achieve different target torques.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

Explore related subjects

Discover the latest articles and news from researchers in related subjects, suggested using machine learning.

References

  1. Wallace, P.: Energy, torque, and dynamics in impact wrench tightening. J. Manuf. Sci. Eng. 137(2), 1–8 (2015)

    Article  Google Scholar 

  2. Zhou, J., Dai, S., Song, C., Zhang, A.: Development of an air impact wrench in a network-centric environment. In: Proceedings of 8th International Conference on Computer Supported Cooperative Work in Design, Xiamen, China, pp. 647–650 (2004)

  3. Lee, J., Ko, D., Chun, H., Hur, D.: Control strategies for manipulating contact force of impact wrench to generate high level torque. In: Proceedings of 13th International Conference on Control, Automation and Systems, Gwangju, South Korea, pp. 1758–1765 (2013)

  4. He, C., Wu, T.: Design, analysis and experiment of a permanent magnet brushless DC motor for electric impact wrench. In: Proceedings of International Conference on Electrical Machines, pp. 1591–1597 (2016)

  5. Greenslade, J.: Impact wrenches are a bolt supplier’s worst enemy. Am. Fasten. J. 13(4), 29–30 (1996)

    Google Scholar 

  6. Jia, Z., Bhatia, A., Aronson, R.M., Bourne, D., Mason, M.T.: A survey of automated threaded fastening. IEEE Trans. Autom. Sci. Eng. 16(1), 298–310 (2019)

    Article  Google Scholar 

  7. Deters, C., Lam, H.K., Secco, E.L., Würdemann, H.A., Seneviratne, L.D., Althoefer, K.: Accurate bolt tightening using model-free fuzzy control for wind turbine hub bearing assembly. IEEE Trans. Control Syst. Technol. 23(1), 1–12 (2015)

    Article  Google Scholar 

  8. Liu, S., Ge, S.S., Tang, Z.: A modular designed bolt tightening shaft based on adaptive fuzzy backstepping control. Int. J. Control Autom. Syst. 14, 924–938 (2016)

    Article  Google Scholar 

  9. Wu, Z., Zhang, G., Du, W., Wang, J., Han, F., Qian, D.: Torque control of bolt tightening process through adaptive-gain second-order sliding mode. Meas. Control 53(1), 1–13 (2020)

    Google Scholar 

  10. Miao, R., Shen, R., Zhang, S., Xue, S.: A review of bolt tightening force measurement and loosening detection. Sensors 20(11), 1–18 (2020)

    Article  Google Scholar 

  11. Lee, J., Ko, D.S., Chun, H.H., Hur, D.J.: On the study of methodology of dynamic analysis for systematic designing impact wrench. In: Korea Society for Noise and Vibration Engineering, pp. 373–378 (2013)

  12. Zhang, S., Tang, J.: System-level modeling and parametric identification of electric impact wrench. J. Manuf. Sci. Eng. 138, 1–16 (2016)

    Article  Google Scholar 

  13. Drozdov, A.: Theoretical and empirical methods of estimating energy and force characteristics of impact wrenches. In: Proceedings of XXII International Science on Conference and Construction—The Formation of Living Environment, Uzbekistan, pp. 1–5 (2019)

  14. Wettstein, A., Grauberger, P., Matthiesen, S.: Modeling dynamic mechanical system behavior using sequence modeling of embodiment function relations: case study on a hammer mechanism. Appl. Sci. 128, 1–17 (2021)

    Google Scholar 

  15. Noda, H.: Bolt-tightening method using an impact wrench. U.S. Patent No.05457866 (1995)

  16. Fujinaka, T., Nakano, H., Omatu, S.: Bolt tightening control using neural networks. In: Proceedings of IEEE International Conference on Systems, Man and Cybernetics: e-Systems and e-Man for Cybernetics in Cyberspace, Tucson, AZ, USA, pp. 1390–1395 (2001)

  17. Reilly, W.T.: Portable pneumatic impact wrench testing machine. U.S. Patent No. 08806961 (2014)

  18. Woetzl, C., Bralla, D., Alberding, M.: Control method for an impact wrench. WIPO Patent No. 2017174415 (2017)

  19. Grzejda, R., Parus, A.: Experimental studies of the process of tightening an asymmetric multi-bolted connection. IEEE Access 9, 47372–47379 (2021)

    Article  Google Scholar 

  20. Ronald, L.: Method and apparatus for determining and adjusting torque in an electric impact torque wrench. U.S. Patent No. 05963707 (1999)

  21. Alberding, M., Bralla, D., Orvieto, A.: Setting method for screw connections using an impact screwdriver. WIPO Patent No. 2019122189 (2019)

  22. Juang, C.F., Chen, T.C., Cheng, W.Y.: Speedup of implementing fuzzy neural networks with high-dimensional inputs through parallel processing on graphic processing units. IEEE Trans. Fuzzy Syst. 19(4), 717–728 (2011)

    Article  Google Scholar 

  23. Wu, M.F., Huang, W.C., Juang, C.F., Chang, K.M., Wen, C.Y., Chen, Y.H., Lin, C.Y., Chen, Y.C., Lin, C.C.: A new method for self-estimation of the severity of obstructive sleep apnea using easily available measurements and neural fuzzy evaluation system. IEEE J. Biomed. Health Inform. 21(6), 1524–1532 (2017)

    Article  Google Scholar 

  24. de Souza, P.V.C.: Fuzzy neural networks and neuro-fuzzy networks: a review the main techniques and applications used in the literature. Appl. Soft Comput. 92, 1–26 (2020)

    Google Scholar 

  25. Juang, C.F., Bui, T.B.: Reinforcement neural fuzzy surrogate-assisted multiobjective evolutionary fuzzy systems with robot learning control application. IEEE Trans. Fuzzy Syst. 28(3), 434–446 (2020)

    Article  Google Scholar 

  26. Naderkhani, R., Behzad, M.H., Razzaghnia, T., et al.: Fuzzy regression analysis based on fuzzy neural networks using trapezoidal data. Int. J. Fuzzy Syst. 23, 1267–1280 (2021)

    Article  Google Scholar 

  27. Juang, C.F., Chang, C.W., Hung, T.H.: Hand palm tracking in monocular images by fuzzy rule-based fusion of explainable fuzzy features with robot imitation application. IEEE Trans. Fuzzy Syst. 29(12), 3594–3606 (2021)

    Article  Google Scholar 

  28. Duan, L., Shi, M., Huang, C., et al.: New results on finite-time synchronization of delayed fuzzy neural networks with inertial effects. Int. J. Fuzzy Syst. 24, 676–685 (2022)

    Article  Google Scholar 

  29. Juang, C.F., Pan, G.R., Wen, C.Y., Chang, K.M., Wu, M.F., Huang, W.C.: A fuzzy neural network model for rapid prediction of optimal positive airway pressures in OSAS patients. IEEE J. Biomed. Health Inform. 26(4), 1506–1515 (2022)

    Article  Google Scholar 

  30. Lee, C.S., Tsai, Y.L., Wang, M.H., et al.: Adaptive fuzzy neural agent for human and machine co-learning. Int. J. Fuzzy Syst. 24, 778–798 (2022)

    Article  Google Scholar 

  31. AbuHassan, A., Alshayeb, M., Ghouti, L.: Detection of design smells using adaptive neuro-fuzzy approaches. Int. J. Fuzzy Syst. 24, 1927–1943 (2022)

    Article  Google Scholar 

  32. Ilieş, A.I., Chindriş, G., Pitică, D.: A comparison between state of charge estimation methods: extended Kalman filter and unscented Kalman filter. In: Proceedings of IEEE 26th International Symposium for Design and Technology in Electronic Packaging, Pitesti, Romania, pp. 376–381 (2020)

  33. Kong, X., Zhang, X., Bai, L.: A remote estimation method of smart meter errors based on neural network filter and generalized damping recursive least square. IEEE Trans. Ind. Inform. 18(1), 219–230 (2022)

    Article  Google Scholar 

Download references

Acknowledgements

This work was supported by the Ministry of Science and Technology, Taiwan, under Grant MOST 110-2221-E-005-082-MY2.

Author information

Authors and Affiliations

  1. Department of Electrical Engineering, National Chung Hsing University, Taichung, 402, Taiwan, ROC

    Chia-Feng Juang & Yi-Wei Chen

Authors
  1. Chia-Feng Juang
    View author publications

    You can also search for this author inPubMed Google Scholar

  2. Yi-Wei Chen
    View author publications

    You can also search for this author inPubMed Google Scholar

Corresponding author

Correspondence to Chia-Feng Juang.

Rights and permissions

Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Juang, CF., Chen, YW. Automatic Hitting-Duration Estimation of a Rechargeable Impact Wrench Using a Fuzzy Neural Network to Reach Target Toques. Int. J. Fuzzy Syst. 25, 29–41 (2023). https://doi.org/10.1007/s40815-022-01387-9

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40815-022-01387-9

Keywords