Abstract
This research focuses on a long-standing, yet critical problem in the erection of steel structures. In the current state of practice, steel workers must stand on an unfinished structure to assist with the assembly of structural elements manually. They must pull on the wire hanging under the rigging elements to align the bolting holes of the moving and fixed elements. This work is often performed in high places, which can be very risky. Therefore, we have developed a robotic assembly system (RAS) for steel beam erection and assembly to prevent workers from having to work in a high place. The RAS consists of four methods: rotation, alignment, bolting, and unloading. The rotation method involves a flywheel installed on top of the rigging beam, which aims to rotate the beam to the assembly angle. The alignment method includes both vertical and horizontal alignment. The vertical alignment relies on a camera and a marker on the column to align the beam altitude. The horizontal alignment relies on a specially-designed beam, which allows for it to be smoothly guided into the right position. The bolting method is used to connect the beam to a fixed element. We designed an additional guide hole above each bolt hole. The bolt can be inserted in the guide hole and slid to the bolt hole. The unloading method is used to unload the crane cable and the RAS. We use a pin mechanism for the beam-hook connection so it can easily be unplugged by a motor. The system is built in a scaled experimental construction site to validate its feasibility. The results show that the RAS can operate the assembly process without humans working at risky heights, and can complete faster than the traditional method. In conclusion, we have developed a robotics assembly system that can help reduce the frequency of accidental falls during the steel beam assembly process. The RAS adheres to the process of the current erection method and can be broadly introduced to existing construction sites.
Similar content being viewed by others
References
Beavers, J.E., Moore, J.R., Schriver, W.R.: Steel erection fatalities in the construction industry. J. Constr. Eng. Manag. 135(3), 227–234 (2009)
Bijlaard, F.S.K., Coelho, A.M.G.O., Magalhães, V.J.D.A.: Innovative joints in steel construction. Steel Constr. 2(4), 243–247 (2009)
Bock, T., Linner, T.: Construction robots: elementary technologies and single-task construction robots. Cambridge University Press (2016a)
Bock, T., Linner, T.: Site automation: automated/robotic on-site factories. Cambridge University Press (2016b)
Brown, M.: Advanced digital photography. Media Publishing Pvt, Limited, Australia (2004)
CM Lab: Vortex Master. http://www.cm-labs.com/market/construction/products/vortex-master (2015). Accessed 10 Apr 2017
Chang, Y.-C., Hung, W.-H., Kang, S.-C.: A fast path planning method for single and dual crane erections. Autom. Constr. 22, 468–480 (2012)
Cheng, T., Teizer, J.: Modeling tower crane operator visibility to minimize the risk of limited situational awareness. J. Comput. Civ. Eng. 28(3), 04014004 (2014)
Chi, H.-L., Chen, Y.-C., Kang, S.-C., Hsieh, S.-H.: Development of user interface for tele-operated cranes. Adv. Eng. Inf. 26(3), 641–652 (2012)
Chi, H.-L., Kang, S.-C.: A physics-based simulation approach for cooperative erection activities. Autom. Constr. 19(6), 750–761 (2010)
Chin, S., Yoon, S., Kim, Y.-S., Ryu, J., Choi, C., Cho, C.-Y.: Realtime 4D CAD + RFID for project progress management. Construction Research Congress (CRC): broadening perspectives, San Diego, California. 331–340 (2005)
Chu, B., Jung, K., Lim, M.-T., Hong, D.: Robot-based construction automation: an application to steel beam assembly (Part I). Autom. Constr. 32, 46–61 (2013)
ConXtech: ConX system. http://www.conxtech.com/conx-system/ (2015). Accessed 10 Apr 2017
Feng, C., Kamat, V.R.: Plane registration leveraged by global constraints for context-aware AEC application. Aided Civ. Infrastruct. Eng. 28, 325–343 (2013)
Feng, C., Xiao, Y., Willette, A., McGee, W., Kamat, V.R.: Vision guided autonomous robotic assembly and as-built scanning on unstructured construction sites. Autom. Constr. 59, 128–138 (2015)
GHI Electronics LLC:.NET Gadgeteer. https://www.ghielectronics.com/catalog/category/265 (2014). Accessed 10 Apr 2017
Gajamohan, M., Merz, M., Thommen, I., D’Andrea, R.: The cubli: a cube that can jump up and balance. International Conference on Intelligent Robots and Systems, Vilamoura, Algarve, Portugal. pp. 3722–3727 (2012)
Gambao, E., Balaguer, C., Gebhart, F.: Robot assembly system for computer-integrated construction. Autom. Constr. 9(5–6), 479–487 (2000)
Gams, A., Zlajpah, L., Lenarcic, J.: Imitating human acceleration of a gyroscopic device. Robotica 25(04), 501–509 (2007)
Garg, A., Kamat, V.R.: Virtual prototyping for robotic fabrication of rebar cages in manufactured concrete construction. J. Archit. Eng. 20(1), 06013002 (2014)
Huang, J.-Y., Gau, C.-Y.: Modelling and designing a low-cost high-fidelity mobile crane simulator. Int. J. Hum.-Comput. St. 58(2), 151–176 (2003)
Hung, W.-H., Liu, C.-W., Liang, C.-J., Kang, S.-C.: Strategies to accelerate the computation of erection paths for construction cranes. Autom. Constr. 62, 1–13 (2016)
Irizarry, J.: Application of methods analysis to steel erection tasks: identification of factors affecting labor performance. Int. J. Constr. Manag. 11(4), 31–47 (2011)
Irizarry, J., Abraham, D.M.: Assessment of risk perception of ironworkers. J. Constr. Res. 7(1/2), 111–132 (2006)
Juang, J.R., Hung, W.H., Kang, S.C.: SimCrane 3D+: a crane simulator with kinesthetic and stereoscopic vision. Adv. Eng. Inf. 27(4), 506–518 (2013)
Jung, K., Chu, B., Hong, D.: Robot-based construction automation: an application to steel beam assembly (Part II). Autom. Constr. 32, 62–79 (2013a)
Jung, K., Chu, B., Park, S., Hong, D.: An implementation of a teleoperation system for robotic beam assembly in construction. Int. J. Precis. Eng. Manuf. 14(3), 351–358 (2013b)
Jung, K., Chu, B., Bae, K., Lee, Y., Hong, D., Park, S., Lim, M.-T.: Development of automation system for steel construction based on robotic crane. International Conference on Smart Manufacturing Application, Kintex, Gyeonggi-do, Korea. 486–489 (2008)
KUKA: KR 16 CR v2 technical data, KUKA Robotics Corporation (2005)
Kahane, B., Rosenfeld, Y.: Real-time “sense-and-act” operation for construction robots. Autom. Constr. 13(6), 751–764 (2004)
Kang, S.-C., Chi, H.-L., Miranda, E.: Three-dimensional simulation and visualization of crane assisted construction erection processes. J. Comput. Civ. Eng. 23(6), 363–371 (2009)
Kang, S.C., Miranda, E.: Planning and visualization for automated robotic crane erection processes in construction. Autom. Constr. 15(4), 398–414 (2006)
Kang, S.-C., Miranda, E.: Numerical methods to simulate and visualize detailed crane activities. Comput. Aided Civ Inf. 24(3), 169–185 (2009)
Kim, D.-W., An, S.-H., Cho, H., Jeong, J.-W., Lee, B.-H., Dohe, N.L., Kang, K.-I.: Development of conceptual model of construction factory for automated construction. Build. Environ. 44(8), 1634–1642 (2009)
Kim, K., Kim, M.: RFID-based location-sensing system for safety management. Pers. Ubiquit. Comput. 16(3), 235–243 (2012)
Kim, C.-W., Kim, T., Lee, U.-K., Cho, H., Kang, K.-I.: Advanced steel beam assembly approach for improving safety of structural steel workers. J. Constr. Eng. Manage. 142(4), 05015019 (2016)
Kuo, T.-Y., Kang, S.-C.: Control of fast crane operation. Autom. Constr. 42, 25–35 (2014)
LEGO: LEGO Mindstroms. http://www.lego.com/en-us/mindstorms/ (2014). Accessed 10 Apr 2017
Lee, G., Cho, J., Ham, S., Lee, T., Lee, G., Yun, S.-H., Yang, H.-J.: A BIM- and sensor-based tower crane navigation system for blind lifts. Autom. Constr. 26, 1–10 (2012a)
Lee, C., Lee, G.: Feasibility of beam erection with a motorized hook-block,”. Autom. Constr. 41, 25–32 (2014)
Lee, G., Lee, G., Lee, T.: Field applicability and feasibility of the automated non-powered multi-beam lifting system. Autom. Constr. 28, 26–35 (2012d)
Lee, H.-S., Lee, K.-P., Park, M., Baek, Y., Lee, S.: RFID-based real-time locating system for construction safety management. J. Comput. Civ. Eng. 26(3), 366–377 (2012b)
Lee, C., Lee, G., Park, S., Cho, J.: Analysis of field applicability of the rotation-controllable tower-crane hook block. Autom. Constr. 21, 81–88 (2012c)
Lei, Z., Taghaddos, H., Hermann, U., Al-Hussein, M.: A methodology for mobile crane lift path checking in heavy industrial projects. Autom. Constr. 31, 41–53 (2013)
Liang, C.-J., Kang, S.-C.: Development of a steel beam hauling system for automatic steel beam assembly. International Conference on Computing in Civil and Building Engineering (ICCCBE), Orlando, Florida. 1295–1302 (2014)
Lin, K.-C., Jhuang, S.-J., Lin, C.-H.: Study on seismic performance of steel shop-fabricated moment connections, National Center for Research on Earthquake Engineering (2013)
Mo, Y.-H., Kang, T.-K., Zhang, H.-Z., Hong, D.-H., Lim, M.-T.: Development of 3D camera-based robust bolt-hole detection system for bolting cabin. Autom. Constr. 44, 1–11 (2014)
Nam, H., Choi, W., Ryu, D., Lee, Y., Lee, S.-H., Ryu, B.: Design of a bolting robot for constructing steel structure. International Conference on Control, Automation and Systems, COEX, Seoul, Korea. 1946–1949 (2007)
National Instruments Corporation: LabVIEW system design software. http://www.ni.com/labview/ (2014). Accessed 10 Apr 2017
OMAX Corporation: OMAX 2652 JetMachining® Center. https://www.omax.com/omax-machine/2652 (2016). Accessed 10 Apr 2017
Olson, E.: AprilTag: a robust and flexible visual fiducial system. IEEE International Conference on Robotics and Automation (ICRA), Shanghai, China. (2011)
Park, M.-W., Brilakis, I.: Construction worker detection in video frames for initializing vision trackers. Autom. Constr. 28, 15–25 (2012)
Pavlovcic, L., Krajnc, A., Beg, D.: Cost function analysis in the structural optimization of steel frames. Struct. Multidiscip. O. 28(4), 286–295 (2004)
Peurifoy, R. L., Schexnayder, C. J., Shapira, A., Schmitt, R. L.: Construction planning, equipment, and methods, McGraw-Hill, New York (2011)
Pitsco Education: TETRIX®. http://www.tetrixrobotics.com/ (2014). Accessed 10 Apr 2017
Ray, S.J., Teizer, J.: Coarse head pose estimation of construction equipment operators to formulate dynamic blind spots. Adv. Eng. Inf. 26(1), 117–130 (2012)
Saidi, K.S., Bunch, R., Lytle, A. M., Proctor F.: Development of a real-time control system architecture for automated steel construction. 23th International Symposium on Automation and Robotics in Construction (ISARC), Tokyo, Japan, 412–417 (2006)
Teizer, J., Cheng, T., Fang, Y.: Location tracking and data visualization technology to advance construction ironworkers’ education and training in safety and productivity. Autom. Constr. 35, 53–68 (2013)
The Steel Construction Institute: Quicon® design guide to BS 5950-1. http://www.newsteelconstruction.com/wp/quicon-design-guide-to-bs-5950-1/ (2004). Accessed 10 Apr 2017
Vijay, V., Sen, R.N., Richardson, S.: Risk perception of structural steel erection workers in Malaysia—Ergonomic implications for occupational safety and health. International Symposium on Past, Present and Future Ergonomics, Occupational Safety and Health, Bali, Indonesia. pp. 100–105 (2006)
Viscomi, V.B., Michalerya, W.D., Lu, L.-W.: Automated construction in the ATLSS integrated building systems. Autom. Constr. 3(1), 35–43 (1994)
Volk, R., Stengel, J., Schultmann, F.: Building Information Modeling (BIM) for existing buildings—literature review and future needs. Autom. Constr. 38, 109–127 (2014)
Wakisaka, T., Furuya, N., Inoue, Y., Shiokawa, T.: Automated construction system for high-rise reinforced concrete buildings. Autom. Constr. 9(3), 229–250 (2000)
Wang, X., Zhang, Y.Y., Wu, D., Gao, S.D.: Collision-free path planning for mobile cranes based on ant colony algorithm. Key Eng. Mat. 467–469, 1108–1115 (2011)
Yoo, W.S., Lee, H.-J., Kim, D.-I., Kang, K.-I., Cho, H.: Genetic algorithm-based steel erection planning model for a construction automation system. Autom. Constr. 24, 30–39 (2012)
Yu, S.-N., Ryu, B.-G., Lim, S.-J., Kim, C.-J., Kang, M.-K., Han, C.-S.: Feasibility verification of brick-laying robot using manipulation trajectory and the laying pattern optimization. Autom. Constr. 18(5), 644–655 (2009)
Zhang, C., Hammad, A.: Improving lifting motion planning and re-planning of cranes with consideration for safety and efficiency. Adv. Eng. Inf. 26(2), 396–410 (2012)
Zhou, W., Whyte, J., Sacks, R.: Construction safety and digital design: a review. Autom. Constr. 22, 102–111 (2012)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liang, CJ., Kang, SC. & Lee, MH. RAS: a robotic assembly system for steel structure erection and assembly. Int J Intell Robot Appl 1, 459–476 (2017). https://doi.org/10.1007/s41315-017-0030-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41315-017-0030-x