Abstract
This paper presents a new fully differential second generation current controlled conveyor (FDCCCII) based on differential pair topology, which employs floating gate MOS transistors (FG-MOS). It uses floating gate MOSFETs at the input stage and has rail-to-rail structure which performs with both positive and negative signals. This circuit has tunable parasitic resistance at its input port. It operates with low supply voltage (±0.8 V), low power consumption (lower than 3 mW at current bias of 1 mA), and wide range parasitic resistance (R X ). This circuit has less MOSFET than the previous similar circuits and is suitable for integrated circuit design. To demonstrate the application of the proposed circuit, a fully differential current mode LC-ladder filter and a fully differential multifunction biquad filter are designed. Simulation results by HSPICE confirm validity of the proposed circuit and its application.
Similar content being viewed by others
References
U.E. Ayten, M. Sagbas, H. Sedef, Current mode leapfrog ladder filters using a new active block. AEÜ, Int. J. Electron. Commun. 64(6), 503–511 (2010)
R. Chaisricharoen, B. Chipipop, Novel CMOS second-generation current-controlled conveyor base on modified differential-pair input-stage, in 7th International Conference (ASIC 2007) (IEEE Press, New York, 2007), pp. 707–710
R. Chaisricharoen, B. Chipipop, B. Sirinaovakul, CMOS CCCII: Structures, characteristics, and considerations. AEÜ, Int. J. Electron. Commun. 64(6), 540–557 (2010)
B. Chipipop, R. Chaisricharoen, B. Sirinaovakul, A novel balanced differential-pair multi-output CMOS CCCII, in 3rd Conference on Industrial Electronics and Applications (ICIEA 2008) (IEEE Press, New York, 2008), pp. 351–356
W. Chiu, S.I. Liu, H.W. Tsao, J.J. Chen, CMOS differential difference current conveyors and their applications, in IEE Proc.-Circuits Devices Syts (1996), pp. 91–96
W. Chunhua, Z. Qiujing, Z. Yan, S. Zhixing, A new fully differential second generation current conveyor, in 7th International Conference (ASIC 2007) (IEEE Press, New York, 2007), pp. 514–517
W. Chunhua, L. Yang, Z. Qiujing, F. Yu, Systematic design of fully balanced differential current-mode multiple-loop feedback filters using CFBCCII. Radioengineering 19(1), 185 (2010)
A. De Marcellis, G. Ferri, N.C. Guerrini, G. Scotti, V. Stornelli, A. Trifiletti, A novel low-voltage low-power fully differential voltage and current gained CCII for floating impedance simulations. Microelectron. J. 40(1), 20–25 (2009)
A. Fabre, O. Saaid, F. Wiest, C. Boucheron, Current controlled bandpass filter based on translinear conveyors. Electron. Lett. 31(20), 1727–1728 (1995)
R. Fani, E. Farshidi, A New Fully Differential Second Generation Current Controlled Conveyor Using FG-MOS (IEEE Press, New York, 2012), pp. 17–20
G. Ferri, N.C. Guerrini, Low Voltage, Low Power CMOS Current Conveyors (Kluwer Academic, Boston, 2003)
A.C.J. Gal, Systematic implementation method of LC-ladder filters by Mo-CCCII circuits. Radio Engineering 19(1) (2010)
W. Jaikla, P. Silapan, M. Siripruchyanun, Low-component electronically controllable dual-mode universal biquad filter using DO-CCCIIs, in Communications and Information Technologies (ISCIT 2007) (IEEE Press, New York, 2007), pp. 213–217
W. Jaikla, M. Siripruchyanan, Dual-outputs current controlled differential voltage current conveyor and its applications, in International Symposium on communications and Information Technologies (IEEE Press, New York, 2006), pp. 340–343
A. Jiraseree-amornkun, W. Surakampontorn, Efficient implementation of tunable ladder filters using multi-output current controlled conveyors. AEÜ, Int. J. Electron. Commun. 62(1), 11–23 (2008)
F. Khateb, N. Khatib, J. Koton, Novel low-voltage ultra-low-power DVCC based on floating-gate folded cascode OTA. Microelectron. J. 42(8), 1010–1017 (2011)
F. Khateb, N. Khatib, D. Kubánek, Novel ultra-low-power class AB CCII+ based on floating-gate folded cascode OTA. Circuits Syst. Signal Process. 31(2), 447–464 (2012)
S.A. Mahmoud, New fully-differential CMOS second-generation current conveyer. ETRI J. 28(4), 495–501 (2006)
S.A. Mahmoud, Fully differential CMOS CCII based on differential difference transconductor. Analog Integr. Circuits Signal Process. 50(3), 195–203 (2007)
N. Pandey, S.K. Paul, S.B. Jain, A new electronically tunable current mode universal filter using MO-CCCII. Analog Integr. Circuits Signal Process. 58(2), 171–178 (2009)
B. Razavi, Design of CMOS Analog Integrated Circuits (McGraw-Hill, New York, 2001)
E. Rodriguez-Villegas, Low power and low voltage circuit design with the FGMOS transistor, vol. 20. Institution for Engineering and Technology (2006)
A. Sedra, K. Smith, A second-generation current conveyor and its applications. IEEE Trans. Circuit Theory 17(1), 132–134 (1970)
K. Smith, A. Sedra, The current conveyor—a new circuit building block. Proc. IEEE 56(8), 1368–1369 (1968)
F.J. Taylor, A.B. Williams, Electronic Filter Design Handbook (McGraw-Hill, New York, 1995)
S. Winder, Analog and digital filter design (Newnes, London, 2002)
Q. Zhang, C. Wang, J. Sun, S. Du, A new type of current conveyor and its application in fully balanced differential current-mode elliptic filter design. J. Electr. Eng. 62(3), 126–133 (2011)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fani, R., Farshidi, E. A FG-MOS Based Fully Differential Current Controlled Conveyor and Its Applications. Circuits Syst Signal Process 32, 993–1011 (2013). https://doi.org/10.1007/s00034-012-9513-z
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00034-012-9513-z