Skip to main content
SpringerLink
Log in

Forecasting the stress concentration coefficient around the mined panel using soft computing methodology

  • Original Article
  • Published:
Engineering with Computers Aims and scope Submit manuscript

Abstract

Stress analysis around the mined panel is one of the most critical topics in longwall mining for stability analysis of surrounding pillars and access tunnels. Actually, stress redistribution due to roadway extraction along with the longwall mining-induced stress must be considered in designing the panel surrounding structures. In this research, three new methods, i.e., radial basis function neural network (RBFNN), fuzzy inference system (FIS) and statistical analysis (SA) models have been developed to predict the stress concentration coefficient (SCC) around a mined panel. The transferred stress due to longwall mining has been also considered in predicted SCC from these models. Proposed models have been constructed based on the sufficient datasets gathered from the literatures. For SCC prediction, the height of destressed zone above the mined panel, rock mass unit weight, overburden depth and horizontal distance from the panel edge have been regarded as input variables. Based on the actual testing datasets, performance of the suggested models has been evaluated using the statistical indices. Accordingly, it was proved that RBFNN and FIS models have better capability compared to the SA model and their results are in a great agreement with the real values. Moreover, proposed models were practically applied in Tabas longwall coal mine of Iran and verified by comparing their results with the results of existing models. Finally, conducted sensitivity analyses of the proposed models indicate that height of destressed zone and unit weight are the most and least influencing variables on the SCC in all models.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

References

  1. Majdi A, Rezaei M (2013) Application of artificial neural networks for predicting the height of destressed zone above the mined panel in longwall coal mining. 47th U.S. Rock Mechanics/Geomechanics Symposium, 23–26 June, San Francisco, California, USA, pp. 1665–1673

  2. Rezaei M, Hossaini MF, Majdi A (2015) A time-independent energy model to determine the height of destressed zone above the mined panel in longwall coal mining. Tunn Undergr Space Technol 47:81–92

    Article  Google Scholar 

  3. Rezaei M, Hossaini MF, Majdi A (2015) Determination of longwall mining-induced stress using the strain energy method. Rock Mech Rock Eng 48:2421–2433

    Article  Google Scholar 

  4. Rezaei M, Hossaini MF, Majdi A (2015) Development of a time-dependent energy model to calculate the mining-induced stress over gates and pillars. J Rock Mech Geotech Eng 7:306–317

    Article  Google Scholar 

  5. Rezaei M (2016) Development of an intelligent model to estimate the height of caving—fracturing zone over the longwall gobs. Neural Comput Appl. https://doi.org/10.1007/s00521-016-2809-3

    Google Scholar 

  6. Rezaei M, Hossaini MF, Majdi A, Najmoddini I (2017) Determination of the height of destressed zone above the mined panel: an ANN model. Int J Min Geo-Eng 51(1):1–7

    Google Scholar 

  7. Rezaei M (2018) Long-term stability analysis of goaf area in longwall mining using minimum potential energy theory. J Min Environ 9(1):169–182

    Google Scholar 

  8. Rezaei M, Majdi A, Hossaini MF, Najmoddini I (2018) Study of the roof behavior in longwall gob in long-term condition. J Geol Min Res 10(2):15–27

    Article  Google Scholar 

  9. Jiránková E, Petroš V, Šancer J (2012) The assessment of stress in an exploited rock mass based on the disturbance of the rigid overlying strata. Int J Rock Mech Min Sci 50:77–82

    Article  Google Scholar 

  10. Suchowerska AM, Merifield RS, Carter JP, Clausen J (2012) Prediction of underground cavity roof collapse using the Hoek–Brown failure criterion. Comput Geotech 44:93–103

    Article  Google Scholar 

  11. Nikafshan Rad H, Hasanipanah M, Rezaei M, Lotfi Eghlim A (2017) Developing a least squares support vector machine for estimating the blast-induced flyrock. Eng Comput. https://doi.org/10.1007/s00366-017-0568-0

    Google Scholar 

  12. Sharma LK, Singh R, Umrao RK, Sharma KM, Singh TN (2017) Evaluating the modulus of elasticity of soil using soft computing system. Eng Comput 33(3):497–507

    Article  Google Scholar 

  13. Hasanipanah M, Naderi R, Kashir J, Noorani SA, Qaleh AZA (2017) Prediction of blast-produced ground vibration using particle swarm optimization. Eng Comput 33(2):173–179

    Article  Google Scholar 

  14. Hasanipanah M, Faradonbeh RS, Amnieh HB, Armaghani DJ, Monjezi M (2017) Forecasting blast-induced ground vibration developing a CART model. Eng Comput 33(2):307–316

    Article  Google Scholar 

  15. Peng SS (2006) Longwall mining. 2the Edition, Society for Mining, Metallurgy, and Exploration. Inc. (SME), Englewood

    Google Scholar 

  16. Salamon MDG (1964) Elastic analysis of displacements and stresses induced by the mining of seam or reef deposits. Part II. J S Afr Inst Min Metall 64(6):197–218

    Google Scholar 

  17. Majdi A (1988) The stability of face access tunnel in the deep soft rocks of coal mining. PhD thesis, McGill University, Montreal, Canada

  18. Mark C (1992) Analysis of longwall pillar stability (ALPS): an update. In: Proceedings of the workshop on coal pillar mechanics and design, IC 9315, Bureau of Mines, pp. 238–249

  19. Heasley KA (2000) The forgotten denominator, pillar loading. In: Proceedings of the 4th North American rock mechanics symposium, Seattle, WA, pp. 457–464

  20. Bai JB, Shen WL, Guo GL, Wang XY, Yu Y (2015) Roof deformation, failure characteristics, and preventive techniques of gob-side entry driving heading adjacent to the advancing working face. Rock Mech Rock Eng 48(6):2447–2458

    Article  Google Scholar 

  21. Kang H, Yang J, Meng X (2015) Tests and analysis of mechanical behaviours of rock bolt components for China’s coal mine roadways. J Rock Mech Geotech Eng 7:14–26

    Article  Google Scholar 

  22. Ming-he J, Xue-hua L, Qiang-ling Y, Dong-wei L, Zhao-hui C, Jian Z (2015) Numerical investigation into effect of rear barrier pillar on stress distribution around a longwall face. J Cent South Univ 22:4372–4384

    Article  Google Scholar 

  23. Meng Z, Shi X, Li G (2016) Deformation, failure and permeability of coal-bearing strata during longwall mining. Eng Geol 208:69–80

    Article  Google Scholar 

  24. Puller Jesse W, Mills Ken W, Jeffrey Rob G, Walker Rick J (2016) In situ stress measurements and stress change monitoring to monitor overburden caving behaviour and hydraulic fracture pre-conditioning. Int J Min Sci Technol 26(1):103–110

    Article  Google Scholar 

  25. Zhu GA, Dou LM, Li ZL, Cai W, Kong Y, Li J (2016) Mining-induced stress changes and rock burst control in a variable-thickness coal seam. Arab J Geosci 9:355. https://doi.org/10.1007/s12517-016-2356-3

    Article  Google Scholar 

  26. Wang P, Zhao J, Chugh YP, Wang Z (2017) A novel longwall mining layout approach for extraction of deep coal deposits. Minerals 7(60):1–23

    Google Scholar 

  27. Xie JL, Xu JL (2017) Effect of key stratum on the mining abutment pressure of a coal seam. Geosci J 21(2):267–276

    Article  Google Scholar 

  28. Whittaker BN, Singh RN (1979) Evaluation of the design requirements and performance of gate roadways. Min Eng 138:535–548

    Google Scholar 

  29. Peng SS (1986) Coal mine ground control, 2nd edn. Wiley, New York

    Google Scholar 

  30. Sheorey PR (1993) Design of coal pillar arrays and chain pillars. Comprehensive rock engineering, vol 2, Pergamon Press, Oxford

    Google Scholar 

  31. Toraño J, Rodríguez Díez R, Rivas Cid JM, Casal Barciell MM (2012) FEM modeling of roadways driven in a fractured rock mass under a longwall influence. Comput Geotech 29(6):411–431

    Article  Google Scholar 

  32. Yasitli NE, Unver B (2005) 3D numerical modeling of longwall mining with top-coal caving. Int J Rock Mech Min Sci 42(2):219–235

    Article  Google Scholar 

  33. Ouyang ZH, Li CH, Xu WC, Li HJ (2009) Measurements of in situ stress and mining-induced stress in Beiminghe iron mine of China. J Centr South Univer Technol 16(1):85–90

    Article  Google Scholar 

  34. Singh GSP, Singh UK (2010) Prediction of caving behavior of strata and optimum rating of hydraulic powered support for longwall workings. Int J Rock Mech Min Sci 47(1):1–16

    Article  Google Scholar 

  35. Yang W, Lin BQ, Qu YA, Li ZW, Zhai C, Jia L, Zhao WQ (2011) Stress evolution with time and space during mining of a coal seam. Int J Rock Mech Min Sci 48(7):1145–1152

    Article  Google Scholar 

  36. Yang Y, Bai J, Chen K, Wang X, Xiao T, Chen Y (2011) Failure mechanism and stability control technology of rock surrounding a roadway in complex stress conditions. Min Sci Technol (China) 21(3):301–306

    Article  Google Scholar 

  37. Khanal M, Adhikary D, Balusu R (2011) Evaluation of mine scale longwall top coal caving parameters using continuum analysis. Min Sci Technol (China) 21(6):787–796

    Article  Google Scholar 

  38. Xie XZ, Fan ZZ, Huang ZZ, Gang X (2011) Research on unsymmetrical loading effect induced by the secondary mining in the coal pillar. Procedia Eng 26:725–730

    Article  Google Scholar 

  39. Likar J, Medved M, Lenart M, Mayer J, Malenković V, Jeromel G, Dervarič E (2012) Analysis of geomechanical changes in hanging wall caused by longwall multi top caving in coal mining. J Min Sci 48(1):135–145

    Article  Google Scholar 

  40. Khanal M, Adhikary D, Balusu R (2012) Numerical analysis and geotechnical assessment of mine scale model. Int J Mining Sci Technol 22(5):693–698

    Article  Google Scholar 

  41. Song W, Xu W, Du J, Wan H (2012) Stability of workface using longwall mining method in extremely thin and gently inclined iron mine. Saf Sci 50(4):624–628

    Article  Google Scholar 

  42. Dattatreyulu JV, Khanal M, Adhikary D, Balusu R (2012) Geotechnical studies for introducing high capacity longwalls and longwall top coal caving mining in SCCL—a case study. In: Proceedings of the 4th coal summit, New Delhi, India

  43. Shabanimashcool M, Charlie CL (2013) A numerical study of stress changes in barrier pillars and a border area in a longwall coal mine. Int J Coal Geol 106:39–47

    Article  Google Scholar 

  44. Jia JH, Kang HP, Zhang XR (2013) Evaluation of coal pillar loads during longwall extraction using the numerical method and its application. J Coal Sci Eng (China) 19(3):269–275

    Article  Google Scholar 

  45. Guo ZB, Jiang YL, Pang JW, Liu JW (2013) Distribution of ground stress on Puhe coal mine. Int J Min Sci Technol 23(1):139–143

    Article  Google Scholar 

  46. Gao F, Stead D, Coggan J (2014) Evaluation of coal longwall caving characteristics using an innovative UDEC Trigon approach. Comput Geotech 55:448–460

    Article  Google Scholar 

  47. Haykin S (1999) Neural networks: a comprehensive foundation. Prentice-Hall, Upper Saddle River

    MATH  Google Scholar 

  48. Christodoulou C, Georgiopoulos M (2001) Applications of neural networks in electromagnetic. Artech House Publishers, Norwood

    Google Scholar 

  49. Asadizadeh M, Hossaini MF (2016) Predicting rock mass deformation modulus by artificial intelligence approach based on dilatometer tests. Arab J Geosci 9:96. https://doi.org/10.1007/s12517-015-2189-5

    Article  Google Scholar 

  50. Bishop CM (1995) Neural networks for pattern recognition. Oxford University Press, New York, pp 165–171

    Google Scholar 

  51. Narendra BS, Sivapullaiah PV, Suresh SN, Omkar SN (2006) Prediction of unconfined compressive strength of soft grounds using computational intelligence techniques: a comparative study. Comput Geotech 33:196–208

    Article  Google Scholar 

  52. Yilmaz I, Kaynar O (2011) Multiple Regression, ANN (RBF, MLP) and ANFIS models for prediction of swell potential of clayey soils. Expert Syst Appl 38:5958–5966

    Article  Google Scholar 

  53. Broomhead DS, Lowe D (1998) Multivariable functional interpolation and adaptive networks. Complex Syst 2:321–355

    MathSciNet  MATH  Google Scholar 

  54. Rezaei M, Majdi A, Monjezi M (2014) An intelligent approach to predict unconfined compressive strength of rock surrounding access tunnels in longwall coal mining. Neural Comput Appl 24(1):233–241

    Article  Google Scholar 

  55. Rezaei M, Asadizadeh M, Hossaini MF, Majdi A (2015) Prediction of representative deformation modulus of longwall panel roof rock strata using Mamdani fuzzy system. Int J Min Sci Technol 25(1):23–30

    Article  Google Scholar 

  56. Zadeh LA (1965) Fuzzy sets. Inf Control 8:330–353

    Article  Google Scholar 

  57. De Smith MJ (2015) Statistical analysis handbook—a web-based statistics resource. The Winchelsea Press, Winchelsea

    Google Scholar 

  58. Rojas R (1996) Neural networks: a systematic introduction. Springer Verlag, Berlin

    Book  MATH  Google Scholar 

  59. Sahebi A, Jalalifar H, Ebrahimi MA (2010) Stability analysis and optimum support design of a roadway in a faulted zone during longwall face retreat—case study: Tabas coal mine. In: Aziz N (ed) Proceedings of the 10th underground coal operators’ conference, University of Wollongong and the Australasian Institute of Mining and Metallurgy, pp. 88–96

  60. Khoshjavan S, Mazlumi M, Rezai B, Rezai M (2010) Estimation of hardgrove grindability index (HGI) based on the coal chemical properties using artificial neural networks. Orient J Chem 26(4):1271–1280

    Google Scholar 

  61. Sayadi AR, Tavassoli SMM, Monjezi M, Rezaei M (2014) Application of neural networks to predict net present value in mining projects. Arab J Geosci 7(3):1067–1072

    Article  Google Scholar 

  62. Rezaei M (2017) Feasibility of novel techniques to predict the elastic modulus of rocks based on the laboratory data. Int J Geotech Eng. https://doi.org/10.1080/19386362.2017.1397873

    Google Scholar 

  63. Rajabi M, Rahmannejad R, Rezaei M, Ganjalipour K (2017) Evaluation of the maximum horizontal displacement around the power station caverns using artificial neural network. Tunn Undergr Space Technol 64:51–60

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mining Engineering, Faculty of Engineering, University of Kurdistan, Sanandaj, Iran

    Mohammad Rezaei

Authors
  1. Mohammad Rezaei
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Mohammad Rezaei.

Ethics declarations

Conflict of interest

The author declares that he has no conflict of interest.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Rezaei, M. Forecasting the stress concentration coefficient around the mined panel using soft computing methodology. Engineering with Computers 35, 451–466 (2019). https://doi.org/10.1007/s00366-018-0608-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00366-018-0608-4

Keywords

Search

Navigation