Abstract
An integrated and simultaneous design that considers products, services, and information systems is essential due to the mutual influences among each of the three components. This is particularly important in technical customer services (TCS), as the engineering process combines complex high-tech products with diverse types of services. However, to-date no explicit guidance on the integration of information systems into the product service systems engineering process exists. Thus, we propose a method to design service support systems simultaneously. For designing the method, a design science research approach was applied. We demonstrated the applicability of our method by designing and implementing a two-tier service system in a real-world scenario in the domain of TCS: A Virtual Reality-based Training System for training purposes along with a Smart Glasses-based Support System that guides the service technician at the point of service. By proposing and demonstrating our method, we enhance the body of knowledge in service systems engineering and design of IS. The practical contribution is given in additional guidance for designers of new products, services, and IS to master complexity and foster information support of technicians.
Similar content being viewed by others
References
Abramovici M, Aidi Y (2015) A knowledge-based assistant for real-time planning and execution of PSS engineering change processes. Procedia CIRP 30:445–450. doi:10.1016/j.procir.2015.03.026
Abramovici M, Aidi Y, Dang HB (2013) Knowledge-based lifecycle management approach for product service systems (PSS). IFIP International Conference on Product Lifecycle Management. Springer, Berlin, pp 239–248. doi:10.1007/978-3-642-41501-2_24
Agnihothri S, Sivasubramaniam N, Simmons D (2002) Leveraging technology to improve field service. Int J Serv Ind Manag 13:47–68. doi:10.1108/09564230210421155
Alonso-Rasgado T, Thompson G (2006) A rapid design process for total care product creation. J Eng Des 17(6):509–531
Alonso-Rasgado T, Thompson G, Elfström B-O (2004) The design of functional (total care) products. J Eng Des 15(6):515–540
Baines TS, Lightfoot HW, Evans S et al (2007) State-of-the-art in product-service systems. Proc Inst Mech Eng Part B J Eng Manuf 221:1543–1552
Baines T, Lightfoot H, Smart P, Fletcher S (2013) Servitization of manufacture—exploring the deployment and skills of people critical to the delivery of advanced services. J Manuf Technol Manag 24:637–646. doi:10.1108/17410381311327431
Balzert H (2009) Lehrbuch der Softwaretechnik: Basiskonzepte und Requirements Engineering, 3rd edn. Spektrum Akademischer Verlag, Heidelberg
Becker J, Janiesch C, Pfeiffer D (2007a) Reuse mechanisms in situational method engineering. In: Ralyté J, Brinkkemper S, Henderson-Sellers B (eds) In: Proceedings of the IFIP WG 8.1 Working conference on situational method engineering: fundamentals and experiences (ME). International Federation for Information Processing, vol 244. Springer, Boston, pp 79–93. doi: 10.1007/978-0-387-73947-2_8
Becker J, Knackstedt R, Pfeiffer D, Janiesch C (2007b) Configurative method engineering—on the applicability of reference modeling mechanisms in method engineering. In: Proceedings of the 13th Americas Conference on Information System (AMCIS 2007)
Becker J, Beverungen D, Knackstedt R, Matzner M (2009) Configurative service engineering—a rule-based configuration approach for versatile service processes in corrective maintenance. In: Proceedings of the 42nd Annual Hawaii International Conference of System Sciences (HICSS 2011), Kauai, HI, pp 1–10. doi:10.1109/HICSS.2009.127
Becker J, Beverungen D, Knackstedt R, Matzner M, Muller O (2011) Information needs in service systems—a framework for integrating service and manufacturing business processes. In: Proceedings of the 44th Hawaii International Conference of System Sciences (HICSS 2011), Big island, Hawaii, pp 1–10. doi:10.1109/HICSS.2011.243
Berkovich M, Leimeister JM, Krcmar H (2011) Requirements engineering für product service systems. Wirtschaftsinformatik 53:357–370
Böhmann T, Leimeister JM, Möslein K (2014) Service systems engineering. Bus Inf Syst Eng 6:73–79. doi:10.1007/s12599-014-0314-8
Boughnim N, Yannou B (2005) Using blueprinting method for developing product-service systems. Int Conf Eng Des 2005:1–16
Brinkkemper S (1996) Method engineering: engineering of information systems development methods and tools. Inf Softw Technol 38:275–280. doi:10.1016/0950-5849(95)01059-9
Cavalieri S, Pezzotta G (2012) Product-service systems engineering: state of the art and research challenges. Comput Ind 63:278–288. doi:10.1016/j.compind.2012.02.006
Däuble G, Özcan D, Niemöller C et al (2015) Information needs of the mobile technical customer service—a case study in the field of machinery and plant engineering. In: Proceedings of the 48th Annual Hawaii International Conference on System Sciences (HICSS 2015). Manoa, pp 1018–1027
Davis FD, Bagozzi RP, Warshaw PR (1989) User acceptance of computer technology: a comparison of two theoretical models. Manag Sci 35:982–1003. doi:10.1287/mnsc.35.8.982
Deng P, Wright I (2001) A conceptual framework for building knowledge management systems. In: Proceedings of the 7th Americas Conference on Information of System (AMCIS 2001)
Durugbo C (2013) Integrated product-service analysis using SysML requirement diagrams. Syst Eng. doi:10.1002/sys.21229
Edvardsson B, Olsson J (1996) Key concepts for new service development. Serv Ind J 16:140–164
Fellmann M, Hucke S, Breitschwerdt RR et al (2011a) Supporting technical customer services with mobile devices: towards an integrated information system architecture. In: Proceedings of the 17th Americas Conference Information of System (AMCIS 2011)
Fellmann M, Kammler F, Reinke P, Matijacic M, Schlicker M, Thomas O, Nüttgens M (2011b) Customer-oriented configuration and specification of mobile support systems for improved TCS productivity and empowerment. In: Proceedings of the 12th International RESER Conference on Services and economic development: local and global challenges. Bucharest, Romania
Fellmann M, Özcan D, Matijacic M et al (2013) Towards a mobile technical customer service support platform. In: Daniel F, Papadopoulos GA, Thiran P (eds) 10th international conference, MobiWIS 2013. Springer, Berlin, pp 296–299
Freina L, Ott M (2015) A literature review on immersive virtual reality in education: state of the art and perspectives. In: Conference proceedings of »eLearning and software for education« (eLSE). p 133
Gregor S, Jones D (2007) The anatomy of a design theory. J Assoc Inf Syst 8:313–335
Griffith TL, Sawyer JE, Neale MA (2003) Virtualness and knowledge in teams: managing the love triangle of organizations, individuals, and information technology. MIS Q 27:265–287. doi:10.2307/30036531
Holten R, Dreiling A, Becker J (2005) Ontology-driven method engineering for information systems development. In: Green P, Rosemann M (eds) Business sstems analysis with ontologies. Hershey, PA: Idea Group Publishing. pp 174–217. doi:10.4018/978-1-59140-339-5.ch007
Isaksson O, Larsson TC, Rönnbäck Ö (2009) Development of product-service systems: challenges and opportunities for the manufacturing firm. J Eng Des 20:329–348
Kalfoglou Y, Schorlemmer M (2003) IF-map: an ontology-mapping method based on information-flow theory. Journal on data semantics I, Springer, Berlin, Heidelberg, pp 98–127. doi:10.1007/978-3-540-39733-5_5
Kett H, Voigt K, Scheithauer G, Cardoso J (2008) Service engineering in business ecosystems. In: XVIII international RESER conference. pp 1–22
Lee SW, Kim YS (2010) A product-service systems design method integrating service function and service activity and case studies. In: Proceedings of the 2nd CIRP international conference on industrial product service systems. pp 275–282
Legner C, Nolte C, Nils U (2011) Evaluating mobile business applications in service maintenance processes: results of a quantitative-empirical study. In: ECIS 2011 Proceedings. p 247
Leimeister JM, Glauner C (2008) Hybride Produkte—Einordnung und Herausforderungen für die Wirtschaftsinformatik. Wirtschaftsinformatik 50:248–251. doi:10.1365/s11576-008-0051-z
Maiden NAM, Rugg G (1996) ACRE: selecting methods for requirements acquisition. Softw Eng J 11(3):183–192
March ST, Smith GF (1995) Design and natural science research on information technology. Decis Support Syst 15:251–266. doi:10.1016/0167-9236(94)00041-2
Marques P, Cunha PF, Valente F, Leitão A (2013) A methodology for product-service systems development. In: Procedia CIRP
Matijacic M, Fellmann M, Özcan D et al (2013) Elicitation and consolidation of requirements for mobile technical customer services support systems. In: Proceedings of the 34th international conference on information systems (ICIS 2013). Mailand, pp 1–16
Maussang N, Sakao T, Zwolinski P, Brissaud D (2007) A model for designing product-service systems using functional analysis and agent based model. In: International conference on engineering design, ICED’07. Paris, pp 1–11
McAloone T (2006) Teaching and implementation models for sustainable PSS development. Sustain Consum Prod Oppor Chall 23:125
Moody DL (2003) The method evaluation model: a theoretical model for validating information systems design methods. Paper presented at the European Conference on Information Systems (ECIS), Naples, Italy
Moore C, Rugullies E (2005) The information workplace will redefine the world of work at last. Forrester Research, Cambridge
Müller P, Stark R (2010) A generic PSS development process model based on theory and an empirical study. In: DS 60: proceedings of DESIGN 2010, the 11th international design conference, Dubrovnik
Müller-Wienbergen F, Müller O, Seidel S, Becker J (2011) Leaving the beaten tracks in creative work—a design theory for systems that support convergent and divergent thinking. J Assoc Inf 12:714–740
Myers M (2009) Qualitative research in business and management. Sage Publications Ltd., London
Ncube C, Maiden NAM (1999) PORE: procurement-oriented requirements engineering method for the component-based systems engineering development paradigm 2: PORE: a requirements engineering method for the CBSE process. In: International workshop on component-based software engineering. pp 1–12
Niemöller C, Özcan D, Metzger D, Thomas O (2014) Towards a design science-driven product-service system engineering methodology. In: Tremblay M, VanderMeer D, Rothenberger M, et al. (eds) Advancing the Impact of Design Science: Moving from Theory to Practice SE - 12 (Proceedings of DESRIST 2014). Springer International Publishing, pp 180–193
Niemöller C, Metzger D, Fellmann M et al (2016) Shaping the future of mobile service support systems—ex-ante evaluation of smart glasses in technical customer service processes. In: Mayr HC, Pinzger M (eds) Informatik 2016. Lecture Notes in Informatics (LNI), vol P-259. GI Bonn 2016
Oates BJ (2006) Researching information systems and computing. Sage Publications Ltd., London
Offermann P, Blom S, Levina O, Bub U (2010) Proposal for components of method design theories. Bus Inf Syst Eng 2:295–304. doi:10.1007/s12599-010-0120-x
Oliveira P, von Hippel E (2011) Users as service innovators: the case of banking services. Res Policy 40:806–818. doi:10.1016/j.respol.2011.03.009
Österle H, Becker J, Frank U et al (2011) Memorandum on design-oriented information systems research. Eur J Inf Syst 20:7–10. doi:10.1057/ejis.2010.55
Özcan D, Niemöller C, Fellmann M et al (2013) A use case-driven approach to the design of service support systems: making use of semantic technologies. In: Proceedings of the international symposium on services science (ISSS). Leipzig, pp 105–116
Özcan D, Fellmann M, Thomas O (2014) Towards a big data-based technical customer service management. In: Plödereder E, Grunske L, Schneider E, Ull D (eds) Big data in mobility and logistics (BDMobiLog)—Informatik. Bonner Köllen Verlag, Stuttgart, pp 1–12
Peffers K, Tuunanen T, Rothenberger MA, Chatterjee S (2007) A design science research methodology for information systems research. J Manag Inf Syst 24:45–77. doi:10.2753/MIS0742-1222240302
Polanyi M (1966) The tacit dimension. Knowl Organ. doi:10.1016/B978-0-7506-9718-7.50010-X
Ray G, Muhanna WA, Barney JB (2005) Information technology and the performance of the customer service process: a resource-based analysis. MIS Q 29:625–652. doi:10.2307/25148703
Regenbrecht H, Schubert T (1998) Measuring the sense of presence and its relations to fear of heights in virtual environments. Int J Human-Comp Interact 10(3):233–249
Santanen EL, Briggs RO, de Vreede GJ (1999) A cognitive network model of creativity: a renewed focus on brainstorming methodology. Proc 20th Int Conf Inf Syst 489–494
Sarnikar S, Deokar AV (2009) Towards a design theory for process-based knowledge management systems. Proc 30th Int Conf Inf Syst Paper 63
Schwaber K (1997) SCRUM Development process. In: Sutherland J, Casanave C, Miller J et al (eds) Business object design and implementation SE-11. Springer, London, pp 117–134
Shostack GL (1982) How to design a service. Eur J Mark 16:49–63. doi:10.1108/EUM0000000004799
Sommerville I (2005) Integrated requirements engineering: a tutorial. IEEE Softw 22:16–23. doi:10.1109/MS.2005.13
Sonnenberg C, vom Brocke J (2012) Evaluations in the science of the artificial—reconsidering the build-evaluate pattern in design science research. In: Peffers K, Rothenberger M, Kuechler B (eds) DESRIST 2012, LNCS 7286. Springer, Berlin, pp 381–397
Spath D, Demuß L (2006) Entwicklung hybrider Produkte—Gestaltung materieller und immaterieller Leistungsbündel. In: Service Engineering. Springer, pp 463–502
Tan A, McAloone TC, Lauridsen EH (2009) Reflections on Product/Service-System (PSS) conceptualisation in a course setting. Int J Des Eng
Tautz C (2001) Traditional process representations are ill-suited for knowledge intensive processes. In: Proceedings of the workshop program at the 4th international conference on case-based reasoning
Thomas O, Walter P, Loos P (2008a) Product-Service Systems: Konstruktion und Anwendung einer Entwicklungsmethodik. Wirtschaftsinformatik 50:208–219. doi:10.1365/s11576-008-0048-7
Thomas O, Walter P, Loos P (2008b) Design and usage of an engineering methodology for product-service systems. J Des Res 7:177–195. doi:10.1504/JDR.2008.020854
Thomas O, Loos P, Nüttgens M (2010) Hybride Wertschöpfung—Mobile Anwendungssysteme für effiziente Dienstleistungsproduktivität im technischen Kundendienst. Springer, Berlin
Velamuri VK, Neyer A-K, Möslein KM (2011) Hybrid value creation: a systematic review of an evolving research area. J für Betriebswirtschaft 61:3–35. doi:10.1007/s11301-011-0070-5
Walter P (2010) Technische Kundendienstleistungen: Einordnung, Charakterisierung und Klassifikation. In: Thomas O, Loos P, Nüttgens M (eds) Hybride Wertschöpfung, 1st edn. Springer, Berlin, pp 24–41
Weber C, Steinbach M, Botta C, Deubel T (2004) Modelling of product-service systems (PSS) based on the PDD approach. In: DS 32: Proceedings of DESIGN 2004, the 8th International Design Conference. Dubrovnik, Croatia
Acknowledgments
We wish to thank the guest editors and reviewers for their constructive and helpful comments to finalize the article. The research and development presented in this paper is part of the project "Glassroom" and is funded by the German Federal Ministry of Education and Research (BMBF, grant number 01PD14014A).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Metzger, D., Niemöller, C. & Thomas, O. Design and demonstration of an engineering method for service support systems. Inf Syst E-Bus Manage 15, 789–823 (2017). https://doi.org/10.1007/s10257-016-0331-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10257-016-0331-x