Abstract
Excessive tool wear leads to the damage and eventual breakage of the tool, workpiece, and machining center. Therefore, it is crucial to monitor the condition of tools during processing so that appropriate actions can be taken to prevent catastrophic tool failure. This paper presents a hybrid information system based on a long short-term memory network (LSTM) for tool wear prediction. First, a stacked LSTM is used to extract the abstract and deep features contained within the multi-sensor time series. Subsequently, the temporal features extracted are combined with process information to form a new input vector. Finally, a nonlinear regression model is designed to predict tool wear based on the new input vector. The proposed method is validated on both NASA Ames milling data set and the 2010 PHM Data Challenge data set. Results show the outstanding performance of the hybrid information model in tool wear prediction, especially when the experiments are run under various operating conditions.
Similar content being viewed by others
References
Aghazadeh, F., Tahan, A., & Thomas, M. (2018). Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process. The International Journal of Advanced Manufacturing Technology,98(9–12), 3217–3227. https://doi.org/10.1007/s00170-018-2420-0.
Agogino, A., & Goebel, K. (2007). Milling data set. In U. B. BEST lab (Ed.) NASA ames prognostics data repository NASA ames research center, moffett field, CA.(http://ti.arc.nasa.gov/project/prognostic-data-repository).
Bengio, Y., Simard, P., & Frasconi, P. (1994). Learning long-term dependencies with gradient descent is difficult. IEEE Transactions on Neural Networks,5(2), 157–166. https://doi.org/10.1109/72.279181.
Bhattacharyya, P., Sengupta, D., Mukhopadhyay, S., & Chattopadhyay, A. B. (2008). On-line tool condition monitoring in face milling using current and power signals. International Journal of Production Research,46(4), 1187–1201. https://doi.org/10.1080/00207540600940288.
Brocki, L., & Marasek, K. (2015). Deep belief neural networks and bidirectional long-short term memory hybrid for speech recognition. Archives of Acoustics,40(2), 191–195. https://doi.org/10.1515/aoa-2015-0021.
Cho, S., Binsaeid, S., & Asfour, S. (2009). Design of multisensor fusion-based tool condition monitoring system in end milling. The International Journal of Advanced Manufacturing Technology,46(5–8), 681–694. https://doi.org/10.1007/s00170-009-2110-z.
Deng, L. (2014). A tutorial survey of architectures, algorithms, and applications for deep learning. APSIPA Transactions on Signal and Information Processing. https://doi.org/10.1017/atsip.2013.9.
Elman, J. L. (1990). Finding structure in time. Cognitive Science,14(2), 179–211. https://doi.org/10.1016/0364-0213(90)90002-E.
Fischer, T., & Krauss, C. (2018). Deep learning with long short-term memory networks for financial market predictions. European Journal of Operational Research,270(2), 654–669. https://doi.org/10.1016/j.ejor.2017.11.054.
Freyer, B. H., Heyns, P. S., & Theron, N. J. (2014). Comparing orthogonal force and unidirectional strain component processing for tool condition monitoring. Journal of Intelligent Manufacturing,25(3), 473–487. https://doi.org/10.1007/s10845-012-0698-6.
García-Ordás, M. T., Alegre-Gutiérrez, E., González-Castro, V., & Alaiz-Rodríguez, R. (2018). Combining shape and contour features to improve tool wear monitoring in milling processes. International Journal of Production Research,56(11), 3901–3913. https://doi.org/10.1080/00207543.2018.1435919.
Goodfellow, I., Bengio, Y., Courville, A., & Bengio, Y. (2016). Deep learning (Vol. (Vol. 1)). Cambridge: MIT press.
Graves, A., & Schmidhuber, J. (2005). Framewise phoneme classification with bidirectional LSTM and other neural network architectures. Neural Networks,18(5–6), 602–610. https://doi.org/10.1016/j.neunet.2005.06.042.
Hinton, G. E., & Salakhutdinov, R. R. (2006). Reducing the dimensionality of data with neural networks. Science,313(5786), 504. https://doi.org/10.1126/science.1127647.
Hochreiter, S., & Schmidhuber, J. (1997). Long short-term memory. Neural Computation,9(8), 1735–1780. https://doi.org/10.1162/neco.1997.9.8.1735.
Jain, A. K., & Lad, B. K. (2017). A novel integrated tool condition monitoring system. Journal of Intelligent Manufacturing,30(3), 1423–1436. https://doi.org/10.1007/s10845-017-1334-2.
Jia, F., Lei, Y., Lin, J., Zhou, X., & Lu, N. (2016). Deep neural networks: A promising tool for fault characteristic mining and intelligent diagnosis of rotating machinery with massive data. Mechanical Systems and Signal Processing,72–73, 303–315. https://doi.org/10.1016/j.ymssp.2015.10.025.
Jimeno Yepes, A. (2017). Word embeddings and recurrent neural networks based on long-short term memory nodes in supervised biomedical word sense disambiguation. Journal of Biomedical Informatics,73, 137–147. https://doi.org/10.1016/j.jbi.2017.08.001.
Kingma, D. P., & Ba, J. (2014). Adam: A method for stochastic optimization. arXiv preprint arXiv:1412.6980.
Kurada, S., & Bradley, C. (1997). A review of machine vision sensors for tool condition monitoring. Computers in Industry,34(1), 55–72. https://doi.org/10.1016/S0166-3615(96)00075-9.
Kwon, H.-B. (2017). Exploring the predictive potential of artificial neural networks in conjunction with DEA in railroad performance modeling. International Journal of Production Economics,183, 159–170. https://doi.org/10.1016/j.ijpe.2016.10.022.
LeCun, Y., Bengio, Y., & Hinton, G. (2015). Deep learning. Nature,521(7553), 436–444. https://doi.org/10.1038/nature14539.
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998). Gradient-based learning applied to document recognition. Proceedings of the IEEE,86(11), 2278–2324. https://doi.org/10.1109/5.726791.
Liu, Y., Hu, X., & Zhang, W. (2019). Remaining useful life prediction based on health index similarity. Reliability Engineering & System Safety,185, 502–510. https://doi.org/10.1016/j.ress.2019.02.002.
Mai, F., Tian, S., Lee, C., & Ma, L. (2019). Deep learning models for bankruptcy prediction using textual disclosures. European Journal of Operational Research,274(2), 743–758. https://doi.org/10.1016/j.ejor.2018.10.024.
Nguyen, K. T. P., & Medjaher, K. (2019). A new dynamic predictive maintenance framework using deep learning for failure prognostics. Reliability Engineering & System Safety,188, 251–262. https://doi.org/10.1016/j.ress.2019.03.018.
Özel, T., & Karpat, Y. (2005). Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks. International Journal of Machine Tools and Manufacture,45(4–5), 467–479. https://doi.org/10.1016/j.ijmachtools.2004.09.007.
Peng, Y., Wang, H., Wang, J., Liu, D., & Peng, X. (2012). A modified echo state network based remaining useful life estimation approach. In 2012 IEEE international conference on prognostics and health management: enhancing safety, efficiency, availability, and effectiveness of systems through PHM technology and application, PHM 2012, June 18, 2012—June 21, 2012, Denver, CO, United states, 2012 (PHM 2012—2012 IEEE international conference on prognostics and health management: Enhancing safety, efficiency, availability, and effectiveness of systems through phm technology and application, conference program). IEEE Computer Society. https://doi.org/10.1109/icphm.2012.6299524.
Ren, Q., Balazinski, M., Baron, L., Jemielniak, K., Botez, R., & Achiche, S. (2014). Type-2 fuzzy tool condition monitoring system based on acoustic emission in micromilling. Information Sciences,255, 121–134. https://doi.org/10.1016/j.ins.2013.06.010.
Sharma, V. S., Sharma, S. K., & Sharma, A. K. (2007). Cutting tool wear estimation for turning. Journal of Intelligent Manufacturing,19(1), 99–108. https://doi.org/10.1007/s10845-007-0048-2.
Shi, C., Panoutsos, G., Luo, B., Liu, H., Li, B., & Lin, X. (2018). Using multiple feature spaces-based deep learning for tool condition monitoring in ultra-precision manufacturing. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2018.2856193.
Si, X.-S., Wang, W., Hu, C.-H., & Zhou, D.-H. (2011). Remaining useful life estimation—A review on the statistical data driven approaches. European Journal of Operational Research,213(1), 1–14. https://doi.org/10.1016/j.ejor.2010.11.018.
Siddhpura, A., & Paurobally, R. (2012). A review of flank wear prediction methods for tool condition monitoring in a turning process. The International Journal of Advanced Manufacturing Technology,65(1–4), 371–393. https://doi.org/10.1007/s00170-012-4177-1.
Sun, J., Hong *, G. S., Rahman, M., & Wong, Y. S. (2005). Improved performance evaluation of tool condition identification by manufacturing loss consideration. International Journal of Production Research,43(6), 1185–1204. https://doi.org/10.1080/00207540412331299701.
Sun, J., Hong, G. S., Rahman, M., & Wong, Y. S. (2007). Identification of feature set for effective tool condition monitoring by acoustic emission sensing. International Journal of Production Research,42(5), 901–918. https://doi.org/10.1080/00207540310001626652.
Tieleman, T., & Hinton, G. (2012). Lecture 6.5-rmsprop: Divide the gradient by a running average of its recent magnitude. COURSERA: Neural Networks for Machine Learning,4(2), 26–31.
Wang, J., Xie, J., Zhao, R., Zhang, L., & Duan, L. (2017). Multisensory fusion based virtual tool wear sensing for ubiquitous manufacturing. Robotics and Computer-Integrated Manufacturing,45, 47–58. https://doi.org/10.1016/j.rcim.2016.05.010.
Wu, D., Jennings, C., Terpenny, J., Kumara, S., & Gao, R. X. (2018a). Cloud-based parallel machine learning for tool wear prediction. Journal of Manufacturing Science and Engineering, Transactions of the ASME. https://doi.org/10.1115/1.4038002.
Wu, J., Su, Y., Cheng, Y., Shao, X., Deng, C., & Liu, C. (2018b). Multi-sensor information fusion for remaining useful life prediction of machining tools by adaptive network based fuzzy inference system. Applied Soft Computing,68, 13–23. https://doi.org/10.1016/j.asoc.2018.03.043.
Wu, Y., Yuan, M., Dong, S., Lin, L., & Liu, Y. (2018c). Remaining useful life estimation of engineered systems using vanilla LSTM neural networks. Neurocomputing,275, 167–179. https://doi.org/10.1016/j.neucom.2017.05.063.
Yang, W.-A., Zhou, W., Liao, W., & Guo, Y. (2014). Prediction of drill flank wear using ensemble of co-evolutionary particle swarm optimization based-selective neural network ensembles. Journal of Intelligent Manufacturing,27(2), 343–361. https://doi.org/10.1007/s10845-013-0867-2.
Yesilyurt, I., & Ozturk, H. (2007). Tool condition monitoring in milling using vibration analysis. International Journal of Production Research,45(4), 1013–1028. https://doi.org/10.1080/00207540600677781.
Zhang, C., Hong, G. S., Xu, H., Tan, K. C., Zhou, J. H., Chan, H. L., et al. (2017). A data-driven prognostics framework for tool remaining useful life estimation in tool condition monitoring. In 22nd IEEE international conference on emerging technologies and factory automation, ETFA 2017, September 12, 2017—September 15, 2017, Limassol, Cyprus, 2018 (pp. 1–8). IEEE international conference on emerging technologies and factory automation, ETFA: Institute of electrical and electronics engineers Inc. https://doi.org/10.1109/etfa.2017.8247659.
Zhang, C., Yao, X., Zhang, J., & Jin, H. (2016). Tool condition monitoring and remaining useful life prognostic based on a wireless sensor in dry milling operations. Sensors (Basel),16(6), 795. https://doi.org/10.3390/s16060795.
Zhang, K.-F., Yuan, H.-Q., & Nie, P. (2015). A method for tool condition monitoring based on sensor fusion. Journal of Intelligent Manufacturing,26(5), 1011–1026. https://doi.org/10.1007/s10845-015-1112-y.
Zhang, B., Zhang, S., & Li, W. (2019). Bearing performance degradation assessment using long short-term memory recurrent network. Computers in Industry,106, 14–29. https://doi.org/10.1016/j.compind.2018.12.016.
Zhao, R., Wang, D., Yan, R., Mao, K., Shen, F., & Wang, J. (2018). Machine health monitoring using local feature-based gated recurrent unit networks. IEEE Transactions on Industrial Electronics,65(2), 1539–1548. https://doi.org/10.1109/tie.2017.2733438.
Zhao, R., Yan, R., Wang, J., & Mao, K. (2017). Learning to monitor machine health with convolutional bi-directional LSTM networks. Sensors (Basel). https://doi.org/10.3390/s17020273.
Zheng, S., Ristovski, K., Farahat, A., & Gupta, C. (2017). Long short-term memory network for remaining useful life estimation. In 2017 IEEE international conference on prognostics and health management, ICPHM 2017, June 19, 2017—June 21, 2017, Dallas, TX, United states, 2017 (pp. 88–95), 2017 IEEE international conference on prognostics and health management, ICPHM 2017: Institute of electrical and electronics engineers Inc. https://doi.org/10.1109/icphm.2017.7998311.
Zhu, K., Wong, Y. S., & Hong, G. S. (2009). Multi-category micro-milling tool wear monitoring with continuous hidden Markov models. Mechanical Systems and Signal Processing,23(2), 547–560. https://doi.org/10.1016/j.ymssp.2008.04.010.
Acknowledgements
This work was supported by the Major Program of National Natural Science Foundation of China (Grant Numbers 51435009).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Cai, W., Zhang, W., Hu, X. et al. A hybrid information model based on long short-term memory network for tool condition monitoring. J Intell Manuf 31, 1497–1510 (2020). https://doi.org/10.1007/s10845-019-01526-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10845-019-01526-4