Skip to main content
Log in

Catadioptric Imaging System with a Hybrid Hyperbolic Reflector for Vehicle Around-View Monitoring

  • Published:
Journal of Mathematical Imaging and Vision Aims and scope Submit manuscript

Abstract

A wide field-of-view (FOV) imaging system is essential for a vehicle around-view monitoring system to ensure the safety of driving or parking. This study presents a hybrid hyperbolic reflector for catadioptric wide FOV imaging. It is possible to observe the horizontal side scene as well as the vertical ground scene surrounding a vehicle using the hyperbolic reflector imaging system with a single camera. The image acquisition model is obtained for the hyperbolic reflector imaging system using the geometrical optics in this study. The image acquisition model is the basis of the image reconstruction algorithm to convert the side scene into a panoramic image and the ground scene into a bird’s-eye image to present it in the driver’s display. Both the horizontal panoramic image and the vertical bird’s-eye image surrounding a vehicle are helpful for driving and parking safety.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  1. Zhang, B., Appia, V., Pekkucuksen, I., Liu, Y.: A surround view camera solution for embedded systems. In: Proceedings of IEEE Conference on Computer Vision and Pattern Recognition Workshops, Ohio, USA, pp. 676–681 (2014)

  2. Yebes, J., Alcantarilla, P., Bergasa, L., Gonzalez, A., Almazan, J.: Surrounding view for enhancing safety on vehicles. In: Proceedings of IEEE Intelligent Vehicles Symposium Workshops (2012)

  3. Lo, W., Lin, D.: Embedded system implementation for vehicle around view monitoring. In: Proceedings of International Conference on Advanced Concepts for Intelligent Vision Systems(ACIVS 2015), Museo Diocesano, Italy. LNCS 9386, pp. 181–192 (2015)

  4. Chen, Y., Tu, Y., Chiu, C., Chen, Y.: Embedded system for vehicle surrounding monitoring. In: Proceedings of IEEE International Conference on Power Electronics and Intelligent Transportation System, pp. 92–95 (2009)

  5. Sato, T., Moro, A., Sugahara, A., Tasaki, T., Yamashita, A., Asama, H.: Spatio-temporal bird’s-eye view images using multiple fish-eye cameras. In: Proceedings of IEEE/SICE International Symposium on System Integration, Kobe, Japan, pp. 753–758 (2013)

  6. Lin, C., Wang, M.: A vision based top-view transformation model for a vehicle parking assistant. Sensors 12, 4431–4446 (2012)

    Article  Google Scholar 

  7. Jang, G., Kim, S., Kweon, I.: Single camera catadioptric stereo system. In: The 6th Workshop on Omnidirectional Vision, Camera Networks and Non-Classical Cameras (OMNIVIS2005) (2005)

  8. Gluckman, J., Nayer, S.: Catadioptric stereo using planner mirrors. Int. J. Comput. Vis. 44(1), 65–79 (2001)

    Article  MATH  Google Scholar 

  9. Hicks, R., Bajcsy, R.: Catadioptric sensor that approximate wide-angle perspective projections. In: Proceedings of International Conference on Pattern Recognition’00, pp. 545–551 (2000)

  10. Svoboda, T., Pajdlar, T.: Epipolar geometry for central catadioptric cameras. Int. J. Comput. Vis. 49(1), 23–37 (2002)

    Article  MATH  Google Scholar 

  11. Micusik, B., Pajdla, T.: Structure from motion with wide circular field of view cameras. IEEE Trans. Pattern Anal. Mach. Intell. 28(7), 1135–1149 (2006)

    Article  Google Scholar 

  12. Nayer, S.: Catadioptric omnidirectional camera. In: Proceedings of IEEE Computer Society Conference on Computer Vision and Pattern Recognition, pp. 482–488 (1997)

  13. Baker, S., Nayar, S.: A theory of catadioptric image formation. In: Proceedings of IEEE International Conference on Computer Vision, Bombay, pp. 35–42 (1998)

  14. Trivedi, M., Gandhi, T., McCall, J.: Looking-in and looking-out of a vehicle: selected investigations in computer vision based enhanced vehicle safety. IEEE Trans. Intell. Transp. Syst. 8(1), 109–120 (2007)

    Article  Google Scholar 

  15. Ehlgen, T., Pajdla, T., Ammon, D.: Eliminating blind spots for assisted driving. IEEE Trans. Intell. Transp. Syst. 9(4), 657–664 (2008)

    Article  Google Scholar 

  16. Cao, M., Vu, A., Barth, M.: A novel omni-directional vision sensing technique for traffic surveillance. In: Proceedings of IEEE Intelligent Transportation Systems Conference, pp. 648–653 (2007)

  17. Kweon, G., Hwang-bo, S., Kim, G., Yang, S., Lee, Y.: Wide-angle catadioptric lens with a rectilinear projection scheme. Appl. Opt. 45(34), 8659–73 (2006)

    Article  Google Scholar 

  18. Kweon, G., Choi, Y., Kim, G., Yang, S.: Extraction of perspectively normal images from video sequences obtained using a catadioptric panoramic lens with the rectilinear projection scheme. In: Technical Proceedings of the 10th World Multi-Conference on Systems, Cybernetics, and Informatics, pp. 67–75 (2006)

  19. Vu, A., Barth, M.: Catadioptric omnidirectional vision sensor integration for vehicle-based sensing. In: Proceedings of 12th IEEE Conference on Intelligent Transportation Systems, pp. 120–126 (2009)

  20. Yi, S., Ahuja, N.: An omnidirectional stereo vision system using a single camera. In: Proceedings of the 18th International Conference on Pattern Recognition (ICPR’06), pp. 861–865 (2006)

  21. Sturzl, W., Boeddeker, N., Dittmar, L., Egelhaaf, M.: Mimicking honeybee eyes with A \(280{^{\circ }}\) field of view catadioptric imaging system. Bioinspiration Biomim. 5, 1–13 (2010)

    Article  Google Scholar 

  22. Cheng, D., Gong, C., Xu, C., Wang, Y.: Design of an ultrawide angle catadioptric lens with an annularly stitched aspherical surface. Opt. Express 24(3), 2664–2677 (2016)

    Article  Google Scholar 

  23. Gluckman, J., Nayar, S.: Catadioptric stereo using planar mirrors. Int. J. Comput. Vis. 44(1), 65–79 (2001)

    Article  MATH  Google Scholar 

  24. Sanchez, J., Canton, M.: Space Image Processing. CRC Press, Boca Raton (1998)

    Google Scholar 

  25. Schonbein, M., Straus, T., Geiger, A.: Calibrating and centering quasi-central catadioptric cameras. In: Proceedings of IEEE International Conference on Robotics and Automation (ICRA), pp. 4443–4450 (2014)

  26. Perditoto, L., Araujo, H.: Estimation of mirror shape and extrinsic parameters in axial catadioptric systems. Image Vis. Comput. 54, 45–59 (2016)

    Article  Google Scholar 

  27. http://www.vision.caltech.edu/bouguetj/calib_doc/

  28. Geyer, C., Daniilidis, K.: A unifying theory for central panoramic systems and practical implications. In: Proceedings of European Conference on Computer Vision (ECCV2000), pp. 445–461 (2000)

  29. Jain, R., Kasturi, R., Schunck, B.: Machine Vision. McGraw-Hill, New York (1995)

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Soo-Yeong Yi.

Additional information

This research was supported by the research program funded by National Research Foundation(Ministry of Education) of Korea (NRF-2015R1D1A1A01057227).

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ko, YJ., Yi, SY. Catadioptric Imaging System with a Hybrid Hyperbolic Reflector for Vehicle Around-View Monitoring. J Math Imaging Vis 60, 503–511 (2018). https://doi.org/10.1007/s10851-017-0770-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10851-017-0770-0

Keywords

Navigation