Skip to main content

Advertisement

Log in

Design and Implementation of a Flexible Multi-Mode DVB-T/H Receiver and Extension to DVBT-2

  • Published:
Journal of Signal Processing Systems Aims and scope Submit manuscript

Abstract

The implementation of broadcasting receiver requires intensive computation of signal processing algorithms, which makes it support up to 50 Mbit/s data transmission. Furthermore, many different operational modes defined in DVB-X standards inevitably require more chip area when implemented in hardware, and substantially increases the design cost when supporting multiple broadcasting standards. Uses of reconfigurable hardware can leads to fast execution and reduces power consumption while maintaining flexibility. These architectures are now suitable for supporting complex and computationally intensive applications. This work presents a flexible DVB-T/H multi-mode demodulator. The major computation requirements of DVB-T/H standard system are identified. The DVB-T/H multi-mode receiver is implemented in real time on the dynamic coarse grained reconfigurable architecture (DART) running at 200 MHz. This implementation permits a dynamic switch from a mode to another. This multi-mode receiver can then accommodate a reliability/energy efficiency trade-off. It’s demonstrated that DART has an overall consumption of 279.4 mW for the most computational mode of DVB-T/H. By applying the adaptation of inner code rate, change of modulation, power slicing optimizations up to 67 % of power reduction can be achieved. This paper discusses the feasibility of extending DVB-T/H demodulator implementation on DART cluster to support DVB-T2 standard features.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9

Similar content being viewed by others

References

  1. DVB Fact Sheet (2011). DVB Project-An Introduction.

  2. DVB Fact Sheet (2014). 2nd Generation Terrestrial, the World’s Most Advanced Digital Terrestrial TV System.

  3. Yang, H., Basutkar, N., Xue, P., Kim, K., & Park, Y.H. (2013). Software-defined dvb-t2 demodulator using scalable dsp processors. doi:10.1109/TCE.2013.6531127.

  4. Pillement, S., Sentieys, O., & David, R. (2008). Dart: A functional-level reconfigurable architecture for high energy efficiency. In EURASIP Journal on Embedded Systems.

  5. ETSIEN 300 744 V1. 6. 1 (2009). Framing Structure channel coding and modulation for digital terrestrial television broadcasting systems (DVB-t).

  6. ETSI TR 102 377 V1. 4. 1 (2009). Implementation guidelines for DVB handled services.

  7. ETSI TR 101 290 V1. 3. 2 (2011). Implementation guidelines for DVB terrestrial services; Transmission aspects.

  8. Speth, M., Fechtel, S., Fock, G., & Meyr, H. (2001). Optimum Receiver Design for Wireless Broad-Band systems Using OFDM: Part II. In IEEE Transactions on Communications (pp. 571–578).

  9. Pan, C., Bagherzadeh, N., Kamalizad, A.H., & Koohi, A. (2003). Design and analysis of a programmable single-chip architecture for dvb-t base-band receiver. In Proceedings of the conference on Design, Automation and Test in Europe (DATE ’03) IEEE Computer Society.

  10. Filippi, A., & Serbetli, S. (2007). Ofdm symbol synchronization using frequency domain pilots in time domain. In Proceedings of Vehicular Technology Conference (IEEE 66th VTC-2007). doi:10.1109/VETECF.2007.294 (pp. 1376–1380).

  11. Shen, Y., & Martinez, E. F. (2006). Channel estimation on ofdm systems. Tech. rep., Freescale Semiconductor Inc, Application Notes AN3059.

  12. Howath, L., Dhaou, I. B., Tenhunen, H., & Isoaho, J. (1999). A novel, high-speed, reconfigurable demapper-symbol deinterleaver architecture for dvb-t. In Proceedings of the IEEE International Symposium on Circuits And Systems (ISCAS) (pp. 382–385).

  13. Lin, S., & Costello, D. J. (2004). Error Control Coding, 2nd edn. Prentice-Hall Computer Applications in Electrical Engineering Series.

  14. DVB Bluebook A122 (2011). Frame structure channel coding and modulation for a second generation digital terrestrial television broadcasting system (DVB-T2).

  15. Zhao, X., Chen, Z., Peng, X., Zhou, D., & Goto, S. (2012). . In 2012 International Symposium on VLSI Design, Automation, and Test (VLSI-DAT). doi:10.1109/VLSI-DAT.2012.6212664 (pp. 1–4).

  16. Digital Video Broadcasting (DVB) (2010). Frame structure channel coding and modulation for the second generation digital terrestrial television broadcasting system (DVB-t2). DVB Document A122.

  17. Wang, F., Kou, Y., Jiang, M., & Xu, Y. (2016). . In 2016 IEEE 83rd Vehicular Technology Conference (VTC Spring). doi:10.1109/VTCSpring.2016.7504191 (pp. 1–4).

  18. Chen, L. F., & Lee, C. Y. (2007). Design of a dvb-t/h cofdm receiver for portable video applications [topics in circuits for communications]. IEEE in Communications Magazine, 45(8), 112–120. doi:10.1109/MCOM.2007.4290323.

  19. Fang, R. D., & Ma, H. P. (2007). A dvb-t/h baseband receiver for mobile environments. In Proceedings of the 2007 WSEAS International Conference on Circuits, Systems, Signal and Telecommunications.

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Faten Ben Abdallah.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ben Abdallah, F. Design and Implementation of a Flexible Multi-Mode DVB-T/H Receiver and Extension to DVBT-2. J Sign Process Syst 90, 493–504 (2018). https://doi.org/10.1007/s11265-017-1264-4

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11265-017-1264-4

Keywords

Navigation