Abstract
One of the major challenges in Wireless Sensor Networks-based internet of things networks is to conserve energy and extend network lifetime. In order to provide green computing, energy-saving is necessary for both unchangeable limited battery sensors and energy outsourced devices such as smartphones. In this research work, a scenario is considered, in which sensors are deployed in an area where smart devices (mobile elements) are present in abundance. Only Mobile Elements can take the role of cluster head (CH). Mobile element is selected as CH based on the weighted average of multiple attributes. Then the cluster heads send data to the cloud network. Cluster members select their CH in a distributed manner and send an acknowledgment message to the respective CH. CH updates its member list and prepares a time division multiple access (TDMA) schedule. On the basis of this TDMA schedule, CH transmits the data of energy critical nodes first. As mobile elements are motile, therefore, proposed work manages mobility to avoid packet loss and end-to-end delay. Simulation and results prove that proposed energy-efficient multi-criteria-based clustering improves network lifetime, average throughput, and minimizes end-to-end delay and communication cost.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Li, Q., Sun, R., Wu, H., & Zhang, Q. (2018). Parallel distributed computing based wireless sensor network anomaly data detection in IoT framework. Cognitive Systems Research, 52, 342–350.
Dezfouli, B., Amirtharaj, I., & Li, C.-C. (2018). Empiot: An energy measurement platform for wireless IoT devices. arXiv preprint arXiv:1804.04794.
Sanislav, T., Zeadally, S., Mois, G. D., & Folea, S. C. (2018). Wireless energy harvesting: Empirical results and practical considerations for internet of things. Journal of Network and Computer Applications, 121, 149–158.
Elazhary, H. (2018). Internet of things (IoT), mobile cloud, cloudlet, mobile IoT, IoT cloud, fog, mobile edge, and edge emerging computing paradigms: Disambiguation and research directions. Journal of Network and Computer Applications, 128, 105–140.
Abdulsalam, H. M., Ali, B. A., & AlRoumi, E. (2017). Usage of mobile elements in internet of things environment for data aggregation in wireless sensor networks. Computers & Electrical Engineering, 72, 789–807.
Ali, B. A., Abdulsalam, H. M., & AlGhemlas, A. (2018). Trust based scheme for IoT enabled wireless sensor networks. Wireless Personal Communications, 99(2), 1061–1080.
Li, Q., Gochhayat, S. P., Conti, M., & Liu, F. (2017). Energiot: A solution to improve network lifetime of IoT devices. Pervasive and Mobile Computing, 42, 124–133.
Ramachandran, N., & Perumal, V. (2018). Delay-aware heterogeneous cluster-based data acquisition in internet of things. Computers & Electrical Engineering, 65, 44–58.
Farman, H., Jan, B., Javed, H., Ahmad, N., Iqbal, J., Arshad, M., et al. (2018). Multi-criteria based zone head selection in internet of things based wireless sensor networks. Future Generation Computer Systems, 87, 364–371.
Kim, D.-Y., & Jung, M. (2017). Data transmission and network architecture in long range low power sensor networks for IoT. Wireless Personal Communications, 93(1), 119–129.
Li, J., Silva, B. N., Diyan, M., Cao, Z., & Han, K. (2018). A clustering based routing algorithm in iot aware wireless mesh networks. Sustainable Cities and Society, 40, 657–666.
Anamalamudi, S., Sangi, A. R., Alkatheiri, M., & Ahmed, A. M. (2018). Aodv routing protocol for cognitive radio access based internet of things (IoT). Future Generation Computer Systems, 83, 228–238.
Luo, J., Wu, D., Pan, C., & Zha, J. (2015). Optimal energy strategy for node selection and data relay in WSN-based IoT. Mobile Networks and Applications, 20(2), 169–180.
Din, S., Ahmad, A., Paul, A., & Rho, S. (2018). MGR: Multi-parameter green reliable communication for internet of things in 5G network. Journal of Parallel and Distributed Computing, 118, 34–45.
Chang, H.-Y. (2017). A connectivity-increasing mechanism of zigbee-based IoT devices for wireless multimedia sensor networks. Multimedia Tools and Applications, 78, 1–18.
Zhou, Z., Zhao, D., Xu, X., Du, C., & Sun, H. (2015). Periodic query optimization leveraging popularity-based caching in wireless sensor networks for industrial IoT applications. Mobile Networks and Applications, 20(2), 124–136.
Bernard, M. S., Pei, T., Li, Z., & Li, K. (2018). Qos strategies for wireless multimedia sensor networks in the context of IoT. In International conference on e-infrastructure and e-services for developing countries (pp. 228–253). Springer.
Ketshabetswe, L. K., Zungeru, A. M., Mangwala, M., Chuma, J. M., & Sigweni, B. (2019). Communication protocols for wireless sensor networks: A survey and comparison. Heliyon, 5(5), e01591.
Hellaoui, H., Koudil, M., & Bouabdallah, A. (2017). Energy-efficient mechanisms in security of the internet of things: A survey. Computer Networks, 127, 173–189.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Jamil, F., Khan, F.Z. Multi-criteria-Based Mobile Hotspot Selection in IoT-Based Highly Dense Network. Wireless Pers Commun 112, 1689–1704 (2020). https://doi.org/10.1007/s11277-020-07122-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11277-020-07122-7