Skip to main content
Log in

A Miniaturized and Polarization Independent Electromagnetic Shield for C and X-Band Applications

  • Published:
Wireless Personal Communications Aims and scope Submit manuscript

Abstract

This paper proposes a miniaturized, polarization independent and dual band frequency selective surface (FSS) based electromagnetic shield. A corrugated FSS and zigzag square ring (ZSR) are arranged in back-to-back configuration over single-layered low-profile dielectric. This configuration not only offers shielding for both C and X-band but also achieves stable polarization independent response for these bands. Simulated and measured results verify its 30 dB average shielding over a wide band and 60° polarization independency alongside. More importantly, the equivalent circuit model analysis and analytical parameterization of this dual band configuration is also investigated. The modelling and simulations are in line with measurements that makes it as a potential shield for C and X-band wireless applications including SATCOMs, Microwave filters and many others.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

References

  1. Munk, B. A. (2000). Frequency selective surface: Theory and design. London: Wiley Interscience.

    Book  Google Scholar 

  2. Khajevandi, S., Oraizi, H., & Poordaraee, M. (2018). Design of planar dual-bandstop FSS using square-loop-enclosing superformula curves. IEEE Antennas and Wireless Propagation Letters, 14(5), 731–734.

    Article  Google Scholar 

  3. Zhu, J., Tang, W., Wang, C., Huang, C., & Shi, Y. (2018). Dual-polarized bandpass frequency-selective surface with quasi-elliptic response based on square coaxial waveguide. IEEE Transactions on Antennas and Propagation, 66(3), 1331–1339.

    Article  Google Scholar 

  4. Bilal, M., Saleem, R., Shabbir, T., & Shafique, M. F. (2017). A novel miniaturized FSS based electromagnetic shield for SATCOM applications. Microwave and Optical Technology Letters, 59(9), 2107–2112.

    Article  Google Scholar 

  5. Xia, B. G., Zhang, D. H., Meng, J., Huang, J., Yao, C. F., & Zhang, J. S. (2013). Terahertz FSS for space borne passive remote sensing application. Electronics Letters, 49(22), 1398–1399.

    Article  Google Scholar 

  6. Meng, L., & Behdad, N. (2013). Frequency selective surfaces for pulsed high-power microwave applications. IEEE Transactions on Antennas and Propagation, 61(2), 677–687.

    Article  Google Scholar 

  7. Saleem, R., Bilal, M., Shabbir, T., & Shafique, M. F. (2019). An FSS-employed UWB antenna system for high-gain portable devices. Microwave and Optical Technology Letters, 61(2), 1404–1410.

    Article  Google Scholar 

  8. Ghosh, A., Kumar, M., Islam, S. N., & Das, S. (2020). Design and analysis of a compact penta-band polarization-insensitive bandstop frequency selective surface. IEEE Antennas and Wireless Propagation Letters, 19(1), 59–63.

    Article  Google Scholar 

  9. Wang, H., Yan, M., Qu, S., Zheng, L., & Wang, J. (2019). Design of a self-complementary frequency selective surface with multi-band polarization separation characteristic. IEEE Access, 7, 36788–36799.

    Article  Google Scholar 

  10. Baladi, E., Semple, M., & Iyer, A. K. (2020). Single-layer dual-band polarization-selective metafilm with independently controlled and closely spaced shielding bands. IEEE Transactions on Antennas and Propagation, 68(3), 1448–1457.

    Article  Google Scholar 

  11. Sofi, M. A., Saurav, K., Koul, S. K. (2020). Frequency-selective surface-based compact single substrate layer dual-band transmission-type linear-to-circular polarization converter. IEEE Transactions on Microwave Theory and Techniques, 1–1.

  12. Paiva, S. B., Neto, V. P. S., & D’Assunção, A. G. (2020). A new compact, stable, and dual-band active frequency selective surface with closely spaced resonances for wireless applications at 2.4 and 2.9 GHz. IEEE Transactions on Electromagnetic Compatibility, 62(3), 691–697.

    Article  Google Scholar 

  13. He, Y., Feng, W., Guo, S., Wei, J., Zhang, Y., Huang, Z., et al. (2020). Design of a dual-band electromagnetic absorber with frequency selective surfaces. IEEE Antennas and Wireless Propagation Letters, 19(5), 841–845.

    Article  Google Scholar 

  14. Guo, Q., Su, J., Li, Z., Song, J., Guan, Y.: Miniaturized-Element Frequency-Selective Rasorber Design Using Characteristic Modes Analysis. IEEE Transactions on Antennas and Propagation pp. 1–1 (2020).

  15. Farooq, U., Shafique, M. F., & Mughal, M. J. (2020). Polarization insensitive dual band frequency selective surface for RF shielding through glass windows. IEEE Transactions on Electromagnetic Compatibility, 62(1), 93–100.

    Article  Google Scholar 

  16. Costa, F., Monorchio, A., & Manara, G. (2014). An overview of equivalent circuit modeling techniques of frequency selective surfaces and metasurface. The Applied Computational Electromagnetics Society Journal, 29(12), 960–976.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Muhammad Bilal.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Bilal, M., Saleem, R., Jabbar, A. et al. A Miniaturized and Polarization Independent Electromagnetic Shield for C and X-Band Applications. Wireless Pers Commun 117, 405–416 (2021). https://doi.org/10.1007/s11277-020-07875-1

Download citation

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11277-020-07875-1

Keywords

Navigation