Abstract
Objective Cone beam computed tomography (CBCT) is an important image technique for oral surgery (dentoalveolar surgery and dental implantology) and maxillofacial applications. This technique requires compact sized scanners with a relatively low radiation dosage, which makes them suitable for imaging of the craniofacial region. This article aims to present the concept and the preliminary findings obtained with the prototype of a new CBCT scanner with dedicated 3D software, specifically designed for dental imaging.
Methods The prototype implements an X-ray tube with a nominal focal spot of 0.5 mm operating at 70–100 kVp and 1–4 mA. The detector is a 6 in. image intensifier coupled with a digital CCD camera. Dosimetry was performed on a RANDO anthropomorphic phantom using Beryllium Oxide thermo-luminescent dosimeters positioned in the phantom in the following site: eyes, thyroid, skin (lips, cheeks, back of the neck), brain, mandible, maxilla and parotid glands. Doses were measured using four configurations, changing the field-of-view (4′′ and 6′′) and acquisition time (10 and 20 s) of the CBCT. Acquisitions were performed with different parameters regarding the x-ray tube, pixel size and acquisition geometries to evaluate image quality in relation to modulation transfer function (MTF), noise and geometric accuracy.
Results The prototype was able to acquire a complete maxillofacial scan in 10–15 s. The CT reconstruction algorithm delivered images that were judged to have high quality, allowing for precise volume rendering. The radiation dose was determined to be 1–1.5 times that of the dose applied during conventional dental panoramic studies.
Conclusion Preliminary studies using the CBCT prototype indicate that this device provides images with acceptable diagnostic content at a relatively low radiation dosage, if compared to systems currently available on the market.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Lascala CA, Panella J, Marques MM (2004) Analysis of the accuracy of linear measurements obtained by cone beam computed tomography. Dentomaxillofac Radiol 33:291–294
Scarfe WC, Farman AG, Sukovic P (2006) Clinical applications of cone-beam computed tomography in dental practice. J Can Dent Assoc 72:75–80
Mozzo P, Procacci C, Tacconi A, Martini PT, Andreis IA (1998) A new volumetric CT machine for dental imaging based on the cone-beam technique: preliminary results. Eur Radiol 8:1558–1564
Sukovic P (2003) Cone beam computed tomography in craniofacial imaging. Orthod Craniofac Res 6:31–36
Ziegler CM, Woertcher R, Brief J, Hassfeld S (2002) Clinical indications for digital volume tomography in oral and maxillofacial surgery. Dentomaxillofac Radiol 31:126–130
Gonzalez L, Vano E, Fernandez R (2001) Reference doses in dental radiodiagnostic facilities. Br J Radiol 74:153–156
Ekestubbe A (1993) Adsorbed doses from CT for dental implant surgery: comparison with conventional tomography. Dentomaxillofac Radiol 22:13–17
Hashimoto K, Arai Y, Iwai K, Araki M, Kawashima S, Terakado M (2003) A comparison of new CBCT for dental use with a multidetectod row helical CT machine. Oral Radiol Endod 95:371–377
Villari N, Stecco A, Zatelli G (1999) Dosimetry in dental radiology: comparison of spiral CT and OPT. Radiol Med 97:378–381
Cohnen M, Kemper J, Moebes O, Pawelzik J, Moedder U (2002) Radiation dose in dental radiology. Eur Radiol 12: 634–663
Lecomber AR, Yoneyama Y, Lovelock DJ, Hosoi T, Adams AM (2001) Comparison of patient dose from imaging protocols for dental implant planning using conventional radiography and computed tomography. Dent Radiol 3:255–259
Hashimoto K, Arai Y, Iwai K, Araki M, Kawashima S, Terakado M (2003) A comparison of a new limited cone beam computed tomography machine for dental use with a multidetector row helical CT machine. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 95:371–377
Boone JM, Seibert JA (1994) An analytical edge spread function model for computer fitting and subsequent calculation of the LSF and MTF. Med Phys 21:1541–1545
Kim DO, Kim HJ, Jung H, Jeong HK, Hong SI, Kim KD (2002) Quantitative evaluation of acquisition parameters in three-dimensional imaging with multidetector computed tomography using human skull phantom. J Digit Imaging 15:254–257
Mah JK, Danforth RA, Bumann A, Hatcher D (2003) Radiation absorbed in maxillofacial imaging with a new dental computed tomography device. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 96:508–513
Araki K, Maki K, Seki K, Sakamaki K, Harata Y, Sakaino R, Okano T, Seo K (2004) Characteristics of a newly developed dentomaxillofacial X-ray cone beam CT scanner (CB MercuRayTM): system configuration and physical properties. Dentomaxillofac Radiol 33:51–59
Farman AG (2005) ALARA still applies. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 100:395–397
Ludlow JB, Davies-Ludlow LE, Brooks SL, Howerton WB (2006) Dosimetry of 3 CBCT devices for oral and maxillofacial radiology: CB Mercuray, NewTom 3G and i-CAT. Dentomaxillofac Radiol 35:219–226
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pasini, A., Casali, F., Bianconi, D. et al. A new cone-beam computed tomography system for dental applications with innovative 3D software. Int J CARS 1, 265–273 (2007). https://doi.org/10.1007/s11548-006-0062-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11548-006-0062-4